You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Teradek Bolt 6 Xt 750 Wireless Receiver 12g-sdi Hdmi V-mount

Teradek Bolt 6 Xt 750 Wireless Receiver 12g-sdi Hdmi V-mount
  • Product Code: eq110572
  • Availability: In Stock

$11,070.00 $16,715.70

Receive lossless HD video from up to 750' away along the line of sight with the Teradek Bolt 6 XT 750 Wireless Receiver 12G-SDI HDMI V-Mountfrom Teradek. The unit can wirelessly receive up to DCI 4K60 video with 10-bit HDR support, and it features a bright OLED display and both HDMI and 12G-SDI outputs. This new line supports the 6 GHz wireless band, which is now freely available. It also supports camera control with optional firmware via its 5-pin USB output. The unit comes with a V-mount battery plate, so it can be powered using an optional high-capacity V-mount battery.

The receiver supports transmissions of up to DCI 4K60 video from any Bolt 6 or Bolt 4K series transmitter, which can simultaneously transmit to up to six receivers and has an improved long-range mode. It features improved metadata, range, and compatibility over its predecessors. The built-in AES-256 encryption and RSA 1024 key pairing protect your video from prying eyes, while noise rejection keeps your video clean no matter how many devices are using the wireless spectrum. The Bolt 6 XT system also supports the transmission of timecode and start/stop triggers.

Though it can receive visually lossless video from any Bolt 4K series transmitter with zero delay using the 5 GHz band, it requires a Bolt 6 device to transmit over the 6 GHz band. The transmitter also supports a desktop Bolt Manager software application or the Bolt app for iOS or Android that easily connects via Bluetooth, both providing a spectrum analyzer, channel selection tools, and remote configuration. There are 1/4"-20 and 3/8"-16 mounting threads to mount your receiver on a variety of monitors or rigs.

Supports New 6 GHz Frequency Band    Receive Video from up to 750' Away LoS    12G-SDI & HDMI Outputs, Zero Delay    V-Mount Battery Plate    Smaller, Lighter, 50% Quieter    5-Pin USB Output for Camera Control    Receive DCI 4K60 Video, 10-Bit 4:2:2    Compatible with All Bolt 4K Transmitters    AES-256 Encryption, 5 Antennas    Bluetooth Mobile App, Spectrum Analyzer

Key Specs
Video I/O1x HDMI 2.0 Output
1x BNC (12G-SDI) Output
Embedded AudioHDMI: 2-Channel
SDI: 2-Channel
Latency< 0.01 ms
Video FormatHDMI (10-Bit 4:4:4/4:2:2 RGB, YCC)
DCI 4K: 60/59.94/50/30/29.97/25/24/23.98
UHD 4K: 60/59.94/50/30/29.97/25/24/23.98
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576p: 50
480p: 60/59.94
576i: 60
480i: 59.94
SDI (4:4:4/4:2:2 RGB, YCC)
DCI 4K: 60/59.94/50/30/29.97/25/24/23.98
UHD 4K: 60/59.94/50/30/29.97/25/24/23.98
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576p: 50
576i: 50
480p: 60/59.94
480i: 59.94
Battery Type1x V-Mount
Power Consumption18 W
Mounting1x 1/4"-20 Female
1x 3/8"-16 Female
Inputs / Outputs
Antenna I/O5x RP-SMA Female
Video I/O1x HDMI 2.0 Output
1x BNC (12G-SDI) Output
Embedded AudioHDMI: 2-Channel
SDI: 2-Channel
Audio I/ONo
Power I/O1x LEMO 2-Pin (28 VDC) Input
Other I/O1x USB-C Input
1x LEMO 5-Pin 2.0 Output
EncryptionYes, 256-Bit AES
Wireless
Wireless Range750' / 228.6 m (Line-of-Sight)
Channel Bandwidth40 MHz, 20 MHz
Frequency RangeNon-DFS Frequencies
US: 5.94 to 6.42 GHz
US: 5.19 to 5.23 GHz
US: 5.75 to 5.79 GHz
DFS Frequencies
US: 5.27 to 5.67 GHz
Latency< 0.01 ms
RF Power21 dBm
Wi-FiNo
BluetoothYes
Mobile App CompatibleNo
Cellular SupportNo
Format Support
Video FormatHDMI (10-Bit 4:4:4/4:2:2 RGB, YCC)
DCI 4K: 60/59.94/50/30/29.97/25/24/23.98
UHD 4K: 60/59.94/50/30/29.97/25/24/23.98
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080PsF: 30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576p: 50
480p: 60/59.94
576i: 60
480i: 59.94
SDI (4:4:4/4:2:2 RGB, YCC)
DCI 4K: 60/59.94/50/30/29.97/25/24/23.98
UHD 4K: 60/59.94/50/30/29.97/25/24/23.98
1080p: 60/59.94/50/30/29.97/25/24/23.98
1080i: 60/59.94/50
720p: 60/59.94/50
576p: 50
576i: 50
480p: 60/59.94
480i: 59.94
Audio Format2-Channel 24-Bit 48 kHz
Timecode SupportYes
Power
Input Power6 to 28 VDC
Battery Type1x V-Mount
Power Consumption18 W
Mounting
Mounting1x 1/4"-20 Female
1x 3/8"-16 Female
General
Environmental ResistanceNo
Operating Conditions32 to 72°F / 0 to 40°C 
Material of ConstructionAluminum, Polycarbonate
Dimensions5.5 x 4.4 x 1.1" / 139 x 112 x 27 mm (Excluding Battery Plate)
Weight15.17 oz / 430.00 g, Excluding Battery Plate
Packaging Info
Package Weight4.24 lb
Box Dimensions (LxWxH)16.5 x 9.1 x 3.6"

