You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Sennheiser Ew-dx Em 2 Dante Rackmount Receiver 520-607 Mhz

Sennheiser Ew-dx Em 2 Dante Rackmount Receiver 520-607 Mhz
  • Product Code: eq109678
  • Availability: In Stock

$4,197.00 $6,295.50

The Sennheiser EW-DX EM 2 DANTE Rackmount Receiver 520-607 MHzis a half-rack, dual-channel digital wireless receiver with Dante networking capabilities and compatible with EW-DX SK bodypack, EW-DX SKM handheld, and EW-DX TS tabletop transmitters. Housed in a rugged, all-metal chassis built to withstand the rigors of professional use, it can either sit on a tabletop or be rackmounted (with the included rackmount set) for portable rigs and permanent A/V installs.

The wide 87 MHz tuning range, intelligent switching diversity, auto-scan, equidistant tuning grid, and Link Density mode work to provide rock-solid wireless performance and massive channel counts, even in challenging RF environments. Bluetooth capabilities allow you to remotely sync components and change settings from your phone using the Smart Assist app, while Sennheiser's Control Cockpit and Wireless Systems Manager software provide computer-based control for more extensive networked setups. The EW-DX EM 2 DANTE receiver is backward-compatible with EW-D components.

For EW-DX Wireless Systems    2-Channel with Dante, 1/2 Rackspace    Switching Diversity, Equidistant Grid    Wide 87 MHz Bandwidth, 3480 Frequencies    Standard and Link Density Mode    Bright OLED Display    Set Up/Operate from Phone via Bluetooth    Network-Enabled for Monitor and Control    Secure AES 256 Encryption    Expandable to 293 Channels/330' Range

Key Specs
Wireless TechnologyDigital UHF
DiversityIntelligent Switching Diversity
Max Operating Range328.1' / 100 m (Line of Sight)
Receiver TypeTabletop / Rackmount
Number of Audio Channels2
Audio I/O2x XLR 3-Pin Male Balanced Output
2x 1/4" TS Female Unbalanced Output
Network I/O3x RJ45
Power RequirementsAC/DC Power Adapter, PoE
Parameters
Number of RF Channel Frequencies3480
DiversityIntelligent Switching Diversity
RF Frequency BandR1-9: 520 to 607.8 MHz
RF Bandwidth87 MHz
Frequency Step Size25 kHz
RF Channel ScanningAuto-Scan
Max Operating Range328.1' / 100 m (Line of Sight)
Max Transmitters per Band293
Mobile App CompatibleYes: Android & iOS
Bluetooth5.1 LE
Bluetooth Operating Distance120' / 36.6 m (Transmitter Sync, App Control)
Latency1.9 ms
Receiver
Receiver TypeTabletop / Rackmount
Mounting OptionsRackmount (with Included Hardware)
Rackmount Size1 RU (1/2 Rack)
Antenna2x 1/4 Wave Rod, BNC (Rear-Mount)
Number of Audio Channels2
Audio I/O2x XLR 3-Pin Male Balanced Output
2x 1/4" TS Female Unbalanced Output
Audio Output Level+18 dBu (Max)
+12 dBu (Max)
Frequency Response20 Hz to 20 kHz +3 dB
Network I/O3x RJ45
Network ProtocolsDante, TCP IPv4, TCP IPv6
Word Clock I/ONo
USB/Lightning ConnectivityNo
Standalone Audio Interface CapableNo
RF Output Power10 mW (EIRP)
Power RequirementsAC/DC Power Adapter, PoE
AC/DC Power Adapter11 to 13 VDC (Included)
DC Input Power12 VDC
AC Input Power100 to 240 VAC, 50 / 60 Hz
Display & Indicators1x OLED (AF Level, Channel, Frequency, Output Level, RF Level, Transmitter Battery Status)
HousingMetal
Operating Temperature14 to 131°F / -10 to 55°C
Operating Humidity5 to 95%
Dimensions8.3 x 1.7 x 7.4" / 212 x 44 x 189 mm
Weight2.2 lb / 1 kg (without Antenna)
Packaging Info
Package Weight5.925 lb
Box Dimensions (LxWxH)17 x 13.8 x 3"

  • The EW-DX EM 2 DANTE operates in the UHF band, far away from potential Wi-Fi interference in the 2.4 GHz band.
  • The UHF transmission greatly enhances range (up to 330') and the wide 87 MHz bandwidth gives you the ability to find a clean channel from 3480 available frequencies.
  • Intelligent Switching Diversity offers effective protection against multipath and other anomalies that cause RF interference. The system compares incoming signals on two independent antennas and receiver circuits to ensure optimal wireless quality. The receiver switches between antennas only during header data as to never affect the audio information.
  • Sennheiser's equidistant tuning grid removes the need for frequency coordination and enables you to operate up to 146 mic channels simultaneously.
  • For complex systems requiring even more mics, engage the Link Density mode for up to 293 channels on the same system.
  • AES-256 encryption keeps your transmissions private and safely protected from unauthorized users.

