Heden 2-Pin To 2-Pin/6-Pin Lemo Cable For Cinetape, Vlc-3, Ymer-3

Heden 2-pin To 2-pin/6-pin Lemo Cable For Cinetape, Vlc-3, Ymer-3

Product Code: eq110099
Availability: In Stock

$675.00 $938.25

Qty

19 reviews Write a review

Description
Reviews (19)

This 27.6" HEDEN 2-Pin to 2-Pin/6-Pin LEMO Cable for CineTape, VLC-3, YMER-3from HEDEN 2-Pin to 2-Pin/6-Pin LEMO Cable for CineTape, VLC-3, YMER-3connects your CineTape control to your VLC-3 receiver via a 2-pin LEMO-type to 6-pin LEMO-type connection via the CineTape remote port and VLC-3 run/stop port. An additional 2-pin LEMO-type connector can be inserted into the YMER-3 hand unit to integrate the CineTape's distance data into its OLED display. Operating your cine camera wireless controls becomes that much more intuitive thanks to this transfer of data.

Link CineTape to VLC-3 Receiver Integrate Distance Data into Hand Unit Two 2-Pin LEMO-Type Connectors One 6-Pin LEMO-Type Connector Connects Run/Stop and Remote Ports 27.6" Cable Length

Parameters
Connectors	1 x 2-Pin LEMO-Type Male (VLC-3 R/S) 1 x 2-Pin LEMO-Type Female (R/S Out) 1 x 6-Pin LEMO-Type Male (CineTape)
Cable Length	27.6" / 70 cm
Weight	NSBM

CineTape control

HEDEN VLC-3 receiver

HEDEN YMER-3 hand unit with most recent firmware update

Related Questions and Answers

Q: 1. Will this work to power ronin rs2 base plate?

A: Yes, this cable can power the DJI RS2 Baseplate.

Q: 2. Will the lemo work with 2-pin input on Teradek?

A: We recommend staying within Teradek branded lemo adapters to avoid polarity issues.

Q: 3. Is it the same female lemo that is used to use to power Red Komodo? As I want to use the smallrig battery plate 12v output to power red komodo with this cable.

A: This is a male LEMO cable and will not fit into the RED Komodo male LEMO port.

Q: 4. Does this cable work with the Canon HV20? I purchased a firewire cable and the 4 pin was a little to big to fit the Canon HV20. I want to make sure this one fits before I buy it. Thank you

A: Yes, this will fit the HV20.

Q: 5. Will this cable work to power the SmallHD Cine 5 screen when connected to a V-mount battery?

A: No, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable (15.74") will not but the Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable (21.75") will power the SmallHD Cine 5.

Q: 6. Will this power a RED Komodo from a V-mount Battery?

A: No, the Tilta 2-Pin LEMO to 5.5/2.5mm DC Barrel Male Cable (15.74") is not compatible with the RED Komodo.

Q: 7. Does this battery power the camera and the transmitter at the same time?

A: Yes the Panasonic VW-VGB6 Battery & 10" Barrel Adapter to 2-Pin Lemo Cable from Teradek will power a compatible camera and Teradek transmitter that has a 2-pin lemo connector.

Q: 8. Would this work with the 12v output on the small rig vmount battery adapter plate?

A: The barrel connector for 12v on the Smallrig 3204 Vmount model is 5.5/2.5mm for 12v.. Yes, It should work.

Q: 9. will four pin fit into dvi port of Sony handycam TRV350?

A: No, the Firewire 4 pin port would not fit into a dvi port. But the Sony handycam TRV350 would not have a DVI port, it would have the Firewire port

Q: 10. Does this connect to the Atomos Shinobi 7” ?

A: Yes, the Tilta 2-Pin LEMO to 5.5/2.1mm DC Barrel Male Cable (21.75") would work as a power cable for the Atomos Shinobi 7" 4K HDMI/SDI Monitor.

Christian	29/09/2024
[NSBM] As with many things Tilta makes, a decent quality and a competitive price. These cables are far more from other brands, so I use this to power smallHD monitors which works well. I wish the cable wasn't as long on the connection point - they protrude quite a lot, but they have worked well so far. 5

William	28/08/2024
[27.6" / 70 cm] Every product I've ever purchased from Tentacle Sync is of outstanding quality, and this cable is no exception. I still use a Red One, and this is the cable you need to connect a TS timecode generator to the camera's timecode input. 5

Emanuele	27/08/2024
[27.6" / 70 cm] Perfect solution for my Komodo set up. 5

Kong	17/08/2024
[27.6" / 70 cm] Tentacle Sync cables are always great and as the headline says, this is the cable for use with the RED Mysterium X camera. If that's the camera you're dealing with, don't use the cable that says it's for RED, that connector looks the same but is smaller. I'm sure it's for the newer RED camera systems. 5

Tony	07/08/2024
[27.6" / 70 cm] Great 5

Ryan	21/07/2024
[NSBM] It seems pretty good. No complaints. Its a well built cable 5

Bob	17/07/2024
[NSBM] If you need a cable for a Red camera this is the one. There are different Red camera's so make sure you know what pin configuration you need 5

Billy N.	15/07/2024
[NSBM] Bought this for my Steadicam Flyer to mount RED batteries at the bottom of the sled and power everything up top. Does the job at a reasonable price. 5

Yuki	09/07/2024
[NSBM] If you have mini LF or Alexa 35, and want to use Tilta Nucleus M, this is a perfect cable for you. It connects to the 3pin port and power the motor. On top of that, it adds the ability to use run stop. 5

Eric	02/07/2024
[27.6" / 70 cm] After testing several different cables, I found this cable - the Tentacle Sync Tentacle to 5-Pin LEMO Cable- is the correct cable to send timecode to the ARRI Alexa 35. 5