The 1.8" diameter ARRI Artemis Super Post Gen 2 1.8" 3B 10-Pinfrom ARRI Artemis Super Post Gen 2 1.8" 3B 10-Pinis compatible with artemis Gen. 1 and TRINITY Gen. 1 stabilizer systems. This telescoping, 3.9 to 6.6' replacement center post has an inner 1.5" diameter, a 1.8" ring diameter, and a 3B 10-pin LEMO connector.

For artemis Gen. 1 & TRINITY Gen. 1    6.6' Length Enables High/Low Positions    Center Post Replacement, 3B 10-Pin LEMO    Telescoping 3.9 to 6.6' Length    1.5" to 1.8" Post Diameter

• artemis Gen. 1
• TRINITY Gen. 1

Related Questions and Answers

Q: 1. I need to clamp this to a vertical varipole and have the stud also be vertical. Is there an alternative product that does this?

A: You could this clamp in conjunction with the extension arm, click the link below to view; https://bhpho.to/31W7tHI

Q: 2. Hi. Can I hold a 8 x 8 butterfly difusser and swivel to 90 degree horizontal, 90 degrees vertical and 45 degree??? Thanks for your answers.

A: You would attach the baby pins to gobo heads on your stands in order to swivel the frame to any position.

Q: 3. I see that the accessory attachment point is 1/4-20. Would it be OK to drill and tap this bigger to 3/8-16 to accommodate my new Matthews magic arm? I don't want to ruin the structural integrity of the clamp.

A: You can purchase Manfrotto 036-38 Standard Stud with 3/8" Screw B&H # MA03638 replacement stud.

Q: 4. The center hole is 1/4"-20. The two horizontal threaded holes are some other size. The two vertical holes are not threaded. Outside of the 1/4"-20 center hole uses, what accessories use these patterns?

A: The smaller holes on the back of the Super Clamp allow you to connect accessories to the Super Clamp. As an example, when holding multiple backgrounds on an autopole using a Super Clamp, you may connect the Manfrotto 045 Background Triple Hooks for Three Backgrounds (Box of 2), B&H # MA045, or the Impact Background Triple Hooks - Pair (Black), B&H # IMVPDH3W, via hex screws, or you may connect a single background hook such as the Impact ME-122P Single Background Holder Hooks for Super Clamps (2-Pack), B&H # IMME122P, which may be inserted into the hexagonal 5/8" hole on the back of the unit. There may be other accessories that would also work with the attachment points on a Super Clamp, but the ones listed above would be the popular ones and the ones we carry. We do also carry Super Clamp options that have a grip head connected to the Super Clamp, or connects two Super Clamps together.

Q: 5. I need to mount multiple magic arms to a single clamp, are there any adapters or accessories to allow this?

A: Trying to place multiple magic arms on one clamp can easily be over the weight limit that it can handle and we do not know of the existing way do to so.

Q: 6. Is this large enough to clamp securely to a 46mm diameter Varipole?

A: Yes, the Impact Super Clamp with T-Handle can fit an Impact Varipole.

Q: 7. Is this compatible with the SmallHD Cine 7

A: The ARRI artemis Monitor Bracket Gen. 2 for SmallHD (7") is not compatible with the SmallHD Cine 7 as the dimensions for the SmallHD Cine 7 and the SmallHD 703 are different.

Q: 8. WHAT ARE THE OUTSIDE DIMENSIONS ?

A: This Impact Super Clamp measures 1 5/8" wide by 4 7/8" long.

Q: 9. What is the depth of the two M5 threaded holes? (So I can purchase the right M5 bolt length) Thanks in advance.

A: The M5 threaded holes are 15mm deep.

Q: 10. Whats the benefit or T handle compared to ratchet handle?

A: The Impact Super Clamp with Ratchet Handle BH #IMCC106R can be tightened down with more force and also in positions where the Impact Super Clamp with 5/8" Snap-In Pin BH #IMCC106TSIP could not be twisted with adequate force.