The 15' black G1S Series Guitar Cable from RapcoHorizon features two 1/4" connectors with an added shrink strain relief that utilizes a heat shrink process over the barrel of each connector. This cable utilizes an ultra flexible matte PVC jacket material for durability. This cable is terminated with high-quality, nickel-plated 1/4" connectors, which offer years of good performance and value. This cable is individually tested for performance and quality.

Hi-Z unbalanced instrument cable for interfacing instrument level gear with amplifiers (guitars, bass guitars, keyboards, and other unbalanced hi-Z signal sources)

Utilizing a serve shield for quiet operation, yielding maximum flexibility

Low capacitance cable offers an expanded frequency response

Matte jacket PVC material is very flexible yet durable with very low memory

Pure copper conductor and shield

Features an added shrink strain relief utilizing a heat shrink process over the barrel of each connector

Related Questions and Answers

Q: 1. Does this come with a tripod stand?

A: A tripod stand is not included. It will come with the contents seen in this photo our website https://bit.ly/3scTEPx

Q: 2. Where is this item - MMSA-115B manufactured?

A: This cable is manufactured in China.

Q: 3. is this loud enough for busking?

A: Yes, the FLY 3 was designed as a portable practice amp for use at home or while traveling and it is loud enough for performing in front of a small group of people. The sealed cabinet helps to project the sound and also to maintain low end.

Q: 4. Compatible with a9 ii?

A: Yes, it will be compatible with the a9 II

Q: 5. What does wired for low impedance mean? Are these wired out of phase? Please explain what wired for low impedance microphone means.

A: The cable in question is a standard mic cable. Low impedance alias lo-Z means it is a balanced load cable. There are 3 wires -- send, return, and ground. The connectors are the XLR type on both ends. All decent audio mics are balanced, lo-Z. Some are dynamic and some are condenser. Both use 3 wire. It is possible to get a cable that has a male TRS phono jack on the amp side, but most have a male XLR, just like the 3 prongs on the butt of your microphone. Balanced loads can travel long distances without losing signal. Unbalanced (2 wire) loads degrade after 10feet or so. Guitar cables are unbalanced in the typical case -- return wire acts as ground shield. Only the cheapest mics are unbalanced anymore. For more info, visit Wikipedia.

Q: 6. Will this House a dreadnought Guitar.? Im also looking at the SKB 18. What is the difference between the two?

A: Hi William, The 1SKB-18 is created for dreadnought shaped guitars. We do list all the dimensions of the case on B&H's website so you can compare to your guitar to see the best fit. Feel free to contact our customer service department if you have further questions. Thank you,Will

Q: 7. Will this work connecting a Canon r6 to an M1 MacBook for use with dragonframe?

A: Yes, the Tether Tools TetherPro USB Type-C Male to USB Type-C Male Cable (15', Orange) would be compatible with M1 MacBook using dragon frame.

Q: 8. Does this cable work with Canon 5D mark 111?

A: No, the Tether Tools TetherPro USB Type-C Male to USB Type-C Male Cable is not compatible. If your computer uses a usb-C cable you need this one, Tether Tools TetherPro USB Type-C Male to 5-Pin Mini-USB 2.0 Type-B Male Cable (15', Orange) BH #TECUC2415ORG • MFR #CUC2415-ORG https://bhpho.to/3DiLJXc

Q: 9. dimentions?

A: Dimensions (WxHxD)6.7 x 5.0 x 4.0 / 170.0 x 126.0 x 102.0 mm AmplifierWeight1.98 lb / .9 kg Amplifier

Q: 10. Will this work for tethering from nikon z6ii to LrC? I'm currently trying a few cables but nothing is being detected even after all the Adobe updates. Wasn't sure if it was this cable I would need specifically. Thanks!

A: Yes, the Tether Tools TetherPro USB Type-C Male to USB Type-C Male Cable (15', Orange) BH #TECUC15ORG is compatible with a Nikon Z6 II and a computer with USB Type C ports.