You are using an outdated browser. For a faster, safer browsing experience, upgrade for free today.
Phones: 800
$ USD
  • Your shopping cart is empty!

Baader 3.5/4nm H-alpha Cmos Filter For Astrophotography

Baader 3.5/4nm H-alpha Cmos Filter For Astrophotography
  • Product Code: eq111737
  • Availability: In Stock

$927.00 $1,334.88

This 1.25" eyepiece Baader 3.5/4nm H-Alpha CMOS Filter for Astrophotographyfrom Baader 3.5/4nm H-Alpha CMOS Filter for Astrophotographyis recommended for extremely fast optical systems from f/3.4 to 2.3 and is particularly designed for the special filter requirements of f/3 optics. The filter features a Reflex-Blocker hard coating, which has been optically polished, and has Life-Coat sealed edges. It is equally suitable for modern CMOS sensors as well as for older CCD camera technologies.

Optimized for CMOS, Suitable for CCD    Reflex-Blocker Hard Coated    Life-Coat Sealed Coating Edges

Parameters
Size1.25" Eyepiece

Related Questions and Answers

Q: 1. Can I use this with newtonian telescope using off axis reduction?

A: For the DayStar Filters QUARK H-Alpha Eyepiece Solar Filter (Chromosphere) BH #DADSZ4C • MFR #DSZ4C simply inserts into 1.25" or 2" diagonals and accepts 1.25" eyepieces.

Q: 2. I have the Celestron Eclipsmart 8" Solar Filter for my 8" SCT. Is it enough or I still need to buy an Energy Reduction filter?

A: In solar viewing, solar filters are for viewing the photosphere of the sun. The H-Alpha Eyepiece Solar Filter is for viewing the chromosphere of the sun.

Q: 3. can I insert a filter with 4mm thickness to this holder?

A: No, the NiSi V7 Alpha 100mm Aluminum Filter Holder only supports 2MM thick filters.

Q: 4. Does it cover astrophotography with just a dslr or is it exclusively for using a telescope?

A: The Thierry Legault Astrophotography discusses the use of cameras only and cameras with the use of telescopes.

Q: 5. I Have An F7 102mm Triplet Refractor From Explore Scientific, If I Purchase This HA Solar Filter What Else Would I Need To Purchase

A: The DayStar Filters QUARK H-Alpha Eyepiece Solar Filter inserts into 1.25" or 2" diagonals and accepts 1.25" eyepieces. I recommend using UV/IR cut filters. Follow this link https://bit.ly/3UpqtKg if you are using a diagonal, or https://bit.ly/494r2gU if you are not. The following energy rejection filter is also recommended for optical tube assemblies over 80mm. https://bit.ly/3vYBecc

Q: 6. Will this work on an Orion Astroview 120ST (600mm, f/5)? If so, will I need any additional adapters or extension tubes (for focusing)? Thank you.

A: The DayStar Filters QUARK H-Alpha Eyepiece Solar Filter (Prominence) BH #DADSZ4P • MFR #DSZ4P simply inserts into 1.25" or 2" diagonals and accepts 1.25" eyepieces. This design enables the use of nighttime telescopes for solar viewing. In addition to the tunable H-alpha filter, the Quark also functions as a 4.3x Barlow lens, with a 2-element lens system designed to be telecentric which flattens the field of view and reduces parallax, and optical coatings that are optimized for the 656nm H-alpha wavelength.

Q: 7. Can I insert a 4x4 filter, a 4x6 filter, and a NiSi True Color CPL Filter all into this holder?

A: You can insert 4x4 filters, 4x6 filters, and the NiSi True Color CPL Filter in the NiSi V7 Alpha 100mm Aluminum Filter Holder.

Q: 8. Is this compatible with Alpha1?

A: Yes. The Kase ND64 Clip-In Filter for Sony Alpha Cameras is compatible with the Sony Alpha 1.

Q: 9. Can I add 2mm or 4mm filter guides to the filter holder like the LEE Filters holder?

A: The NiSi V7 Alpha 100mm Aluminum Filter Holder does not have optional guides to change the filter thickness.

Q: 10. Is there any noticeable color casting with this filter?

A: The Hoya alpha II Circular Polarizer Filter doesn't have any noticeable color casting.

08/09/2024

[1.25" Eyepiece] Used it one night for shooting the milky way, significant difference in brightness.

5
04/09/2024

[1.25" Eyepiece] Baader makes some great lenses and filters, I have yet to be disappointed and this one is no different.

