With this Marshall Electronics 1x8 3G/HD/SD-SDI Reclocking DAfrom Marshall, you can take a single SDI signal and send it out to up to eight devices simultaneously. SD, HD, and 3G-SDI standards are supported, and the input standard is automatically detected. Each SDI output is independently reclocked and buffered, ensuring signal fidelity and passing all ancillary data over long cable runs. Easy-to-read LED status indicator lights denote the converter's current status.

ript>

3G/HD/SD SDI Distribution    8 x Discrete Buffered & Reclocked Output    LED Indicator of Input Lock & Rate    Passes All Ancillary Data    Automatic Input Cable Equalization

3G/HD/SD triple-rate distribution

Eight separately buffered and reclocked outputs

Supported SDI format:

• 3G-SDI (SMPTE 424M, 425M level A, B up to 2.97 Gb/s)
• HD-SDI (SMPTE 292M, 296M up to 1.485 Gb/s)
• SD-SDI (SMPTE 259M, up to 270 Mb/s)

Cable equalization (Belden 1694A) and signal retiming

Video bandwidth: 2.97 Gb/s and 2.97/1.001 Gb/s

Automatic detection of 3G/HD/SD-SDI signals

Dual-color LED indication of input lock and rate

Passes all ancillary data

Provides automatic cable equalization:

• 3G: >400'
• HD: >667'
• SD: >1000'

Reclocks SDI signals for cascading and thus longer transmission

Interlocked power supply for better fixedness

Related Questions and Answers

Q: 1. Can you reccomend a proper lemo cable to use with BH #TIGAPPKV ? Preferrable short (1-3 feet max). Thanks. Being able to account for correct polarity is a concern.

A: Freakshow HD 4K 12G-SDI MSX2-L Microsplit Reclocking DA with Locking LEMO Power Connector comes with the correct Lemo power cable. If you need a replacement, please contact the manufacturer. info@freakshowhd.com

Q: 2. Description says SDI and HDMI output but the images only show a labelled SDI port.. where's it hiding?

A: The image of the Marshall Electronics CV348 Compact 3G-SDI/HDMI POV Camera is not the version with both outputs. Rest assured, this model does have both outputs.

Q: 3. What cable would I use to place the camera 25-50 feet from the controller? The PTC-200 controller only had a short cable and I do not have the ability to build one of my own.

A: B&H # TEVMDX850 is a TecNec Visca Camera Control Cable 8-Pin DIN Male to Male 50 Feet that you can use. https://bhpho.to/2Jgf7nT

Q: 4. Can the sdi and hdmi output work simoultaneously?

A: Yes, the Marshall Electronics CV508 Micro HDMI/3G-SDI POV Camera can output simultaneously to both SDI and HDMI.

Q: 5. What is the power input range?

A: Power input range varies from 5 to 36 VDC.

Q: 6. Can more than one booster be used on the same cable? I want to see if I can send an HD signal over 400Ft

A: I can't answer that but I can tell you that I could not get ours to work right until I moved it from the source to the end termination point. A midpoint insertion did not work either. I suspect it has something to do with standing waves.

Q: 7. Does it comes with the Standard Freakshow Power Connector or do I have to buy it separately?

A: The Freakshow HD 4K 12G-SDI MSX2-O Microsplit comes included with an AC adapter for wall power.

Q: 8. This might be an oblivious question, but does this splitter introduce any additional latency to the signal?

A: No, there is no latency from using the Freakshow HD 4K 12G-SDI MSX2-L Microsplit Reclocking DA with Locking LEMO Power Connector in your pipeline.

Q: 9. Do you still need to follow SDI protocol when powering on & off your camera when using this?

A: Regarding the Freakshow HD 4K 12G-SDI MSX2-O Microsplit Reclocking DA with Standard Freakshow Power Connector, the SDI protocol should always be used when connecting an SDI cable or device to a camera.

Q: 10. Does this camera come shipped with the lens? Also, whats the zoom capacity of this camera?

A: It does not. A lens is not included with this camera. The Marshall Electronics M12-Mount 2.8-12mm IR Varifocal Lens, B&H # MACV28123MP, is a great option for a zoom lens. https://bhpho.to/2JiXJNh