The white CTA Digital VESA Desk Wall Mount Whiteallows you to fully tilt your tablet to face the opposite direction. The sturdy metal base can be permanently mounted to any horizontal surface via pre-drilled holes, but is also heavy enough for use even without screwing it down. Or, use the included hardware to attach the mount to a wall. The VESA plate rotates along the center cross-bar, allowing for use in either portrait or landscape orientation. The 75 x 75 and 100 x 100mm VESA mounting patterns are compatible with a wide range of devices including the CTA PAD-PARAW Paragon enclosure, available separately. A pre-drilled hole through the center of the mount allows for the addition of a Kensington security cable, also available separately.

Mounts to Desk or Wall    Portrait & Landscape | Tilt Adjustable    Heavy Duty A-Frame Base    75 x 75 & 100 x 100mm VESA Compatible

• Heavy duty black metal A-frame base
• Portrait and landscape orientation
• Allows you to quickly flip a tablet for use by a second person
• Optimized for home, office, reception desks, waiting rooms, retail stores, and more
• Compatible with 75 x 75 and 100 x 100mm VESA mounts
• Compatible with CTA Digital Paragon enclosures and other VESA-compatible device holders or monitors

Related Questions and Answers

Q: 1. If I add 2 of these extensions: Ergotron LX 9 Extension Arm for LX-Series Mount: would I be able to mount the 2 Acer 38 Displays that I just gota so from B&H? :)

A: No, the largest flat screen you should ever mount to this dual mount application is two 26 flat screens--anything larger and the arm won't hold the load.

Q: 2. I can't understand the decription. But if I have two 27 monitors, will this fit?

A: I have two Dell Professional P2714H ? 27 Monitors on mine and it works well.

Q: 3. How wide can the arms extend to the sides. I'm trying to mount the monitors so they flank the side of a 27 in iMac? Thanks

A: 25 from the center on each side.

Q: 4. Will this fit a BenQ HT3550?

A: Hello, we regret to inform you that his is only compatible with the BenQ Ultra Short Throw Projectors. The HT3550 is a short throw projector that would not be compatible with this mount.

Q: 5. What is the max size of the C-clamp? / How thick of a desk will this fit to?

A: The clamp will accommodate up to about 2inches

Q: 6. would it fit HT1075?

A: This mount is only designed for use with the Ultra Short throw .3:1 projectors. If you would like to wall mount that HT1075 you can use a mount like this, but it's not a short throw projector. It's designed to be 12-16' from the screen: a href= http://www.bhphotovideo.com/c/product/788797-REG/Premier_Mounts_EST200_Dual_Stud_Short_Throw_Projector.html target= _blank http://www.bhphotovideo.com/c/product/788797-REG/Premier_Mounts_EST200_Dual_Stud_Short_Throw_Projector.html/a

Q: 7. I want to get this LX Dual Side by Side Arm for 2 Eizo 24 monitors.It seems to be good height. I am more worried about extension. I have a diagonal/radius corner desk, with my main monitor in front of the corner (so plenty of room behind monitor). My secondary monitor is angled to the first on a part of work surface which is only 24 deep. I don't want the monitor too far forward on that surface - about 13 from front of desk is good. Seems that is possible and one just has to play with placement of the grommet mount to get the most flexibility. Do you agree?

A: I concur.

Q: 8. Just clarifying that the weight capacity is for Individual monitor weight? (7-20 lbs per monitor) 20-40lb total weight...

A: The Ergotron LX Dual Desk Mount Side-by-Side Arm (Black) BH #ER45245224 will support up to two 27"monitors, each weighing from 7 to 20 pounds.

Q: 9. Can you stack two 27” monitors on top of each other with this stand?

A: Yes you can stack to 27" monitors. Note: Supported Screen Sizes Up to 40" / 102.0 cm Number of Displays Supported 2 Load Capacity 20 lb / 9.1 kg (Per Arm) Mounting-Hole Pattern 75 x 75 to 100 x 100 mm Height Adjustment 13.0" / 33.0 cm Pole Height 22.00" / 55.9 cm https://bit.ly/3kaUuZp

Q: 10. Do you need to have this in addition to the wacom citiq pro 24?

A: If you need to mount it to a VESA compliant mount, yes, it is required.