  • The EW-DX EM 2 DANTE receiver offers intuitive front-panel controls and a high-contrast OLED screen with meters for RF, battery status of the associated transmitter, and audio output that make setup a breeze.
  • The auto-scan function automatically seeks out the cleanest available frequency for you.
  • The receiver pairs with the transmitter via Bluetooth from up to 120' away, enabling you to quickly pair the mic directly from the stage without having to bring it close to the receiver.
  • The back panel houses two balanced XLR outputs and two unbalanced 1/4" outputs for direct connection to any PA system or mixing board.
  • The unit comes with a kit for rackmount installation and a universal power supply with EU, US, and UK adapters.

  • With the Smart Assist app (free download available separately) installed on your Android/iOS phone/tablet, the power of Bluetooth connectivity puts full control of the EW-D EM 2 right in the palm of your hand. Use your mobile device to connect via Bluetooth for efficient operation and monitoring of your system.
  • Sennheiser's Control Cockpit software for Windows allows you to view all the devices across your network, check the microphones in use, monitor battery life, troubleshoot problems, and adjust settings.
  • For larger setups, Sennheiser's Wireless Systems Manager provides frequency planning and coordination and real-time monitoring of RF and audio levels. It also allows you to import frequency scans from third-party devices and conduct walk tests and receiver bandwidth scans.
  • The system supports third-party interface plug-ins for easy integration into any controlled environment.
  • Dante ports allow you to integrate the receiver into your Dante network and distribute the digital audio anywhere you need it in your facility.

  • The rear-mounted, 1/4-wave detachable antennas can be upgraded to longer, 1/2-wave dipole antennas (available separately) for added range and reliability; you can also choose an ADA UHF Active Antenna or the AWM Wallmount Antenna as well.
  • For setups with multiple receivers, the EW-D ASA Splitter allows you to split and distribute a dual-antenna signal across four receivers for clearer reception without the intermodulation problems that can occur when multiple antennas are used.

Related Questions and Answers

Q: 1. If used with a the EW-DX EM 4, could use the antennas from the EM 4 by using the RF out of the EM 4 to the RF in on the EM 2?

A: Yes, the RF in of the Sennheiser EW-DX EM 2 DANTE Two-Channel Digital Rackmount Receiver can be connected to the RF out (A and B) of the Sennheiser EW-DX EM 4 DANTE Four-Channel Digital Rackmount Receiver to utilize the 2 x 1/4-Wave Rod Antenna.

Q: 2. Is this bodypack transmitter compatible with the Sennheiser EM 6000 Receiver?

A: The Sennheiser EW-D SK Digital Wireless Bodypack Transmitter (Q1-6: 470 to 526 MHz) is only compatible with EW-D receivers. The EM 6000 is designed for the SK 6000 and SK 6212 transmitters. It is also compatible with SK 9000 bodypack and SKM 9000 handheld transmitters operating in Long Range mode.

Q: 3. Does this fit the EM 100 G4 receiver unit?

A: Hi Gene - the GA 4 rackmount kit is designed to be used with evolution Wireless D1 - for your EM 100 G4 system, the correct model number is: GA 3 (Sennheiser P/N: 503167)

Q: 4. Can the EW-DX EM 2 be used with an ASA-214 antenna splitter?

A: The Sennheiser EW-DX EM 2 Two-Channel Digital Rackmount Receiver is compatible with the Sennheiser EW-D ASA antenna combiner.

Q: 5. Does this fit the new EW-D receiver?

A: The Sennheiser EW-D EM receiver comes with a dedicated rackmount kit for mounting either a single receiver or two receivers together in a standard 19" rack. The GA 4 Rackmount Kit is designed for use with the EM D1 receiver and the dimensions of this receiver are slightly different from those of the EW-D EM receiver. The EM D1 is a bit smaller. At this time Sennheiser does not offer a separate rackmount kit for the EW-D EM since it is included in the box with the receiver. But you can contact Sennheiser directly if you need replacement parts.

Q: 6. Can you cascade two receivers in order for them to share 2 antennas?

A: To share antennas with two or more Sennheiser EW-D EM Digital Wireless Receivers, Sennheiser recommends using the EW-D ASA 4-Way Active Antenna Splitter with DC Distribution for EW-D Wireless Systems (B&H # SEEWDASAQRS). The EW-D ASA provides an RF active feed for up to four receivers.

Q: 7. are These antennas compatible with Sennheiser G4 EW100 Receivers?

A: Yes, the Sennheiser HALF WAVE DIPOLE Half-Wave Antenna Rods for EW-D EM Receiver are also compatible with EW100 G4 receivers operating within the 470 to 550 MHz frequency range.

Q: 8. are these antenna compatible with the XSW Band A iem?

