The Dsan Limitimer PRO-2000RM System 1RUis a speaker timer system for studio installations. Housed in a 1 RU rackmount enclosure, it combines the Limitimer controller with an Ethernet port and a serial data port to connect to popular touch panels and show-control systems. Limitimer Signal Lights are triggered via hardwire or across local or wide-area networks. The unit can also be controlled by other client-configured timers in the Limitimer family.

Front DIP switches allows for easy access to set options for sound cues, volume, counting format, seconds display, and wireless channels. Through a front-panel USB port, a computer can access user guides, setup examples, touch-panel programs, store personal documents, and launch an application to configure network properties (IP address, gateway, mask, port and DHCP). Limitimer PRO-2000RM Rackmount is sold without a display signal light.

Speaker Timer for Studio Installation    Ethernet Port, Serial Port    2 Signal Light Outputs    1 RU Rackmount Enclosure

• Four program presets
• Two signal light RJ45 ports
• One Ethernet jack with USB-accessible software to configure network parameters
• One RS-232 serial jack with ASCII command API
• Integrated Bluetooth transceiver to serve up to 6 remote Bluetooth signal light receivers
• Onboard speaker with selectable sound cues: beep, blink, chime
• 110-220V external power supply sufficient to drive timer and two signal lights

Related Questions and Answers

Q: 1. Hi, this laser control is compatible with the perfect cue micro?

A: Yes

Q: 2. Can this be used with a non-pro model gimbal? Like the RS3 or RS4

A: No, Please use the RS3 Pro or the RS4 Pro which will be able to mount on the MOVMAX Pro Car Mounting System.

Q: 3. Is this a stand-alone product or it needs a (separately sold) transmitter to be plugged into my mac to work?

A: Yes, this is just the clicker or wireless transmitter. To advance slides, you need to buy a separately sold unit that plugs to your computer via USB. You can actually plug the separately sold unit to 2 laptops and control 2 PP decks at the same time (e.g Main power point presentation and speaker notes). I have to say that as a producer, I strongly recommend this product. There is no better transmitter out there. This is the go to brand on any professional event. I hope this helps.

Q: 4. What is the max width and or length quadcopter frame that this unit can be used on.

A: Hello Robin and thanks for your question. We have primarily tested the A3 Pro Flight Control System with the Spreading Wings (B&H # DJS1000P) and DJI M600 (B&H # DJM600, B&H # DJMAT600PRO) series of aircraft. The approximate dimensions of the M600 series are 1668 mm x 1518 mm x 759 mm (propellers, frame arms and GPS mount unfolded) and the maximum takeoff weight is approximately 15.5kg. Hence, aircraft frames that fit within these dimensions and criteria will certainly be compatible. Larger frames should also be compatible, however we have not tested such configurations. Thanks!

Q: 5. Can this be used with a DJI RS3 Pro?

A: The MOVMAX Pro Car Mounting System is designed to be used with compatible stabilizing arms, such as the MOVMAX N2 Air Arm Car Mounting System, BH #MO810010, which is designed to be used with the DJI Ronin 2. The MOVMAX N2 Air Arm Mini Pro Kit (24.3 lb Payload), BH #MO810053, would be compatible with the DJI RS 3 Pro.

Q: 6. The overview says, "This allows you to play back your computer's audio over your home audio system," but few (if any) stereos have a "mic input," they are all line-level inputs (from CD player, tuner, tape, home theater processor, etc.). Does output from the LSP-1 need to go through a microphone preamp before connecting to a home stereo system? Thank you for your help!

A: This unit is designed to allow you to connect any audio source with a line level, 3.5mm jack style, output to a mic preamp on a mixer. The output must be connected to a mic preamp to playback at a listenable level.

Q: 7. How many can be daisy changed together? I need control 16 computers simultaneously.

A: Purchase 3 more: Simply connect the computers to the four USB ports on the Expander, and the PerfectCue to the RJ45 port. Furthermore, there's a second RJ45 port that allows you to daisy-chain addition Expanders and effectively control any number of computers. The Expander is compatible with both Windows and Mac computers.

Q: 8. Does the bluetooth version still allow for cabled connections like the non-Bluetooth version?

A: Yes. Cabled connections may still be used.

Q: 9. I want to use this to mount on the side of a car and shoot into the passenger seats. Can this mount do that?

A: You would need an articulating extension such as the Matthews Magic Riser to be able to position the camera offset from the cheese plate. You might also need a couple more rods to be able to triangulate the mount. There are some good demo videos online from Matthews you can watch.

Q: 10. If this battery pack is being used on the S1 Pro+ is it still possible to access the mount for a speaker stand?

A: The Bose S1 Pro+ System Battery Pack does not interfere with speaker mounting.