Arri Vibration Isolator Gen 2 Srh Imperial Basic Set

Product Code: eq109246
Availability: In Stock

$16,290.00 $25,901.10

Qty

14 reviews Write a review

Description
Reviews (14)

Reduce unwanted motion in your remote head shots with the imperial threaded ARRI Vibration Isolator Gen 2 SRH Imperial Basic Setbasic set. This super-compact unit employs four polymer damping elements to absorb unwanted vertical and angular movements in your head's roll and tilt axes. It simultaneously maintains definition and stability in the pan axis, enabling the torque power for the pan axis to be maxed out when needed. This set bundles the Vibration Isolator Gen 2 with a Mitchell-mount castle nut, a wrench, and a hard-shell case to hold all the components.

Reduces Unwanted Roll & Tilt Vibration Maintains Torque Power of Pan Axis Vibration Isolator for SRH, Gen. 2 Mitchell-Mount Castle Nut & Wrench Mounts Directly or on Mitchell Plate Hard-Shell Case

General
Compatibility	ARRI Stabilized Remote Head
Threading	Imperial
Physical
Mounting	1x Mitchell Base
Dimensions	Not Specified by Manufacturer
Weight	Not Specified by Manufacturer
Packaging Info
Package Weight	27.625 lb
Box Dimensions (LxWxH)	21 x 17.2 x 9.4"

Reduces roll and tilt axis movements while maintaining torque and stability in your SRH remote head's pan axis

Related Questions and Answers

Q: 1. In the video you can see a part in between the isolator and the power base of the gimbal. What would that be the bridge between the two?

A: There are several manufacturers that make the DJI RS2 (Power) Base Plate.

Q: 2. Does this work on the RED Monstro?

A: If all you are looking for is to have the UDM readout function, then yes. You can use the sensor and display separately from the LCS. Simply mount the horns and display, connect the two units with the UDM sensor cable, and connect the display to an appropriate power output (D-tap or RS). Cable UDM-RS [K2.65240.0 (yellow cable)] Cable UDM-D.Tap [K2.0023553] If you want to have the UDM values and Lens Data readout on a WCU-4, you will need the following: WCU-4 UMC-4 + a lens motor and LBUS Cable Cable UDM-UMC [K2.6144.0] UDM-1 or if you wanted to have UDM values but no Lens Data readout on a third party hand unit, you will need the following: - CForce RF Motor + LBUS Cable - LCube CUB-1 Serial Convertor - Cable UDM-UMC [K2.6144.0] - UDM-1

Q: 3. Can it be installed on a suction cup with cheese plate such as Matthews 10" Vacuum Cup with Cheese Plate?

A: The Digital Photo solutions Vibration mount would work best with Suction cup mounting solutions that support the isolator like BH #CASK01. However it is a universal solution and could work with other suction cup mounting solutions like Matthews.

Q: 4. Can the 3/8 screw on top be removed?

A: The 3/8 top screw on the DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal is not removable.

Q: 5. Is the tension adjustable?

A: The tension on the DigitalFoto Solution Limited Vibration Isolator Dampening Head for Camera Gimbal can be adjusted by removing or adding the cables.

Q: 6. I'm looking for a way to reduce vibration while filming on a boat and am wondering if this could be mounted on a monopod?

A: The DigitalFoto Solution Limited HULK-ISO Shock Vibration Isolator has many mounting points that could be used with a MonoPod. The HULK-ISO will only help with motor vibrations and not the rocking and pitching motion of watercraft.

Q: 7. is this compatible with Elinchrom One and Three?

A: The Elinchrom Basic Grid Reflector Set with 30° Grid (7") is compatible with Elinchrom One and Three when used with the EL Profoto Adapter (Included with every THREE kit), https://bhpho.to/3mA6Ih8.

Q: 8. Will this work with a Ranger RX AS with S heads?

A: Yes this grid and reflector are compatible.

Q: 9. Does it have to be used with a particular mount?

A: The DigitalFoto Solution Limited HULK-ISO Shock Vibration Isolator is a universal solution. However if you are attaching a DJI Gimbal like the RS3 Pro or RS2 to the shock mount you would need a gimbal base adapter BH #DIPDRS2 https://bhpho.to/3BtjbLM

Q: 10. Is this compatible with the Elinchrom D-Lites?

A: Yes. will adapt to the built in speed ring the d-lites have to offer.

Trevor	12/09/2024
[Imperial] These are great - my operators love when I can use just one or two cforce mini motors on a LBUS-enabled camera. I love it too - keeps my build tight and lightweight. They're a good balance of torque and speed. Highly recommend! 5

Trevor	27/07/2024
[27.625 lb] The cforce mini motors are the reason I went for an ARRI focus system. They're the best thing out there for gimbal work, or any operator who loves their camera builds to be as small and light as possible. I recommend adding a larger gear for when you need to speed up the motor. 5

David	05/07/2024
[27.625 lb] I wanted to try out the new rare earth magnetic needle, which is supposed to be more stable, and less effected by near by metals. I haven't had this compass long enough to prove or disprove this claim. The compass housing is classic Brunton design. When closed the lid fully covers the compass base. The lanyard attaches at the lid hinge, which causes a problem laying the compass flat on the map unless the lanyard is tucked into the open space between the hinge and compass base. Sighting a land mark with the mirror is similar to other mirror compass designs. Sighting with the lid laid flat would be enhanced if there was a white sighting line on the inside of the lid below the notch. The needle settles reasonably quickly. When closed the rounded corners give it a nice comfortable feel in the hand. If it doesn't develop a bubble, as some previous Brunton compasses I've owned have done I will be happy with this compass. It also comes wtth 2 Topo Buddy Universal Scale Cards. Sandwiched between heavier stock cards to protect the scale cards. That are riveted at one corner so they can pivot out for use, which is open to permit attachment of a lanyard. The 2 scale cards cover most commonly used scales and also include UTM grid scales. The cards are to large to fit inside the lid, they measure 6.2 cm x 9.1 cm. approximately the size of the compass base. 5

Chris	04/07/2024
[Imperial] Own a trinity 1 and don’t own this? A must if you want your head properly balanced. Adds the needed weight to the bottom of the trinity much like the trinity 2 needs the weight at the top of the head. 5

Z geologist	01/07/2024
[Imperial] Bought this as a gift. my school uses the traditional 400 dollar bruntons, but they were a bit out of my price range. Purchased this instead and couldn't be happier. Very simple to use. 5

Mar	28/06/2024
[Imperial] Fantastic grip super cozy 5

Jinpyo	26/06/2024
[27.625 lb] It showed the best performance in the projects we worked on. 5

Yuki	09/06/2024
[Imperial] The picture is old version of it. This is basic set 2 and comes with the newer clamp. It works great as long as it gets good signal. 5

Robert	23/05/2024
[Imperial] This ARRI cforce mini motor completes the equation for our tabletop focus pulling. 5

Robert	23/05/2024
[27.625 lb] This set fits the FX9 perfectly. It's quick and easy to attach to the camera and has zero play in it. The bottom plate allows you to use a VCT-style tripod plate to quick transfer from hand-held to tripod mounted operation. The shoulder pad is comfortable. It also does not add very much height to the camera, thus keeping the center of gravity lower so as not to be top-heavy. The top plate has plenty of mounting locations on the top and all 4 sides to attach your accessories. The included top rail mounting bracket allows you to use rails to mount accessories on the top of your camera. This is a very high quality, wonderfully engineered product. The name Arri stands for extreme quality in the world of high-end production, and this setup for the Sony FX9 will not disappoint. I can and do highly recommend this product. 5