Polymaker 1.75Mm Polylite Pla-Cf Filament Black

Polymaker 1.75mm Polylite Pla-cf Filament Black

Product Code: eq112336
Availability: In Stock

$104.97 $142.76

Qty

15 reviews Write a review

Description
Reviews (15)

Bring your ideas to life with the Polymaker 1.75mm PolyLite PLA-CF Filament. Seasoned builders can create working prototypes and fully functional models designed for real-life applications such as replacing metal parts thanks to the enhanced strength of carbon fiber. For use specifically with 3D printers that can use this material, it requires a print temperature of 410 to 446°F and is compatible with direct and indirect drive systems with a retraction distance of 1 and 3mm respectively. You can achieve a print speed from 25 to 60mm/s, giving you quick yet reliable printing.

1.75mm Carbon Fiber Filament 410 to 446°F Print Temperature 25 to 60 /s Print Speed Direct & Indirect Drive Compatible

Parameters
Filament Diameter	1.75 mm
Filament Material	Carbon fiber
Color	Black
Weight	2.2 lb / 1 kg
Packaging Info
Package Weight	2.84 lb
Box Dimensions (LxWxH)	8.8 x 8.7 x 2.9"

Related Questions and Answers

Q: 1. What is the diameter of the base plate (where the tripod head attaches)? Will this fit nicely with the Manfrotto BeFree video head (it's base is 40mm)?

A: The base plate is about 2" wide, and would fit the Manfrotto BeFree video head quite nicely on it.

Q: 2. Is the center column removable and if so then how low it can go to the ground?

A: With the Slik Pro CF-733 Tripod (Black) one can remove the lower part of the center column to get lower to the ground. One can then get down to 8.3" (This does not include the height of any head one may use). Alternatively one can invert the center column to get even lower to the ground.

Q: 3. Will this case accommodate D810 with 24-70 Nikon VR lens?

A: The Nikon CF-DC4 Semi-Soft Case (Black) will not accommodate the D810 with the Nikon 24-70mm f/2.8 lens.

Q: 4. "Center column is removable, which allows the tripod to be set at a minimum height of 4.9" How can it be used without the center column, unless there is a short one available to take its place?

A: The center column splits near the top, turning it into a short center column.

Q: 5. Is this case large enough to hold the Nikon D750 with a 24-120mm lens?

A: It holds my D810 wit a 24-70 perfect. I hope this helps!

Q: 6. Is this made in Thailand or China?

A: This tripod is manufactured in Thailand.

Q: 7. Will this case fit the D850 with the MB-D18 attached?

A: No. The following unit will accommodate the body only with no grip attached.

Q: 8. Is the centerpost made of CF or Aluminum?

A: The center column is aluminum.

Q: 9. Will this fit a Nikon D850 with a 24 f1.8 lens? Will it be snug or will there be some space??

A: According to Nikon's compatibility chart, yes, the Nikon D850 DSLR Camera will fit in the Nikon CF-DC4 Semi-Soft Case with the Nikon AF-S NIKKOR 24mm f/1.8G ED Lens, and will fit stored with the filter, lens cap, and bayonet lens hood in the reverse position.

Q: 10. Does the center column remove in order to have minimum height of 4"?

A: The bottom main section unscrews leaving just the top portion.

Mikel	17/09/2024
[Black] This Teal PLA turned out great. Inky has been out front for about 6 months under various weather condition and no issues. This turned out to be the best looking Teal for Inky. 5

Daniel	09/09/2024
[Black] This material is one of my hands down favorites. The color intensity is truly a charcoal black. To me, it beats all other silk materials because of its light diffusing properties. Its rough to the touch and doesn't have the dry time CF does. Fantastic material and I will keep buying it again and again 5

Daniel	13/08/2024
[2.84 lb] This stuff is fantastic. I don't see much of a difference in color, versus other materials of the same color but this material has had the least number of issues along with the bulk of the prints I have made with it. I tend to like polymaker in general for standard colors and base materials so, I will purchase this again when needed. 5

Daniel	11/08/2024
[Carbon fiber] This stuff is impressive. It has a much higher tolerance for printing fine pieces. Its sand-able and workable and much more rigid than PLA. It does have some issues I'm finding joints aren't as well supported because of the fiber content versus plastic but once I engineer the model to accommodate, it works amazingly well. 5

Patrick	08/08/2024
[Carbon fiber] I have been using this with my Snap maker and have gotten excellent results!! Very happy with this PLA. 5

Thomas	07/08/2024
[Black] This item arrived quickly from BH Photo. It was packed well with no damage. The storage box is large and can allow 2 1kg rolls or one larger roll to be stored. It has a nice dessicant storage space and humidity guage. It is a bit pricey since you can also get a heated drier/storage box that is less money now days. I just wanted a box without the cord attached. 5

Mikel	04/08/2024
[Black] This took two spools of yellow to create this basketball size Pac Man for my front yard garden. This yellow PLA turned out great and has weathered for about 6 months with no discoloration. 5

Nathan	19/07/2024
[Carbon fiber] Always solid PLA. Does what It's supposed to do. Very consistent product. 5

David	06/07/2024
[Carbon fiber] Polymaker is one of the best filaments out there and for sure the best company out there I can think of. They do so much good for the community so I'm always more than happy to support them any way I can. This stuff prints like a dream. 5

Daniel	25/06/2024
[2.84 lb] Literally no reason to have this material, but its so fun. It glows bright and as expected, making stars, fidgets, light covers, what a blast. 5