O.C. White Proboom Ultima Gen2 Adjustable Mic Boom Kit

O.c. White Proboom Ultima Gen2 Adjustable Mic Boom Kit

Product Code: eq110836
Availability: In Stock

$1,590.30 $2,003.78

Qty

15 reviews Write a review

Description
Reviews (15)

Perfect for podcasters, announcers, and show hosts, the O.C. White ProBoom Ultima Gen2 Adjustable Mic Boom Kitlets you achieve optimal microphone positioning while maintaining sight of your computer monitor and guests. Its ultralow-profile design utilizes a 12" fixed horizontal arm to keep it close to your table/desk.

The mic boom provides a maximum reach of 29" and a weight capacity of up to five pounds, ensuring that it can safely and conveniently accommodate your favorite microphone. It features a 13mm base stud size and includes no mounting, but comes with all necessary tools for proper installation and adjustment.

Ultralow-Profile Design with 29" Reach 12" Fixed Horizontal Arm 5 lb Maximum Weight Capacity 12" Horizontal Extension Arm ULP-CLAmP-13 Desktop Clamp Modular Design for Added Versatility Clamps to Desks 0.5 to 1.7" Thick

Key Specs
Total Reach	29" / 73.7 cm
Color	Black
Boom
Total Reach	29" / 73.7 cm
Riser & Base
Mounting Stud Diameter	0.5" / 13 mm
Physical
Color	Black
Load Capacity	5 lb / 2.3 kg
Weight	11 lb / 5 kg
Packaging Info
Package Weight	4.72 lb
Box Dimensions (LxWxH)	19.2 x 12.3 x 4"

29" reach
12" fixed horizontal arm
5 lb maximum weight capacity
Specialized angle-limiting adjustment allows for locked rotation ranges
Black and charcoal finish
Includes all necessary tools for adjustment and installation
No mounting included (13mm base stud size)
Not compatible with the first generation of Ultima products

Related Questions and Answers

Q: 1. The kit says no mounting included. All I want is a desk clamp and the arm to stick into the desk clamp - what kind of mounting is this kit not including? Do I have to buy more accessories to make this work?

A: This kit by OC White comes with everything you need to clamp a mic arm to the end of a table. Nothing else is needed.

Q: 2. If I wanted to add a 2nd arm separately and mount it on this same pole?

A: You can ad another arm using the O.C. White PMB-1-13 ProBoom Ultima Gen2 Post Mounting Bracket, BH #OCPMB113. Also, we carry a complete two-person set up, the O.C. White ProBoom Ultima Gen2 Two Mic Arm Roundtable Special, BH #OCULP2RT13

Q: 3. The Arm is so low that it hits my table after I put in the bushing, how do I resolve that ?

A: It is only compatible with O.C. White Ultima Gen2 ULP. If you are using Gen1 it will not work.

Q: 4. What is the maximum supported monitor weight?

A: It can support monitors weights from 5-15 LBS.

Q: 5. Is there an XLR cable and is it pre routed through the boom?

A: No, the O.C. White ProBoom Ultima Gen2 Ultralow-Profile Adjustable Mic Boom Kit with Clamp does not include an XLR cable and there is no internal channel for a cable.

Q: 6. Is 1.7" the absolute maximum of the clamp, even when utilizing the secondary holes? Would 1.75" work? Or will I have to use the cast iron clamp instead?

A: The maximum opening of the O.C. White ULP-CLAMP-13 Ultima Gen2 4-Way Modular Clamp Assembly for Ultima Gen2 ULP Mic Arms packaged here with the O.C. White ProBoom Ultima Gen2 Ultralow-Profile Adjustable Mic Boom Kit with Clamp is 1.7". For thicker surfaces, the cast iron clamp mentioned (BH #OC1144013B) is more preferable in this scenario with an opening of up to 2.5". All items are available individually in this scenario.

Q: 7. Does anyone now that maximum weight that the ProBoom Elite will support? I'm hoping to mount an Electro-Voice RE20 with 309 shock mount, which weighs almost 2 pounds.