5
21/08/2024

[1.25" Eyepiece] Bought this and its matching tx. They seem pretty good. You can select different definitions, FHD, HD, SD, and then can assign them to the 3 types, and allocate bit rates for each. Eg you can select HD, send that to SD and a bit rate of 800 and FHD to HD and a bit rate of 2000 etc. It then selects the resolution type, eg 720P. The only limitation I find a bit strange is that the full range of resolutions, are not available all the time. They vary what is available depending on the Hz, 50Hz or 60Hz of the incoming HDMI. I am using 60Hz, and this does not have 1080i, but if I was using 50Hz, then 1080i would be included.
60Hz has 480i, 480P, 720P, 1080P.
50Hz has 576i, 576P, 720P, 1080P, 1080i.
The other strange thing I notice is that if I select a bit rate of 800Kbps, and then monitor the link at the IP level, it seems to be using about 3.5Mbps.
However, for quality and ease of use, these seem to be great devices.

5
12/08/2024

[1.25" Eyepiece] I bought this to see if it would help bring out some color and detail for my astrophotography. I have little light pollution in my area but it this thing really does what it's supposed to. I did some test shots with a colorchecker passport in regular daylight and the difference is definitely noticeable. There's a very clear boost in color and slight boost in contrast, what I mean is that they appear more clearly and saturated. It's magic! I might even start using this for some regular photography too! I have to use step-down adapters to fit these onto my lenses as I am not using it with a telescope (67mm, 58mm, 52mm). I just wish they made these in sizes native to DSLR/Mirrorless lenses! Highly recommend! Also if you are someone purchasing for a DSLR/Mirrorless camera, Get the 2 version of course, and you will need step-down/step-up adapters to 48mm. Even though 2 is not 48mm, that is the threads for this baader filter. I recommend the sensei filter adapters, cheap and very well made. In order to adapt some lens sizes down to 48mm, you might have to buy a couple adapters and stack them. I had to do this for my larger 67mm lenses. There will of course be vignetting when doing this, but its no big deal to me.

5
07/08/2024

[1.25" Eyepiece] There is no better narrowband green filter for astronomical observations and photography. I have been observing since 1974 and this filter has turned my achromatic refractor into an apochromat. Viewing on the Moon cannot be sharper eliminating chromatic aberration by using one wavelength of color and then converting to black and white monochrome. Baader's reputation exceeds itself.

5
29/07/2024

[1.25" Eyepiece] This is one of the most informative books I have seen on Astrophotography! Explained in detail everything you want to know and how to get those amazing,spectacular astrophotography shots you have been dreaming of but thought impossible or out of reach. Very clear and precise directions to the stars, galaxies,planets, and anything else you would want to look to the heavens to capture. Love this and I highly recommend this book to everyone interested in astrophotography!

5
12/07/2024

[1.25" Eyepiece] Good filter

5
07/07/2024

[1.25" Eyepiece] What can I say about an air filter. It appears to be quality made,

5
03/06/2024

[1.25" Eyepiece] They work quite well; no halos or any undesirable behavior which I could notice as of now. They did require an increase in exposure time, but that's expected.

5
18/05/2024

[1.25" Eyepiece] These units are ideal for instant connect up and they work. You can customise the bit rate and it keeps the video smooth. One TX can feed many RX.

5

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Top Bestselling Products

Baader 3.5/4nm H-alpha Cmos Filter 65mm Square

$2,061.00 $2,926.62

Baader 3.5/4nm H-alpha Cmos Filter 50mm Square

$1,647.00 $2,091.69

Baader 3.5/4nm S-ii Cmos Filter 36mm Unmounted

$1,107.00 $1,715.85

Baader 3.5/4nm O-iii Cmos Filter 36mm Unmounted

$1,095.00 $1,335.90

Baader 3.5/4nm O-iii Cmos Filter 50mm Square

$1,365.00 $2,020.20

Baader 3.5/4nm S-ii Cmos Filter 50.4mm Unmounted

$1,347.00 $1,872.33

Apple Ipad Air 13" M2 256gb Wi-fi 5g Starlight

$3,147.00 $4,720.50

Products You May Like

Canon 2/3" Uhd 17x Zoom Lens With 2x Extender

$61,425.00 $84,152.25

Fotodiox Pro Warrior Deluxe 5600k Light Kit

$899.85 $1,124.81

Hp Laserjet Pro Mfp 4101fdn Monochrome Printer

$1,617.00 $2,409.33

Leofoto Sa-x Tripod With Mg-40x Ball Head

$1,557.00 $2,351.07

Velvet Mini 2 Ip54 Bi-color Led Panel Yoke

$5,197.77 $7,744.68