The AVPro Edge AC-AXION-X Empty Chassis | 48 Char SEO Titleis engineered for high-end systems and can handle any HDMI 2.0 signal, including 4K, HDR, Dolby Vision, and Dolby Atmos. With separately available audio downmixing cards, you have the option of downmixing Dolby Atmos audio into a 2 channel signal that is perfect for whole-home distribution.

This matrix becomes the backbone of your entire installation, delivering 18Gb/s 4K signals from the source to display. The integrator's choices make AXION stand out; selecting between HDMI, HDMI with scaling, or HDBaseT for long video runs let the integrator decide what type of infrastructure will work best for them.

Up to 16 Inputs & 16 Outputs    18Gb/s Bandwidth Support    4K60 4:4:4 Support    Ultimate HDR Support    IR, RS-232, and LAN Control Options

This built-in user interface comes standard on all AXION system switchers; setting up a video distribution system has never been less challenging.

Managing HDMI signals can be challenging, interoperability between sources and displays, changes in signal type coming from different types of content to Hollywood protection with HDCP; each one of these things can cause havoc on your installation. With AVPro Edge's AXION System, the power is back in the hands of the installers.

ICT is a technology developed to ensure 18Gb/s distribution over standard category cable. That means what you put in is what you see on the screen. No need to worry about compression artifacts and banding like you find with other compression methods.

This matrix supports all flavors of HDR in all formats. Including HDR, HDR10, HDR10+, Dolby Vision, HLG, BBC, and NHK. All of them are permitted in up to 4k 60 Hz and up to 12-bit Deep Color. All color space compressions are compatible.

With 29 onboard EDID's, including HDR EDID's, not getting a picture is simply a thing of the past. You can manage the input side of the switch by selecting a preloaded EDID. It also can instantly read an EDID from any connected display and apply it to the desired input, all with the push of a button.

The front panel allows you to do basic configurations, including EDID, Audio, Matrixing, and network. All without connecting a PC or hooking anything up. This additional mode of control is a welcome resource on the job site.

With MCS technology, the power is given to the integrator to choose what types of signals end up on the screen. Scaling is ideal when working with different kinds of TVs and Projectors in the same system.

There is no need to set your source to 2-channel, no matter what kind of audio this matrix switcher receives. Converting audio to 2-channel in the matrix allows you to deliver Dolby Atmos sound to a home theater and 2-channel audio to a bedroom simultaneously.

The user can extract 2-channel PCM audio from each output. NOTE: the analog port only supports 2CH PCM. It features four digital optical TOSLINK outputs with support for 7CH LPCM, Dolby Digital, Dolby Digital +, DTS, DTS Master Audio.

Extracted audio routing options include:

• Bind to output (extracted audio swaps with the video, this is the default mode)
• Bind to input (extracted audio is fixed to the corresponding input by the same number)
• Independent (extracted audio is routed however integrators like and there are commands to allow it to function as a separate matrix)

Related Questions and Answers

Q: 1. I am looking for the product to be used outside to weight down exterior sandwich/billboard signs and tent legs. Would this work?

A: Yes.... Don't know how big your tent is.., I'm sure you would have to buy quite a few but they will definitely work.

Q: 2. Will this unit test the shield on a shielded Cat6?

A: I did not purchase this unit, I bought the lower unit dedicated to analog audio. Your answer may be best answered by the manufacturer. On my balanced audio cables it does not test the shield.

Q: 3. Can this test cables with different connector types on each end? For example XLR on one end and TRS on the other.

A: Yes, you can test cables with different connector types on each end.

Q: 4. Does the tone generator send the tones on all of the connectors, including the RJ45? Can one use an inductive probe to trace wires with the generated tones?

A: Yes it sends a tone on RJ45. The tone is only to signal 1st line as it cycles through the 8 lines of ethernet cable. The additional continuity is tested using the 8 led's

Q: 5. Is there a frame available for the 18 x 48 flag?

A: 539287 is the frame empty

Q: 6. Will this work with Mellanox Connect-X6 / Connect-X5 cars on Windows?

A: The RocketStor 6661A Thunderbolt 3 to PCIe 3.0 Expansion Chassis is only compatible with macOS/OS X systems.

Q: 7. Does the tone generator create a 1Khz tone for audio unity sweep purposes?

A: Yes, as per Kopul; the test tone is -50dB/-10dB/+0dB at 1khz.

Q: 8. I have one of these and the fan is really loud. Is there any way to make it quieter?

A: The fan speed of the HighPoint RocketStor 6661A Thunderbolt 3 to PCIe 3.0 x16 Expansion Chassis is not user adjustable.

Q: 9. Does this tester serves for SDI HD cable? RG-59

A: The CBT-MF cable tester is designed to test XLR, 1/4 , RCA, Speakon, RJ45, RJ11, MIDI and BNC terminated cable. RG-59 coax cable is generally terminated by BNC connectors and continuity in these cables can be tested with this unit.

Q: 10. Does this case have rails for hanging file folders?

A: Unfortunately this case does not have rails for hanging file folders.