Transmit lossless HD video up to 750' with the Teradek Bolt 6 XT 750 Wireless Transmitter 12G-SDI/HDMIfrom Teradek. With a smaller and lighter form factor than the Bolt 4K model, this transmitter can input up to DCI 4K60 video over HDMI or 12G-SDI with 10-bit 4:2:2 HDR support, and this new line supports the 6 GHz wireless band, which is now freely available. It also features a 50% quieter operation with its redesigned cooling system. The transmitter unit provides a powerful signal that can travel up to a 750' line of sight. It features a bright OLED display and 12G-SDI loop output, can be powered using its Gold mount battery plate, and supports camera control with optional firmware via its 5-pin USB output.

The transmitter supports the transmission of up to DCI 4K60 video to up to six receivers and features improved metadata, range, and compatibility over its predecessors. Built-in AES-256 encryption protects your video from prying eyes, while noise rejection and improved long-range mode keep your video clean no matter how many devices are using the wireless spectrum. The Bolt XT system also supports the transmission of timecode and start/stop triggers from the camera.

Though it can transmit visually lossless video to any Bolt 4K series receiver with zero delay using the 5 GHz band, it requires a Bolt 6 device to transmit over the 6 GHz band. The transmitter also supports a desktop Bolt Manager software application or the Bolt app for iOS or Android that easily connects via Bluetooth, both providing a spectrum analyzer, channel selection tools, and remote configuration. There are 1/4"-20 and M3 mounting threads to mount your transmitter on a variety of cameras, cages, or rigs.

Supports New 6 GHz Frequency Band    Transmit Video up to 750' Line of Sight    12G-SDI and HDMI Input, 12G-SDI Output    Gold Mount Battery Plate    Smaller, Lighter, 50% Quieter    5-Pin USB Output for Camera Control    Transmit to up to 6 RXs    Compatible with All Bolt 4K 5G Devices    AES-256 Encryption, 4 x Antennas    Bluetooth Mobile App, Spectrum Analyzer

Compatible with Bolt 6 series devices using the newly available 6 GHz frequency band

Smaller, lighter, and 50% quieter than previous models

Cross-compatible with all Bolt 4K, Bolt 4K LT, and Bolt 4K Monitor Module series devices over the 5 GHz signal spectrum

Input and output 12G-SDI and HDMI video and transmit up to 4K60 video; 12G-SDI loop output

SDI Eye Pattern Tool to check SDI cable integrity

Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut

Powered via DC input or the Gold mount battery plate

Improved "long-range" mode

Transmit to up to six Bolt 4K or Bolt 6 series receivers

AES-256 encryption support

Wireless iOS/Android app via Bluetooth features a spectrum analyzer and remote configuration

Power via 2-pin DC input or included Gold mount battery plate

Related Questions and Answers

Q: 1. Is there a PTap port on the Anton Bauer plate to power other accessories?

A: Please note that the Teradek Bolt 6 LT HDMI 750 Wireless Receiver BH #TE102267 does not come with a V-Mount plate. The following Teradek Blot 6 comes with a V-Mount battery plate and one DTap connector on the plate. Teradek Bolt 6 LT HDMI Wireless Receiver (V-Mount) BH #TE102267V

Q: 2. Will this product decrease my video quality when it does the transmutation, like will I notice any form of lower quality video being transmitted, because I'm planning to use it for live streaming?

A: The Bolt 6 XT supports transmitting video and audio in 10-Bit 4:2:2 with no Delay. It sends a very high quality broadcast level signal. It also has HDR support.

Q: 3. Can the Bolt 6 Receiver HDMI receives signal from from a Bolt 6 SDI/HDMI version?

A: The Teradek Bolt 6 LT HDMI 750 Wireless Receiver can receive the signal of any bolt 4K series transmitter, including the transmitters that SDI/HDMI inputs.

Q: 4. I see the Ace750 comes with one power supply for the receiver. Can I purchase a 2nd power supply to power the transmitter?

A: Yes, you can use an additional Teradek NIBL 056 AC Adapter (18W, 6' Cable), B&H # TE110058, to power the transmitter in the Teradek Ace 750 HDMI Wireless Video Transmitter and Receiver Set.

Q: 5. does it compress the video when it being transmitted, or in other word does it lower the video quality?

A: There is slight compression during transmission with the 4K capable Teradek Bolt 6 XT 1500 12G-SDI/HDMI Wireless Transmitter/Receiver Kit, but all information is delivered through the receiver to provide a visually lossless image.

Q: 6. Can the transmitter take in and pass through 24v from a core SWX Helix Max battery? Or does it only accept 12v?

A: No, the Teradek Bolt 6K XT Max cannot take in and pass through 24V from a Core SWX Helix Max Battery. The Teradek Bolt 6K XT Max accepts 6-28V at up to 3A.

Q: 7. Will this system support two receivers to one transmitter?

A: Yes, When using the Teradek Bolt 6 XT 750 you can transmit to up to six Bolt 4K or Bolt 6 series receivers. It is only one Transmitter (input) to up to six Receivers (Output).

Q: 8. Can you receive a signal from a Bolt6 750LT transmitter?

A: Yes, you can use the Teradek Ace 750 HDMI Wireless Video Receiver with the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Transmitter.

Q: 9. Does this come with that small array pictured in "in the box"?

A: The Teradek Bolt 6 LT 1500 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) does come with an included Antenna Array.

Q: 10. The limit is 4K30P, If I for example shot 4K60P my camera would still record that but the Teradek would only send a 4K30P feed?

A: The Teradek Ace 750 HDMI Wireless Video Transmitter and Receiver Set the camera's recorded 4K60P is encoded to 4K30P for transmission.