The 2" Baader 3.5/4nm f/3 Ultra-High-Speed Filter Set CMOS (2")from Baader 3.5/4nm f/3 Ultra-High-Speed Filter Set CMOS (2")features three precision-grade filters recommended for extremely fast optical systems from f/3.4 to f/2.3. The set includes H-alpha, O-III, and S-II filters optimized for use with CMOS sensor cameras and suitable for CCD sensors.

3-Filter Set: H-alpha, O-III, and S-II    For f/3.4 to f/2.3 Optical Systems    CMOS-Optimized and Suitable for CCDs    Reflex-Blocker / Life-Coat    Blackened Edges

3.5/4nm half width (to harmonize exposure time of H-alpha with O-III / S-II), recommended for extremely fast optical systems from f/3.4 to f/1.8

Specially designed for filter requirements of highly opened optics, such as the Celestron RASA astrograph

Enables high contrast even with the strongest light pollution to minimize the size of stars and make nebula details accessible which is useful under a Bortle 9/8/7/(6) sky

Reflex-Blocker hard-coated and optically polished, with Life-Coat sealed coating edges

Blackened edges all around, with a filter front indicator in the form of a black outer edge on the front

Optimized for CMOS sensor cameras and suitable for CCD sensors

FWHM on each filter category is carefully designed to allow for 1:1:1 exposures, matched for typical CMOS quantum efficiency and s/n ratio

Identical filter thickness to existing standards, with attention given to parfocality in the design

Related Questions and Answers

Q: 1. is it possible to use sigma 18-35 f1.8 sony lens to a7riii with this speed booster?

A: Yes, if you have an A mount lens, then it will work.

Q: 2. This costs $1000 more than the standard model for just glow in the dark paint?

A: Yes. Movie are expensive to make for a reason.

Q: 3. Does any information show up in the viewfinder when attaching to an FS7? Such as F-Stop? Focal Length?

A: All Sigma cine lenses (except PL mount) have electronic communication for lens information to the body. This will include focal length, shooting distance and aperture.

Q: 4. are these wheels compatible with Steadicam Stand from Tiffen?

A: No, the Kupo 8" Pneumatic Wheel with Square Speed Adapter (Set of 3) is not compatible with a Steadicam stand from Tiffen.

Q: 5. My current camera is a Sony a7riii. I have a-mount glass 2.8 70-200 G & 85 1.4 zeiss... will this work seamlessly or do I have to completely switch to e-mount

A: Yes, you may use the Metabones Sony A-Mount Lens to Sony E-Mount Camera Speed Booster ULTRA with the Sony 70-200mm f/2.8 G SSM II Lens and the Sony Planar T* 85mm f/1.4 ZA Lens. Do note that this is a speed booster, with a 0.71x conversion and will make your lens one (1) f-stop brighter, so your 70-200mm f/2.8 lens will become the equivalent of a 49.7-142mm f/2 lens, and the 85mm f/1.4 will become the equivalent of a 60.4mm f/1 lens. When using a speedbooster on a full-frame camera such as the Sony Alpha a7R III Mirrorless Digital Camera, it is best to use the camera in APS-C crop mode as the speedbooster reduces the lens' imaging circle, so it will not cover the entire sensor.If you are looking for an adapter that will have no effect to the lens, allowing the lens to keep the same focal length and aperture (and imaging circle) for use of the full sensor, I would instead recommend the Sony A-Mount to E-Mount Lens Adapter (Black), B&H # SOLAEA3, for your usage needs. In either case, both adapters listed above allow you to use your Sony A-mount lenses on the Sony E-mount lens mount.

Q: 6. Putting this on the BMPCC6K will it be 18-35 or will it be 18(×1.55)-35(×1.55) like the sigma art zoom.

A: The PCC6K has a 1.558X Crop Factor. An 18 to 35mm will be the equivalent of a 28 - 55.5mm lens.

Q: 7. Does anyone have a recommendation to se the support piece that comes with it? Just need the bracket that attaches to 15mm rods to attach to the piece the lens came with.

A: Sigma SF-11 Support Foot for 210C Lens B&H # SILSFSF11210Tilta 15mm LWS Rod Lens Support B&H # TILST05

Q: 8. Is there a version with a Cooke/I lens data port?

A: No. The lens would have to be serviced in order to do so. Sigma Burbank supports a lens conversion service that will convert passive PL mount Sigma Cine Primes to a /i PL mount. If you find yourself in need of amplifying your workflow with metadata, then the conversion service will allow that without needing to buy brand new lenses. If you’re interested in the lens conversion service or wish to know pricing then please reach out to: Sigma Burbank Service Department 213-699-0561 | serviceca@sigmaphoto.com

Q: 9. Does this adapter can be use on Sony a77 and Sony a99 ii for Sigma 800mm F-mount with AF? If not what adapter do you suggest to be able to use this camera with AF?

A: No, the Metabones Nikon F-Mount Lens to Sony E-Mount Camera Speed Booster ULTRA will not work with the Sony A99 or the A77: https://bhpho.to/2dRc0U1

Q: 10. What kind of modificatiom is required for Summicron 50mm? Also, does this work with Leica APO 2x teleconverter?

A: The Metabones Leica R-Mount Lens to L-Mount Speed Booster ULTRA 0.71x will work directly with the Leica Summicron R 50mm F/2 Lens and the Leica R APO 2X Teleconverter. Keep in mind this is designed for APS-C L-mount cameras.