You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Nisi S6 150mm Filter Holder Kit For Laowa Ff S 15mm F/4.5 Lens

Nisi S6 150mm Filter Holder Kit For Laowa Ff S 15mm F/4.5 Lens
  • Product Code: eq109579
  • Availability: In Stock

$1,647.00 $2,075.22

This NiSi S6 150mm Filter Holder Kit for Laowa FF S 15mm f/4.5 Lensfrom NiSi S6 150mm Filter Holder Kit for Laowa FF S 15mm f/4.5 Lensfeatures two filter slots for the convenient use of up to two 150mm wide, 2mm thick square or rectangular filters. Each slot is designed to grip an installed filter only along the surface of the filter's edges, so contact with a filter's front or rear-facing surfaces is avoided. Positioning filters is particularly important when using 170mm-long graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot. The S6 system allows the filter holder to rotate, and it has a lock to hold it in position. The filter holder supports the use of a rotating circular CPL.

This is the same filter holder found in the NiSi S6 Filter Kit. It is the filter holder only and does not include the required S6 adapter rings.

Supports 1 Circular/1 Rectangular Filter    S6 150mm Filter Holder Frame    Adapter for Venus Laowa FF S 15mm f/4.5    Circular CPL    Lens Cap    Pouch for Entire Kit

Physical
Filter Capacity2x 150 x 150 mm, 150 x 170 mm (2 mm Thick)
Packaging Info
Package Weight0.32 lb
Box Dimensions (LxWxH)7.7 x 6.8 x 0.7"

  • Compatible with NiSi S6 150mm Filter Holder Kit
  • Filter holder only; requires S6 adapter rings
  • Holds two 150mm wide, 2mm thick filters
  • Compatible with 150 x 150mm and 150 x 170mm filters
  • Pull-and-release locking pin on the filter holder allows a reliable connection
  • Lock design locks the holder to an adapter ring

Related Questions and Answers

Q: 1. What is "Shift Lens Support"?

A: The shift lens support refers to the Venus Optics Shift Lens Support for Laowa 15mm f/4.5 Lens, BH # VELS1545 which is compatible with this lens. https://bhpho.to/3qVvwRT

Q: 2. Is Nid Is the NiSi 150mm holder compatible with Sony's 14mm FE 1.8 lens?

A: The NiSi S6 150mm Filter Holder Kit with True Color NC CPL for Sony FE 12-24mm f/2.8 GM Lens can be adapted to the Sony 14mm f1.8 lens with this adapter: https://bhpho.to/3DpaAs3

Q: 3. Is the len hood detachable? Can I use a generic 100mm square filter holder with generic 100m sqaure filter on it? Thanks.

A: The petal-shaped lens hood is built-in, not removable, and not reversible. Unfortunately, this means generic or third-party filter holders won't work. Laowa has a magnetic filter system for the lens coming soon, and it seems that will be the only way to get 4x4" or 4x5.65" size filters to work with the lens.

Q: 4. Can this filter holder be used on other lenses through an adapter ring, or is it strictly made for the Laowa 12mm?

A: I have a bad experience with the Nisi 10 stop square ND filter on this kit attached to the Laowa 12 mm f2.8. There is a round double strip of light in the picture and it is because the filter does leak some light in the holder to the lens, despite the filter comes with a round strip on the borders, to prevent that leakage. If there is anyone who experience this problem, it would great to get some input. Jose

Q: 5. Can this be used with other Z lenses with 77 and 82 mm filter threads by attaching step-up rings to the adaptor ring?

A: Yes, in order to use the NiSi S6 150mm Filter Holder Kit with True Color NC CPL for Nikon NIKKOR Z 14-24mm f/2.8 S Lens on lenses with 77mm and 82mm filter threads, you need the NiSi S6 150mm Filter Holder Adapter Ring for Standard Filter Threads (105, 95, and 82mm), BH #NIS6FHR8295, and the NiSi 77-105mm Adapter for S5 150mm Holder for Standard Filter Threads, BH #NIADSFT77105.

Q: 6. Will this product works well on the Laowa 12mm with the magic shift converter for Sony? Will there be more vignetting than usual?

A: I don't have experience with this on the magic shift, It mounts on the front bayonet, The magic shift appears to be rear mounted. So--I don't think it will interfere, bit that is not definitive.

Q: 7. Can I use 100 x100 square filters with this holder?

A: this filter is for 150mm lenses, it would not hold 100mm filters.

Q: 8. Is there a hard stop at infinity? If so, how accurate is "infinity"? (Nikon-Nex)

A: yes there is

Q: 9. Can this lens be used with the Laowa Magic Format Converter for Canon EF to Fuji GFX?

