The 10' black RapcoHorizon HOGMPRO-10 XLR Microphone Cable 10'is engineered to provide accurate signal transmission when connecting mics to mixers, preamps, or audio interfaces in professional settings.

To provide rejection of RFI and EMI, the HOGMPRO-10 uses two 20-gauge center conductors that are paired and twisted and a braided shield made of pure copper. Its PVC jacket is flexible yet durable with low memory. The cable is terminated with Neutrik black shell XX Series XLR connectors, featuring gold-plated contacts, and it's individually tested for performance and quality before shipping.

XLR-F to XLR-M Cable    For Professional Applications    2 x 20 AWG Pure Copper Conductors    Neutrik Black Shell XX Series Connectors    Gold-Plated Contacts    85% Pure Copper Braided Shield    Rejects EMI and RFI    Flexible and Durable PVC Jacket    Made in the USA    Limited Lifetime Warranty

• Black 10' ROADHOG-PRO-M.K microphone cable
• For professional musicians and studio performers—part of the company's highest-quality line of microphone cables
• Neutrik black shell XX Series XLR connectors with gold-plated contacts
• Two 20-gauge center conductors, paired and twisted
• Pure copper conductor and braided shield
• 85% shield coverage protects against RFI/EMI and provides increased flexibility
• Matte jacket PVC material is very flexible, yet durable with very-low memory
• Hand-soldered
• Individually tested for performance and quality
• Made in the USA

Related Questions and Answers

Q: 1. Is the xlr connector balanced or unbalanced? Will this work with Sennheiser ew100 series receivers?

A: This Comprehensive cable is not going to work as an output cable for a Sennheiser ek100 camera-mountable receiver. The 3.5mm end needs to be a locking 3.5mm TRS connector and the XLR connector would need to be male. The Sennheiser CL100 cable (B&H# CL100) is the same cable that is included with the ek100 receiver and in ew 100 series wireless microphone systems that include the camera0mountable receiver. This cable is unbalanced. The Sennheiser CL500 cable (B&H# SECL500) is the same balanced receiver output cable that is included with the ek500 receiver and with ew 512P and ew 500 FILM wireless mic systems.

Q: 2. Can this cable work on bebob 2 dual charger which has 16.5V and 5A output ?

A: Yes it can.

Q: 3. What is the voltage capacity of this cable ?

A: this is a stantard 4pin XLR camera power cable and hence is designed for 12v

Q: 4. Does it also supply power to the mic?

A: The On-Stage MC12-10U' Microphone to USB Cable does not specify the ability to supply power such as 48V phantom for microphones that may require it. This cable is suited for use with dynamic microphones that do not require power from the cable source.

Q: 5. Is the length the length of the core or does it include the fanout ends?

A: The length specification for the Sescom 8-Channel XLR Male to XLR Female Audio Snake Cable (10'), BH # SE8XM8XF10, is an inclusive end -to-end measurement.

Q: 6. How long are this cable?

A: Hello AL P, it is just about half a foot from tip to tip.

Q: 7. Can anyone confirm what TYPE this 10-pin Lemo connector is: the 1B or the 2B? Atomos' website/manual gives no specs. Thanks

A: Hello JIm K, they are Atomos Spec, this is NOT a Lemo or made by LEMO. it only works with our products. thank you.

Q: 8. Will this also connect/work with to a birddog p240 for audio in/out?

A: The Atomos 10-Pin LEMO Type to XLR Breakout Cable for Shogun has not been tested for compatibility with the birddog p240 for audio I/O.

Q: 9. Does Atomos or anyone make a 90 degree version of this cable?

A: Hello Jason P, unfortunately we do not no.

Q: 10. How far can I seperate my monitor? Will it vary if I order 6 or 10 feet?

A: All of our Kopul XLR Y Cables separate halfway down the cable, so at a maximum you could separate them a distance equaling the total length of the cable. (The 6 foot sill separate 3 feet down, leaving two 3 feet lengths after the split, the 10 foot will separate 5 feet down, etc.)