The AVPro Edge 8x8 HDMI 4K Matrix Switcheris an 8 x 8 HDMI matrix switch that supports HDMI 2.0(a/b), HDCP 2.3, up to 4K video resolution, and up to 18 Gb/s bandwidth. This switch allows any source (Blu-ray, UHD Blu-ray, satellite receiver, game consoles, PCs, etc.) to show on any connected displays. This matrix equalizes and amplifies the output to ensure the HDMI signal transmits through long HDMI cables without losing quality.

Onboard audio delay, so integrators can manage lip-sync issues before they become a problem. Video signal management is also possible with built-in scalers. So, if the installation has a couple of older displays, integrators don't need to forfeit 4K signals to pass the signal to all of the displays. In addition to scalers, this matrix supports complete EDID management, allowing maximum flexibility with today's broad mixture of sources and displays.

HDMI 2.0(a/b), 18Gb/s Bandwidth Support    4K to 1080p Down Scalers on Each Output    4K60 4:4:4 Support    Full HDR Support (HDR 10 & 12 Bit)

Managing HDMI signals can be challenging, from interoperability between sources and displays, changes in signal type coming from different types of content, to Hollywood protection with HDCP; each one of these things can cause havoc on the installation. With AVPro Edge's User Interface, we put the power back in the hands of the installers. Integrators can create their custom EDID strings to perfect the signal coming from the source or scale an image to work with a legacy display, all from an easily accessible and navigatable interface.

Convert high-bandwidth signals between 9-18 Gb/s to be used with HDBaseT transmitters. The conversion uses a proprietary algorithm that impacts the original image a little as possible, so integrators can transmit HDR and high-bandwidth signals over long-distance transmission devices like HDBaseT extenders or for use on a display that does not support 18 Gb/s. Best of all, integrators manage this setting on a per output basis, so they have complete control over which individual runs are down-clocked.

This technology is managed on each output. Scaling will allow integrators to downscale 4K sources on outputs going to displays that may not support 4K. Additionally, this matrix switcher can scale chroma subsampling from 4:4:4 down to 4:2:0, ensuring compatibility with legacy devices. Other matrix switchers force a signal to work by "dumbing down" the entire system even if there is only one old 1080p display.

With 29 onboard EDID's, including HDR EDID's, not getting a picture is simply a thing of the past. Integrators can manage the input side of the switch by selecting a preloaded EDID. We also can instantly read an EDID from any connected display and apply it to the desired input, all with the push of a button.

• The user can extract 2 Channel PCM audio from each output. NOTE: the Analog Port only supports 2CH PCM for down-mixing, check out AC-AVDM-AUHD or our AXION line of matrix switchers.
• It features four digital optical TOSLINK outputs with support for 7CH LPCM, Dolby Digital, Dolby Digital +, DTS, DTS Master Audio.
• Extracted audio routing options include
• Bind to output (extracted audio swaps with the video, this is the default mode)
• Bind to input (extracted audio is fixed to the corresponding input by the same number)
• Independent (extracted audio is routed however integrators like and there are commands to allow it to function as a separate matrix)

With the AC-MX-88, integrators can manage audio delay per output on the balanced or digital outputs. Delay audio up to 630ms, so lip-sync problems vanish. Audio delay can be controlled directly from the front panel for ease of use and a simple setup with the push of a button.

The unit features an internal test pattern generator that integrators can use to verify that the infrastructure after the matrix is intact. Displaying a test pattern on each output can save hours of painful troubleshooting and allow integrators to identify issues before becoming problems.

Related Questions and Answers

Q: 1. Is it working with sony bravia 48 inch tv?

A: Yes

Q: 2. Do the EDID switches affect both ports? I need to pass 4K60Hz with Dolby Video to Output 1, and plain 4K60 to port 2.

A: The Ocean Matrix 8K60 HDMI 2x1x2 Splitter & Switcher with Dual Inputs' EDID switches will apply to both outputs, so you will not be able to vary the audio output between the two outputs.

Q: 3. How seamless is the switching? Is there any video "tearing"?

A: IOGEAR says : Thank you for choosing IOGEAR. Video tearing is present however it is minimal . This is only present when switching ports. Once again, thank you for choosing IOGEAR.

Q: 4. Any issues using it to connect BD player, Nintendo switch to a 8 year old plasma TV?

A: There should not be any issues, just as long as the TV has HDMI inputs.

Q: 5. does the signal hold on an inactive port? meaning if I have a computer connected to input 1, and I switch to input 2, does the computer on input 1 think that it has lost the connection?

A: We are not sure of the process but we know that you do not lose the signal and that you can switch back and forth at any time.

Q: 6. Can it be set to always switch manually? I don't want it to switch automatically when a new source is connected. But I don't want to have to set this option every time I use it... How does it work?

A: hi from remote control can not change.i now if you off source 1 it will go to souce 2 auto

Q: 7. Can I connect Google Chromecast (hdmi dongle) to this device with the intent of sending the hdmi output to a projector AND then going toslink/digital audio out to an audio receiver?

A: The quick answer is yes.... However if your only use is to bring in 1 HDMI source and go to toslink then there are other products that will also work, if you are bringing in multiple sources and sending them to your projector and audio system then this is a great box...

Q: 8. This Switch support 3D?

A: If the 3D signal is in one HDMI connection, we do not see why not. If you have one 3D signal but in multiple connections, we would say no.

Q: 9. Is the tearing a quick dip to black, blue or distortion effect on black?

A: IOGEAR says : Thank you for choosing IOGEAR and we apologize for the inconvenience. To better service you and understand your set up, please feel to contact our customer support at 1-866-946-4327 or email us: support@iogear.com. Once again, thank you for choosing IOGEAR.

Q: 10. Can this unit be used to switch between video cameras that support HDMI? I want to use it to switch between a GoPro and a Nikon D850 DSLR.

A: Yes, this can be used to switch between most sources that have an HDMI output. However this is a presentation switcher, not a production switcher. It will glitch and lose the signal when going between the inputs. Something like the ATEM Mini would be a far better option for switching between cameras. https://bhpho.to/2TCZNF8