This AVPro Edge MXNet 1G Wall Plate Encoder | SEO Titleis an AV over IP encoder device that fits into any standard dual-gang mud ring. Connect this MXNet wall plate to any HDMI source and it will encode the audio/video signal into a multicast data format that can be routed to any Decoder endpoint within the project/installation. This device connects directly via category cable (CAT 5e or better) to any MXNet switch. The AC-MXNET-1G-EWP is a part of the MXNet family of AV-over-IP products from AVPro Edge.

The AC-MXNET-1G-EWP will encode a full 4K 4:4:4 60 Hz HDMI video signal along with audio, control, power, and HDR metadata. These signals are passed to single or multiple decoder endpoints via multicast routing through an MXNet or multicast compatible L3 managed network switch. It does all this with next to zero latency. MXNet Encoders encode audio/video/control signals into IP packets using an optimized JPEG2000 codec at a flexible data rate (200 Mb/s for 1080p content, 300 Mb/s for 4K30 content, 850 Mb/s at peak).

1G Maximum Data Rate    Bandwidth Management via MXNet MENTOR    Supports Cat 5e or Better    Fits in Standard Dual-Gang Mud Rings

JPEG 2000 is the obvious and essential video encoding choice when picture quality is critical. JPEG 2000 supports progressive decoding and delivers both lossy and lossless compression within a code stream. JPEG 2000 supports genlock, so that the frames of a video source are synced to all decoders, resulting in tear-free video walls. JPEG 2000 enables the handling of color-space information, 10-bit color, and it supports interactivity in networked applications.

Our integrators pride themselves on their work, so don't let a small blue, green, red, or yellow light ruin your perfectly engineered viewing room. When you install an encoder in a discreet location, you have the option to turn off all the lights on the device—including network link lights—as well as the Data Window OLED light. This allows you to install the encoder, and once you know everything is working, eliminate any light outputted from the device. This way, the end-user will never even know it's there.

Both RS-232 and IR signals can be direct routed through the AC-MXNET-1G-E encoder. When you route these signals through a network switch, you can specify either single or multiple decoders to receive these control signals.

Each encoder unit has a USB-B host connection. This allows you to connect and route any connected USB signals to a decoder device. Use the MXNet mentor software to specify the host encoder and the upstream USB device connected to the selected decoder.

Related Questions and Answers

Q: 1. Does the 4G or 5G modem come in the box or are they purchased separately?

A: The Kiloview P3 5G Bonding Video Encoder does not come with modems, and you will need to add sims for the modem cards. You can add either the 4G modem or 5G modem cards, or any combination of the two. Up to four modems can be added. Kiloview 5G Modem for P3 5G Bonding Video Encoder BH #KI5GMODEM Kiloview 4G Modem for P3 5G Bonding Video Encoder BH #KI4GMODEM

Q: 2. Does this unit have a 1/4 20 for tripod mounting?

A: The BirdDog Mini HDMI to NDI Encoder/Decoder (B&H# BIBDMINIHDMI) does not have a 1/4"-20 female thread in particular. Rather, to mount this product using a 1/4"-20 thread, just add the separate item called the BirdDog Mini Camera Mount (B&H# BIBDMINICM). See below: https://bhpho.to/3ZJMaUy

Q: 3. Does this device require an annual support contract?

A: The Videon EdgeCaster EZ Encoder (Single Output) provides a one-year warranty on the product from the manufacturer. Still, for additional support, advanced replacement, hardware upgrade, and exclusive early access to beta features and apps, the VCare and VCARE+ should be considered. To see further information, see the link below: https://bit.ly/3XPKIia

Q: 4. Does the unit itself encode and transmit SRT or does that happen on the server side after it has been received?

A: The Kiloview P3 5G Bonding Video Encoder encodes and transmits SRT directly from the device. The encoder will accomplish it over the network using the SRT protocol.

Q: 5. How much is the load capacity?

A: Unfortunately, Avenger does not list a load capacity for this item.

Q: 6. If I am using the HDMI input to transmit NDI, can the output be used as a pass-through? Or does only one HDMI port work at a time?

A: Yes you can. According to Bird Dog the output can be used as a pass-thru.

Q: 7. How much storage space does this device have?

A: The Videon EdgeCaster 4K Ultralow-Latency Encoder has no storage whatsoever. It is an encoder, not a drive.

Q: 8. Can this support the Nova P600c weight? I want to mount the P600c to my wall or ceiling but not sure if it's too heavy.

A: The type of wall and how you anchor the Avenger F300 Junior Wall Plate (Chrome-plated) BH #AVF300 will determine the load it can support.

Q: 9. Can you stream using RTMP and NDI as well as record at the same time?

A: The Magewell Ultra Encode HDMI Plus Universal 4K Encoder can record and stream simultaneously. It can also stream in both RTMP and NDI as long as NDI|HX2 is used. Please note that only a max of 2 simultaneous sessions of NDI|HX2 are possible. NDI|HX3 cannot be streamed at the same time as other streaming protocols.

Q: 10. Does the USW-PRO-MAX-48 (not the POE version) have any fans (is it fanless)?

A: The Ubiquiti Networks Pro Max 48-Port 2.5G / 1G Managed Network Switch (non-PoE) is fanless.