Compatible with Bolt 6 series devices using the newly available 6 GHz frequency band

Smaller, lighter, and 50% quieter than previous models

Wirelessly receive up to DCI 4K60 video and output 4K via HDMI or 12G-SDI outputs

Camera control with optional firmware via its 5-pin USB output

SDI Eye Pattern Tool to check SDI cable integrity

Cross-compatible with all Bolt 4K series devices over the 5 GHz signal spectrum

Supports Rec 2020 HDR in 10-bit 4:2:2 color gamut

The receiver features five antennas

Improved "long-range" mode

AES-256 encryption and RSA 1024 key pairing support

Wireless iOS/Android app via Bluetooth features a spectrum analyzer and remote configuration

Power via 2-pin DC input or included V-mount battery plate

Related Questions and Answers

Q: 1. Does Transmitters have a vmount plate? or is this only for the receivers?

A: While the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) only has a V-mount plate for the receiver, you could add the Teradek Single-Battery Plate for Bolt (Female, V-Mount), B&H # TE110854, to the transmitter.

Q: 2. Can I use more than one tx / rx pair in the same environment?

A: It should theoretically be possible to use 6 Teradek Bolt 6 LT HDMI 750 Transmitter/Receiver Kits in a single location if you are all using fixed frequencies and there is minimal external interference in the area. The spacing of the equipment will also be incredibly important. With the Bolt 6 you'll want to have at least 10 feet between the transmitter and the receiver, and between other sets. If more receivers are used in a set this will impact the communication even more so. The Bolts operate in the unlicensed 5 GHz spectrum which can be use by other devices like WiFi routers, other wireless transmitting systems, etc. Here is an article that may be helpful: https://support.cs.inc/s/article/Bolt-4k-Best-Practices-for-Interference

Q: 3. If the Tx is fed signal via HDMI, will the local BNC loop thru / output transcode that signal lien the older 500 units did?

A: Yes, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless Transmitter supports HDMI cross conversion. This would allow the HDMI input to output through the 3G-SDI. The Teradek Bolt 6 also would downscale 4k signals from HDMI to HD when outputting via the 3D-SDI.

Q: 4. Is the HDMI transmitter compatible with the SDI receiver?

A: The Teradek Bolt 6 LT HDMI 750 Wireless Transmitter can transmit visually lossless video to any Bolt 4K series receiver, including the receivers with SDI outputs.

Q: 5. Does the SDI port support 1080P 59.97 In and Out of the transmitter and receiver?

A: No, the Teradek Bolt 6 LT 750 3G-SDI/HDMI Transmitter/Receiver Kit (B&H # TE102260) does not support 1080p at 59.94 fps. The video format is only available through HDMI, though the 3G-SDI port can support 1080i at 59.94 fps.

Q: 6. In the box, it says "Bolt 6 LT 750 3G-SDI/HDMI Transmitter Gold Mount", does the TX come with a Gold Mount bracket?

A: The Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (Gold Mount) does included a Goldmount power plate for both the receiver and the transmitter.

Q: 7. Can the Bolt 6 Receiver HDMI receives signal from from a Bolt 6 SDI/HDMI version?

A: The Teradek Bolt 6 LT HDMI 750 Wireless Receiver can receive the signal of any bolt 4K series transmitter, including the transmitters that SDI/HDMI inputs.

Q: 8. Will this product decrease my video quality when it does the transmutation, like will I notice any form of lower quality video being transmitted, because I'm planning to use it for live streaming?