A: The Sennheiser HALF WAVE DIPOLE Half-Wave Antenna Rods for EW-D EM Receiver are not intended for use with an IEM transmitter.

Q: 9. Does this receiver have a warranty with it and if so, how long does it last and what does it cover?

A: Many Sennheiser products, including the Sennheiser EM 100 G4 Wireless Receiver have a Limited 2-Year warranty. You will find the specifics of the warranty terms and conditions here: https://en-us.sennheiser.com/service-support-services-warranty-conditions

Q: 10. What kind of headset microphones are recommended?

A: There are many available headset microphone options compatible with the Sennheiser EW-D SK Digital Wireless Bodypack Transmitter. A compatible option will have a locking, Sennheiser-wired 3.5mm connection. Headset models from Countryman, DPA, as well as Sennheiser's own headsets are some of the top choices. Application dependent specifications such as cardioid or omnidirectional pickup pattern and color options should also be considered. This search link filters compatible options in this category: https://bhpho.to/351vHVr

16/08/2024

[5.1 LE] This is my first experience with this piece of equipment and I'm happy because I don't have to use two separate receivers with the microphones. Quite convenient.

5
15/08/2024

[5.925 lb] Great, well-built unit. Easy to set-up. Works perfectly!

5
14/08/2024

[12 VDC] Restored several broken units

5
05/08/2024

[Digital UHF ] We use exclusively Sennheiser wireless equipment, and have never had a failure while performing. Added this to our rack the day of the show and it performed flawlessly. B&H ALWAYS delivers. Amazing product from an amazing distributor.

5
29/07/2024

[12 VDC] Because the Sennheiser receiver amplifier does not come with antennas these are a must have to boost the signal of the woefully inadequate antennas that come with the Sennheiser receivers. These are inexpensive and work well.

5
11/07/2024

[293] three of these for video depositions. being as they are considerably different than the Shure set-up Ive been using for some years it took a little bit to learn their idiosyncracies. It has no problem telling me a given channel is not working very well but to change and then synch the bodypack is easy. painless. FAST. I'm using them with the SK XSW A bodypacks and the ME 2ii lav mics. They sound great. NB: I'm not putting a lot of distance between TX and RX. 20 feet? But a party left the room with her TX and, well, I muted her on my end when I heard suddenly talking to another party way down the hall... MY biggest thing was foorprint! I don't have the luxury of a lot of horizontal surface in my gig. Having TWO channels in each of 3 small boxes means everything. That's why I liked the Shures so much, until I didn't ( 5? 6 years? ) anymore. Pricey? A little bit. I've been around long enough - you get what you pay for.

5
02/07/2024

[3x RJ45] Had originally paired a Sennheiser lapel body pack and handheld microphone to save expense. Then there was a need for these mics to be used simultaneously so needed to find an additional receiver and B&H worked with me in identifying one. It works well as a Sennheiser is expected to. Thank you B&H for the help your Sales stafferdid in finding the right equipment. The new receiver works great with the older microphone. It works as one expects a Sennheiser to work. Other wholesalers were not helpful but B&H was very helpful. Thanks, a Very satisfied customer.

5
13/06/2024

[17 x 13.8 x 3"] I specifically got this unit because it does not operate in the 2.4 GHz bandwidth which is unbelievably overcrowded at the moment. I actually think the sound quality is a little better than my Line 6 Relay G90 unit that I have been using for the past five years. I used this system over the weekend in a casino where my line 6 unit had severe drop out issues due to the 2.4 GHz bandwidth. This unit performed flawlessly and I am very happy with it. The obvious weak link in this system though is the guitar cable which seems to be very cheap. I went ahead and ordered Neutrik connectors and bulk cable and made a couple of my own cables which are bulletproof. Overall you cannot beat the system for the quality and reliability in this price point.

5
07/06/2024

[1.9 ms] Bought this product to replace my original damaged one, it works flawlessly

5
26/05/2024

[3x RJ45] Wonderful product and quality!

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Sennheiser Ew-dx Em 4 Dante Rackmount Receiver

$9,897.00 $15,241.38

Sennheiser Em-xsw 1-a Receiver 548-572 Mhz

$537.00 $730.32

Products You May Like

Foama Studio Case For Red V-raptor - Red Insert

$2,172.00 $3,236.28

Qsc Ap-5102 10" Cinema Surround Loudspeaker

$4,350.00 $5,437.50

Flir E8 Pro Thermal Camera For Professional Use

$10,497.00 $15,115.68

Canon Pfi-1700 Cyan Pigment Ink Tank 700ml

$951.00 $1,160.22

Novoflex Negative Mask Ms-filmcop 6x4.5cm

$179.97 $250.16

H&y Revoring Magnetic Cap Set 46-62mm

$64.02 $90.27

B+w Uv-haze 010 Mrc Master Filter 49mm

$149.85 $209.79