The AGM NVG-40 Gen 3 Night Vision Goggle Binocularis defined by its compact, comfortable, and versatile design—making it ideal for a wide array of stealth and tactical applications. It can be mounted on tactical or aviation helmets, worn on the head, or held in the hand, and you can even disable one intensifier tube to convert it into a monocular for specialized uses. The unit can run on one included CR123A lithium battery or an easy-to-find AA alkaline, and there is an optional battery pack for extended operation.

This version of the NVG-40 features dual 64-72 lp/mm resolution 3rd generation autogated image intensifier tubes that offer peak performance versus earlier generations, with exceptional resolution and clarity. Autogated intensifiers constantly operate to improve image clarity and contrast in dynamic lighting conditions so views remain crisp and sharp in changing circumstances. The tube condition is designated as Level 1: Representing the cleanest tubes without spots for the clearest views. The design allows you to disable either side, based on your preference, and move it out of the way. This enables the use of just one side as a monocular so you can maintain maximum situational awareness. Sensors activate the NVG-40 when flipped down to your eyes and powers them down when flipped up and stowed.

The included goggle kit allows you to adjust the eyepiece position up and down and forward and back to get the perfect fit depending on your helmet style with a wide 54-72mm interpupillary adjustment distance to accommodate most face sizes and shapes. Its -6 to +2 dioptric correction allows focusing compensation, even if your eyesight isn't perfect. Once properly adjusted it has an extra-long 25mm of eye relief for maximum comfort with a close focus distance of just 10 inches and an integrated IR illuminator that allow you to pack gear, do weapon checks, set up an LZ, or perform triage and first aid without giving away your position. AGM includes a pair of demist shields to prevent fogging and protective sacrificial windows that protect the objective lenses from wind-blown sand and debris.

Versatile, Compact, & Comfortable Design    Gen 3 Autogated Intensifier Tubes    Clean Level 1 Tubes for Clear Views    Use as a Binocular or Monocular    1x27mm f/1.3 Lens System    Comfortable 40° Field of View    Short 10" Minimum Focus Distance    Long & Comfortable 25mm Eye Relief    54-72mm Interpupillary Adjustment Range    Runs on One CR123A or AA Battery

• Binocular design improves comfort during extended use, or can be used as a one-eye monocular by choosing a side to use and rotating the tube up and out of the way
• Intensifier tube amplifies ambient light to allow a user to see in extremely low light and requires moonlight or bright starlight to function properly
• Unmagnified 1x power ensures a comfortable 40° field of view to maintain situational awareness and scan terrain for targets
• 27mm f/1.3 lens system ensures a compact and lightweight form factor for maneuverability over rough terrain or in close quarters
• Dual 64-72 lp/mm resolution Gen 3+ autogated intensifier tubes
• Autogated tubes automatically control the amount of light reaching the intensifiers so that bright lights do not damage the unit and to reduce blooms
• "Level 1" tube condition has no spots and indicates a very clean tube for the clearest views
• Multi-coated optics enable maximum IR transmission so as much light gets to the intensifier tube as possible
• Built-in infrared (IR) illuminator provides additional light with a range of up to 10' (3m) for better visibility at close range without giving its user's position away
• 10" minimum focus distance allows user to perform tasks like gear checks and packing/unpacking without giving away their position
• Long 25mm eye relief reduces eye strain for easy & comfortable use as a NV goggle

• Individually focusing eyepieces & objective lens enables precise focusing when used as a binocular or monocular
• 54-72mm interpupillary adjustment range accommodates most users
• -6 to +2 dioptric correction on each eyepiece
• Manual gain control allows the user to adjust image brightness and adapt it to current ambient light conditions while reducing or eliminating night blindness
• When worn on head or helmet, unit will automatically power down when stowed (flipped up) and turn on when deployed (flipped down)
• Bright light cut-off shuts down power when exposed to excessive levels of light for more than 10 seconds
• Automatic shut-off system turns off the device when it is unused (controls are not touched) for 60 minutes to preserve battery life
• In-view low-battery, bright light cut-off, and IR illuminator on indicators

• Goggle kit allows for vertical adjustment and fore-and-aft adjustment for easy use by most individuals
• Bayonet/Horn Interface Shoe for installing the NVG-40/NVG-50 to either a standard bayonet/horn type headset or a helmet mount
• Winged eyecup: Adjustable for left or right eye use, the eyecup conforms to the contours of a user's face to prevent outside light (like from streetlamps or flashlights) from interfering with the user's ability to see, and prevents light from the display from leaking out and giving away the user's position
• Demist shield: Used to prevent the eyepiece lenses from becoming fogged
• Sacrificial window: Replaceable window and used to protect the objective lens during operation in adverse conditions, such as wind-blown sand that can scratch/etch glass and affect clear views
• Soft carrying case holds the NVD and accessories

• Compact design is easy to use by hand and comfortable to wear on the head or a helmet
• Lightweight and durable aluminum housing
• Matte finish limits reflection off NVD surface
• Preinstalled NVG shoe/mounting bracket allows it to be installed on AN/PVS-7D, AN/PVS-14, AN/PVS-7A/C, AN/PVS-15, and AN/PVS-18 mounts, or to mounts with a mini-rail interface
• Tethered objective lens caps protect the objectives while making it easy to deploy quickly without the fear of losing them
• Runs on one included CR123A lithium battery to maximize runtime, or the easy-to-find AA size
• Optional remote battery pack for extended use
• Length: 4.5"
• Weight: 22.75 ounces

Related Questions and Answers

Q: 1. How big is this unit, can it be hidden?

A: This model is 4.3 x 2.4 x 0.8 in size. It can be hidden inside a box or other creative locations.

Q: 2. can the on screen markers be turned off to get clean HDMI out?

A: No, the Minolta MN80NV Full HD Night Vision Digital Camcorder (Maroon) does not feature clean HDMI output.

Q: 3. Does the helmet have a slide up and down face cover?

A: The Newcon Optik NVS-9 3rd Gen Autogated Aviator NVD Binocular DOSE NOT INCLUDE THE HELMET. B&H nor Newcon does not sell helmets.

Q: 4. Is the HDMI output clean?

A: The Minolta MN2K10NV 2.7K Ultra HD / 48MP Night Vision Camcorder (Black) does not list clean HDMI output.

Q: 5. Does the plastic cover did not get sticky with time?

A: The Bushnell 6x50 Equinox Z2 Digital Night Vision Monocular does not get sticky over time.

Q: 6. can be used at daylight?

A: The screen for the Bushnell 4.5x40 Equinox Z2 Digital Night Vision Monocular displays color images during the day, and black and white when the night vision is on.

Q: 7. What's the magnification/angle of view? There is no information about what focal length the lens is.

A: The SIONYX Aurora Pro Explorer Night Vision Monocular Camera Kit features a 16mm lens which has a 44 degree angle of view.

Q: 8. How much time of video can we get with one set of batteries?

A: The Bushnell 6x50 Equinox Z2 Digital Night Vision Monocular uses AA batteries so the length of the video time will vary based on the brand and type of battery being used.

Q: 9. what is the fps of the video capture?

A: Bushnell does not list FPS. In its manual it only list frame rate as slow, medium and fast

Q: 10. Would the use of the mini-USM IO allow use of this camera for a Zoom video conferencing application as well?

A: The Minolta MN80NV Full HD Night Vision Digital Camcorder (Maroon) will not have a webcam mode via USB.