A: The Bolt 6 XT supports transmitting video and audio in 10-Bit 4:2:2 with no Delay. It sends a very high quality broadcast level signal. It also has HDR support.

Q: 9. Will this system support two receivers to one transmitter?

A: Yes, When using the Teradek Bolt 6 XT 750 you can transmit to up to six Bolt 4K or Bolt 6 series receivers. It is only one Transmitter (input) to up to six Receivers (Output).

Q: 10. Can you use HDMI out and SDI in (or the opposite) at the same time?

A: When using the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) the only output for HDMI is on the receiver. Although the Teradek Bolt 6 LT 750 3G-SDI/HDMI Wireless RX/TX Deluxe Kit (V-Mount) has bidirectional signal, it is limited.

23/09/2024

[18 W] Using top-notch equipment for filming is key. Get high-quality gear that works with any camera for added flexibility and better overall results. Thanks!

5
18/09/2024

[21 dBm] I got my hands on the DJI transmitter and receiver and tested it for a few days. Really ran it's through it's paces and tried to lose signal. It performed very well. However, if I ever wanted to expand my wireless network by renting more receivers, I'd be screwed in my area cause no one has the DJI setup.


Teradek's Bolt 6 has been a major upgrade from the previous generations of Teradeks I've used over the years and I really like their build quality. Very solid and the antenna protection is a very nice touch. As long as you aren't trying any funny business with the antenna and keep them propped vertical (unless you change to a few H antenna) it works really well.


All in all, I DID obviously go with Teradek but they should be mindful as the DJI setup is great too. But I went with the Teradek because it's proven and expandable with rentals in my area.


Picture uploaded is my transmitter on it's maiden voyage on a Sony FX3 build.

5
13/09/2024

[18 W] And this is painful to pay for. These just work and they are built like a tank. The battery plate for the transmitter is horrible (Teradek, fix that design please). I had an old Hollyland 600 kit and I sold it. These are fantastic.

I will say, if you can get away with using the Hollyland Mars 4k kit you will be happy. I just needed a little more range, but I was always happy when we use the Mars 4k at work.

5
11/09/2024

[Yes] This is a nice setup for my Movi Pro! Very light! Works as designed.

5
03/09/2024

[1x V-Mount] Works as expected. Can cut out if going through buildings. Remember you get 750' or a little more via line of sight. With obstacles, this number greatly decreases. But boy is it 0 latency and it's the best 1080p I've seen that's wireless.

5
02/09/2024

[< 0.01 ms] Overall a great product. Bought two on sale and love them. Become very useful in complex 5ghz situations.

5
07/08/2024

[40 MHz, 20 MHz] I tried the Hollyland Mars 4K units and they were decent. However, we do a lot a band shots in our production and the delay was noticeable. I wasn't happy with that.


These units have no delay at all on our screens and have been very pleased so far.


They do get hot but that didn't affect performance. Having our camera operator be able to go anywhere in our event tent without wires gave us a great advantage with the shots we were able to get.


Best part, NO WIRES!


Charles
PTP MEDIA

5
05/08/2024

[< 0.01 ms] Love this new design and functionality

5
28/07/2024

[6 to 28 VDC] I recommend updating firmware before using. The latest firmware is not installed on your new Bolt 6. I could not get the IOS App to recognize the units until I updated the firmware on both units. The units were paired out of box and work fine. The TX is small and light. The RX is also light but if you add the Teradek Gold or V mount battery plates the RX, it gets considerably heavier as they are made of metal. I have ordered the H antennas for this unit which will improve short range connection and stability in demanding situations. Overall, these units are a big improvement over their previous models. It would have been nice if Teradek would have included the tiny hex wrench needed to remove the antennas. Only step up from here is the 12G version at twice the price.

5
23/07/2024

[1x V-Mount] The teradek system connects fast and easy to get up and started

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Teradek Bolt 6 Xt 1500 12g-sdi/hdmi Wireless Kit

$35,970.00 $44,243.10

Products You May Like

Hp 711 80 Ml Black Designjet Ink Cartridge

$183.00 $247.05

Mackie Onyx16 16-channel Analog Mixer Usb

$1,912.47 $2,333.21

Frezzi 150wh Battery Smart Screen Gold Mount

$1,976.25 $2,391.26

Mcdsp Emerald Hd V5+ Retro Everything Pack Hd V6

$3,897.00 $4,988.16

Vocas Mb-216 Matte Box Kit 15mm Lw Support

$1,781.88 $2,619.36

Anton/bauer 240wh 26v Battery Kit For Arri Alexa 35

$15,930.00 $24,691.50