The Thor F-4USB-TX/RX-SFP USB 2.0 Fiber Optic Extender Kitover 1 fiber is a kit that includes a transmitter and a receiver, which can extend USB devices to a remote location over 1 fiber cable. The maximum distance is 6.2 miles. An integrated four-port hub allows for the extension of up to four USB devices without the need for an additional hub. The extender is an easy-to-use, plug and play device with no setup required. It comes standard with power supplies.

Includes Transmitter and Receiver    Maximum Extension is 6.2 Miles    No Setup Required    Comes with Power Supplies

Related Questions and Answers

Q: 1. Will the build in voice call communication system allow for communication between multiple team members / camera operators?

A: The built in call communications is for talkback between devices with the USB and optional microphones, requirements for using the talkback.

Q: 2. For this DJI system, Is there a limit to the total amount of transmitters you can have in a single geographical area?

A: DJI does not state a max total amount of DJI Transmission Standard TX/RX Combo transmitters recommended in a single geographic area. However as more transmitters are operating in a single area, there will be less available channels in order to avoid interference for a stable connection.

Q: 3. Does this come with a case?

A: Yes, the DJI Transmission Standard TX/RX Combo comes with a protective carrying case.

Q: 4. If the Komodo is being powered by 2-Pin AC power, can it passthrough power to the TX unit? Trying to flying this on an RS2 and wondering if I would also have to put on a v-mount on it.

A: No, the RED Komodo does not have an appropriate power output on the body, it only has an input. You would need a V mount battery, to go along with the Vaxis ATOM 600 KV Wireless TX/RX Kit for RED Komodo, in order to power the transmitter.

Q: 5. what battery powers the transmitter? obviously a v mount powers the receiver but what about the transmitter

A: The transmitter accepts a np-f style type battery. Please review the following v-mount/ NPF style type batteries that we have to offer for this unit https://bhpho.to/3lJU9Ab

Q: 6. The transmission combo we bought came with the high bright monitor. Does the combo not come with the monitor anymore?

A: This DJI kit is just the Transmitter and Receiver. DJI still offers a kit with the High Bright display, which is listed below. DJI Transmission with High-Bright Monitor Combo BH #DJTRC

Q: 7. Can the USB-C port on the transmitter be used to power the unit in the event I do not wish to mount a V-mount battery to the transmitter?

A: No, The Vaxis ATOM 600 KV TX powers using a single, separately available V-mount battery that passes power through to the dual battery plate; RX powers using a USB Type-C power source or using its L-series battery plate. Only the RX will support USB-C powering.

Q: 8. Can the high-bright DJI monitor be used for two transmitters at the same time for A cam and B cam?

A: You can only connect the display to a single transmitter when using the DJI Transmission Standard TX/RX Combo. The DJI High-Bright Remote Monitor display would only accept one input at a time.

Q: 9. how good is latency for pulling focus?

A: The latency of the DJI Transmission Standard is about 70ms which is about 3-4 frames. While it is not zero frames of latency, you could learn to pull focus using this solution.

Q: 10. Can you turn off the wireless signal when you don't have a need to transmit the signal and just use it to power the camera?

A: Yes, you still have battery communication from the Vaxis ATOM 600 KV Wireless TX/RX Kit for RED KOMODO (V-Mount, Black) to the RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (Canon RF) when the transmitter is turned off.