A: I use them for all four re20 mics in our studio. No problem at all. Enjoy.

Q: 8. What is the lenght of the table bushing? The table where I want to install iit is 1.5” thick.

A: The O.C. White ProBoom Ultima Gen2 Ultralow-Profile Adjustable Mic Boom Arm requires a 7/8" clearance hole for proper installation.

Q: 9. What is the maximum supported weight?

A: The maximum weight it can support is 15 LBS.

Q: 10. What is the desk width needed so the clamp will tighten properly?

A: The O.C. White ProBoom Ultima Gen2 Cast Iron Table Edge Clamp Assembly for Ultralow-Profile Mic Arms will mount to surfaces with thickness measurements between 1" - 2.5".

Nicholas	29/09/2024
[Black] I have had a podcast for about 2 years. This is by far the best boom arm I have had. I will be ordering a few more of them. 5

Chris	28/09/2024
[Black] I love this microphone arm! I attached it to the back of my desk. I pull it forward and keep it low in use. Doesn't obstruct camera. Great cable routing for clean finish. Nicely done, O.C. White! 5

Alan	04/09/2024
[Black] This arm is fantastic if you work at home on a computer. Other arms come from the top down. With this arm I can completely see my screen. It may seem pricey but it is worth it. The arm has a spring in it which you can adjust based on the weight of the microphone so that the arm floats to just the height that you need. I would strongly suggest one of these arms also because you can move them around easily which is nice for a conference call when you want to lean back a bit. 5

Kyle	01/08/2024
[4.72 lb] I have seen these mic booms on programs like Joe Rogan and others. When I finally used one on TimCast IRL, I understood why anyone would shell out $400+ for something that has $100 competition. It is like using an antigravity device to push your mic anywhere you might want it. It is awesome, and worth spending the money if you work with a microphone daily like I do. 5

Amro	04/07/2024
[Black] tldr; This is a great boom arm: it's made well, stays where you put it, and is easy to move. If I had one small nit pick it's the plastic cover on the bottom part of the arm doesn't stay put well. It might just be my unit though. At any rate, this arm is worth the money and I recommend it. 5

Lucas	04/07/2024
[4.72 lb] Both the arm and the clamp are well built and feel like they will last a lifetime. The movement is silent and buttery smooth. Once you dial in the tension it stay exactly where you place it every time with zero slop or creep. Also, while it's not in use it neatly tucks away to keep a small footprint on your desk. The reviewer saying it can't hold an SM7B is mistaken as it definitely can. Joe Rogan uses these to hold SM7Bs along with many other hosts. I have an RE20 which is only 1 ounce lighter and it holds it just fine. Granted the knob is a bit small and I could see it being hard to tighten if you had weaker hands but since most mics have movement in their attachment point it's not a huge issue once you set it. It's pricey but it has to be since it's not easy to keep the mic low while remaining strong. Cheaper arms will work as well but typically have to go up and over to have enough strength to hold the mic while fully extended. This will be the last arm you buy so over the lifetime of the product it's well worth it. Keep in mind the reach isn't super long at 29 so the extension arm might be necessary depending on the depth of your desk and where you intend on attaching the clamp. 5

Dante	02/07/2024
[Black] Where has this been all my life. 5

Jeff	24/06/2024
[4.72 lb] If you compare this to other arms that get the job done but wobble, you will see the engineering and metal craftsmanship that make this a more refined, professional, smooth experience. Although more expensive, it is likely to outlast any competition in it's price range or lower. The handling and ease of movement is also highly appreciated. 5

Ernesto	24/06/2024
[4.72 lb] This a must have for mics like the SM7B. I used El Gato Low Profile Boom Arm and it couldn't hold the mic up and it keep dropping even after tightening all the adjustable joints! I've been loving this arm! We'll worth the extra dollars! Feels like a premium boom arm with a few plastic pieces. 5