The Kramer 4K Auto-Switcher/Scaler Kit HDBaseT Wall-Plate FrameKIT-401 Kramer 4K Auto-Switcher/Scaler Kit HDBaseT Wall-Plate Frameis a high-performance auto-switcher/scaler kit for 4K HDMI and VGA over long-reach HDBaseT. The kit includes the KIT-401T wall-plate transmitter/switcher and the KIT-400R receiver/scaler. The KIT-401T transmitter converts the user-selected input signal into the transmitted HDBaseT signal. The KIT-400R receiver receives the HDBaseT signal, converts it to HDMI and up- or down-scales the picture to match the resolution of the HDMI monitor. KIT-401 extends video signals to up to 130' over CAT copper cables at up to 4K@60 Hz (4:2:0) 24bpp video resolution and provides even further reach for lower HD video resolutions.

Supports up to 4K@60 Hz    Up to 130' at 4K@60 Hz (4:2:0)    Up to 230' at 1080P60    PoC Powered

• Simple and Powerful Maestro Room Automation: intuitive user interface enables you to fully automate your meeting room elements. Configure lights, shades, devices, and more to be activated by an extensive range of triggers, including scheduling, input/output connectivity, routing, and button pressing. By minimizing user intervention, Maestro room automation saves meeting prep time and minimizes human error before presentations.
• HDMI support: HDCP 1.4 / 2.2. 4K60, CEC, xvYCC color (on input).
• PoC (Power over Cable) enabled: power only one of the units. The other unit of the receiver/transmitter pair is powered via the HDBaseT extension.
• 2 Local and 1 remote source: with auto-switching of the live source to the HDMI display on the output at the receiver. The transmitter has an HDMI and a VGA input, with a dedicated audio jack, and there is an additional HDMI input on the receiver side.
• Audio de-embedding: output the HDMI audio to a balanced stereo output on the receiver side, and an unbalanced stereo output on the transmitter side.
• Bidirectional RS-232 Extension: serial interface data flows in both directions, allowing data transmission and device control.
• I-EDIDPro Kramer Intelligent EDID Processing: intelligent EDID handling, processing and pass-through algorithm that ensures plug-and-play operation.
• Easy Remote Device Control: control devices connected to KIT-401 from the user-friendly Kramer Aware interface on the KIT-401 embedded webpages. You can also access the interface using the Kramer Aware app on a compatible Kramer touch panel.
• Convenient unit control and configuration options; local control via front-panel source and output switching buttons, DIP-switches for configuring connection priority, and OSD menu. Distance control via user-friendly embedded web pages via Ethernet, Protocol 3000 API, RS-232 serial commands transmitted by a PC, touchscreen system or other serial controller and relay switches.
• Easy, cost-effective maintenance: local firmware upgrade via USB connector. Easy and elegant installation: installation is fast and cost-effective via a single CAT cable, providing both video signal and power (PoC) connections. The transmitter compactly fits into standard US 2-gang in-wall box size, supporting decorative integration with room deployed user interfaces such as electrical switches. The compact MegaTOOLS fanless receiver enclosure for dropped-ceiling mounting, or side-by-side mounting of 2 units in a 1 RU rack space with the recommended rack adapter.

Related Questions and Answers

Q: 1. is theer any sample of video of the picture it produces?

A: At this time we do not have any sample videos available for this camera. However you may be able to find clips if you did a search on websites like Youtube and Vimeo.

Q: 2. Does it have Croma Key?

A: The Datavideo HS-1600T Mark II does not have a chroma key feature.

Q: 3. In our scenario we would want to have 2 input signals and input one would be feeding both outputs and under fault scenario input 2 would go to both outputs. - Also do you have a computer input card to put second signal back into another computer? Thanks Brent

A: This unit should work for you. It has 2 inputs, with one input going to both outputs and the other input on stand-by. If the first input drops, the 2nd input will take over and be sent to both outputs. We have SDI Capture Cards from Magewell as well. SDI Internal Capture Card - https://bhpho.to/2yU3GvD SDI USB Capture Card - https://bhpho.to/2AMiM5Y

Q: 4. Does the unit switch upon sync loss or image loss? Is there a sensitivity setting if the latter?

A: This will switches to the secondary input when the primary input is lost. It does not specific sync or image, but in either case the signal will be lost and require going to the other input.

Q: 5. is this can directly push the HDBaseT Interface video directly into a server?

A: Not that we are aware of. HDBaseT is a system that allows for sending an HDMI signal over Cat6 cables for the purpose of allowing longer distances than typically available though a standard HDMI cable. It is not an IP format which you'd connect to a network directly. For that you may want to look at the PTZOptics PVTL-ZCAM 2.07MP 3G-SDI Box Camera with 4x Zoom Lens, B&H # PTVLZCAM instead. https://bhpho.to/2GIZNhP

Q: 6. How seamless is the switching? Is there any video "tearing"?

A: IOGEAR says : Thank you for choosing IOGEAR. Video tearing is present however it is minimal . This is only present when switching ports. Once again, thank you for choosing IOGEAR.

Q: 7. Is it possible to attach an IR extender? I plan to put this out of sight, but still want remote functionality.

A: Unfortunately we are not aware of an IR extender for this product.

Q: 8. I want to hook up 4 Xbox Ones to 1 large TV or projector. Will this work? Would the HDMI audio just combine between all Xboxes?

A: This is a switcher that allows you to connect 4 HDMI sources and select a single one for the output. The audio for the selected source is what you will here. It sounds like you are looking for a Multi viewer which is a product that takes in multi inputs and allows you to show them all on a single screen. https://bhpho.to/2R0BqiT

Q: 9. Is there a lag in the output video after switching among inputs?

A: With switchers like this there will tend to be a delay when switching from input to input. However we are not aware of any lag once the video has been switched.

Q: 10. Can the Kramer VS-4X be used for one input with output to one of four selected outputs? (Signal in opposite direction from the labeled inputs and outputs.)

A: The VS−4X is a high−performance switcher for balanced stereo audio signals on XLR connectors. It switches any one of four stereo signals to a single stereo output.