Transmit and receive lossless HD video from up to 5000' line of sight with the Teradek Bolt 6 LT MAX Wireless Transmitter Receiver Kitfrom Teradek. The kit includes a Bolt 6 wireless transmitter and Bolt 6 receiver featuring bright OLED displays and able to wirelessly receive up to UHD 4K30 HDR video with 10-bit 4:2:2 HDR support, and this new line supports the 6 GHz wireless band, which is now freely available. The transmitter inputs up to 4K video over HDMI or up to 1080p30 video via 3G-SDI, and the receiver outputs up to 4K30 video via HDMI and up to 1080p60 3G-SDI.

The transmitter sends up to 4K30 video to the Bolt 4K LT MAX receiver, and it can also simultaneously transmit to up to six receivers. The system features improved metadata, range, and compatibility over its predecessors, and it supports HDMI/SDI cross conversion. Though the transmitter can transmit visually lossless video to any Bolt 4K series receiver with zero delay using the 5 GHz band, it requires a Bolt 6 device to transmit over the 6 GHz band. A carry case is included to store and transport the kit.

Supports New 6 GHz Frequency Band    Bolt 6 LT MAX Transmitter & Receiver    Transmits up to 5000' Line of Sight    Integrated Flexible H Antennas    Supports up to 4K30 Resolution Input    HDMI/3G-SDI Inputs & Outputs    10-Bit 4:2:2 Support, No Delay    Also Compatible with Bolt 4K Series    AES-256 Encryption, 7 Antennas    Bluetooth Mobile App, Spectrum Analyzer

Compatible with Bolt 6 series devices using the newly available 6 GHz frequency band

Cross-compatible with all Bolt 4K series devices over the 5 GHz signal spectrum

Transmits to an unlimited number of receivers in broadcast mode

SDI Eye Pattern Tool to check SDI cable integrity

Improved "long-range" mode

Input up to 4K via HDMI video; input/output 1080p via 3G-SDI, and transmit up to 4K30 video

Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut

HDR workflow support with HDR-10, PQ, and HLG standards

Smaller and lighter chassis design than other Bolt transmitters

Transmit metadata, timecode, and stop/start triggers over a wireless connection

Simultaneously transmit to up to six Bolt 6 or Bolt 4K series receivers

AES-256 encryption support

Wireless iOS/Android app via Bluetooth features a spectrum analyzer and remote configuration

Related Questions and Answers

Q: 1. Can I use more than one tx / rx pair in the same environment?

A: It should theoretically be possible to use 6 Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kits in a single location if you are all using fixed frequencies and there is minimal external interference in the area. The spacing of the equipment will also be incredibly important. With the Bolt 6 you'll want to have at least 10 feet between the transmitter and the receiver, and between other sets. If more receivers are used in a set this will impact the communication even more so. The Bolts operate in the unlicensed 5 GHz spectrum which can be use by other devices like WiFi routers, other wireless transmitting systems, etc. Here is an article that may be helpful: https://support.cs.inc/s/article/Bolt-4k-Best-Practices-for-Interference

Q: 2. If I connected the transmitter to a video switch (e.g., ATEM Mini Extreme's HDMI-out port) could I connect the receiver to a projector (Epson LS500) and play compatible videos with sound?

A: Yes, Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kit would be able to provide a latency free wireless HDMI connection between the Black Magic Atem Mini Extreme and an HDMI onput projector like the Epson LS500.

Q: 3. Is there a PTap port on the Anton Bauer plate to power other accessories?

A: Please note that the Teradek Bolt 6 LT HDMI 750 Wireless Receiver BH #TE102267 does not come with a V-Mount plate. The following Teradek Blot 6 comes with a V-Mount battery plate and one DTap connector on the plate. Teradek Bolt 6 LT HDMI Wireless Receiver (V-Mount) BH #TE102267V

Q: 4. does the it lower the image quality when it being transmitted?

A: No, the image quality will not be affected when using the Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit for wireless transmission.

Q: 5. If I buy the kit without a V mount plate where can I get it later if I want to? I can't find the same one they use.

A: The Wooden Camera Dual Battery Plate Cradle for Teradek Bolt LT Transmitter (V-Mount) is the respective V-Mount plate for the Teradek Bolt 6 LT HDMI 750 Wireless Receiver.

Q: 6. Can the Bolt 6 Receiver HDMI receives signal from from a Bolt 6 SDI/HDMI version?

A: The Teradek Bolt 6 LT HDMI 750 Wireless Receiver can receive the signal of any bolt 4K series transmitter, including the transmitters that SDI/HDMI inputs.

Q: 7. If the Tx is fed signal via HDMI, will the local BNC loop thru / output transcode that signal lien the older 500 units did?

A: Yes, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Transmitter supports HDMI cross conversion. This would allow the HDMI input to output through the 3G-SDI. The Teradek Bolt 6 also would downscale 4k signals from HDMI to HD when outputting via the 3D-SDI.

Q: 8. Can the receiver accept more than one Tx signal & output those multiple signals at the same time to one monitor?

A: No, the Teradek Bolt 6 LT 750 transmitter (TX) can only send one signal to up to six Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Receivers (RX).

Q: 9. Can someone at B&H test to see if this works with the Sony A7s iii? A review said that there is an issue.

A: Yes, the Teradek Bolt 6 LT 750 3G-SDI/HDMI will work with the Sony A7SIII.

Q: 10. Can you use HDMI out and SDI in (or the opposite) at the same time?

A: When using the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) the only output for HDMI is on the receiver. Although the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) has bidirectional signal, it is limited.