A: Yes, the Venus Optics Laowa 15mm f/4.5 Zero-D Shift Lens for Canon EF would be compatible for use with the Venus Optics Laowa Magic Format Converter for Canon EF to Fuji GFX.

Q: 10. Does this produce optical flare? I found other bulbous lenses have issues with flare in the form of colored spots opposite strong light sources.

A: Flaring can occur when using the lens aimed or directly hit by a focused light source at certain angles, but the flare is managed quite well compared to other lenses as the lens has an anti-reflective coating also helps to control flare and ghosting for heightened contrast and color rendering. If the light source is in the frame, flare is controlled rather well. If the flare is on the edge of the frame, it may be more noticeable, but can usually be reduced/eliminated by slightly recomposing the framing of your image.

13/09/2024

[0.32 lb] I shoot a lot of indoor, low-light stuff, so I needed to invest in the f/2.8 Sigma lens (can't afford those extra stops in Canon). Begrudgingly got this for landscape photos, and wish I'd never waited!


Yes, it's a drag to carry all these pieces around, but the results, well ...

5
09/09/2024

[0.32 lb] Due to the fact that the Sigma 14-24mm f/2.8 DG HSM Art, does not have a tread, so the specific custom made Adapter gives the secure method of working with Polarizer and Nd Filters

I recommend everyone to use this combination

5
05/08/2024

[0.32 lb] I’m using it on the Leica 14-24 SL on the SL3 and it works just fine. BH delivery was fast and item as described in perfect condition.

5
01/08/2024

[0.32 lb] The NISI Filter Holder is designed to safeguard not only the Holder but the Filters and Polariser

As well it can be fixed onto each Tripod to have the best access to the filters at any place you will shoot successfully

5
25/07/2024

[0.32 lb] NISI S6 offers a very solid combination within 3d made Adapters so in the field working gives a great secure way of capturing master files

5
23/07/2024

[0.32 lb] This NISI S6 150mm Filter Holder Adapter Ring for standard filter threads is a wonderful product that is cost effective with the step up rings. Fabricated from high quality aluminum, makes this holder dependable and lasting. This holder can be fitted wit a NISI circular polarizer and two filters to produce award winning images. B&H delivers some of the best products made and on time. Thank you, B&H!

5
22/06/2024

[0.32 lb] Fully pleased with the product and, of course, B&H.
There is only so much any vendor can do to accommodate the requirements to get a circular polarize r to fit this lens. NiSi does it perfectly! B&H brought it to me!
Many thanks to NiSi AND B&H for providing it! I am now a NiSi fan!

5
18/06/2024

[0.32 lb] Using this filter holder on large format 8x10 camera lenses that have 105mm and 120mm Filter threads. It's well made and thin enough to clear wide angles.

5
17/06/2024

[0.32 lb] NISI S6 is excellent for the sigma 14 f/1.8 DG HSM ART

I works fantastic

5
15/05/2024

[0.32 lb] The Nisi S5 protective Lens Cap is great for protecting and keeping your polarizer clean when carrying your camera with the filter attached to the adapter and mounted to your lens. Saves having to take it all apart when moving locations or if you have some time to wait, like waiting for sunrise. The cap is well made and fits perfectly!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Nisi S6 150mm Filter Holder Kit With Pro Cpl

$1,407.00 $1,843.17

Nisi S6 150mm Filter Holder Frame

$156.00 $249.60

Nisi S6 Pro Nc Uv Filter For 150mm Holder

$480.00 $748.80

Nisi S6 Pro Cpl Filter For 150mm Holder

$705.00 $1,015.20

Products You May Like

72mm Sensei Wide-angle Rubber Lens Hood

$26.85 $35.98

Dynaudio Acoustics 9s Active Subwoofer 9.5" 300w

$3,447.00 $4,481.10

Kase 200mm F/5.6 Mc Reflex Lens Sony E

$1,799.85 $2,645.78

Ha4000 Pro Headphone Amplifier - On-stage

$128.85 $168.79

Projector And Motorized Screen

$8,402.40 $11,259.22

Yc Onion Yolobox Pro Cage

$447.00 $607.92

Smart Rx Series 75" Uhd 4k Touchscreen Monitor

$14,247.00 $21,085.56

Proaim Vega Video Jib Arm 8ft Seo Title

$477.00 $648.72

Kat Kt-200 Drum Module Wiring Harness

$539.97 $799.16

Manfrotto 190x3 Tripod With Mhxpro-2w Fluid Head

$1,197.00 $1,580.04