Offering improved weather and UV resistance, the Polymaker 1.75mm PolyLite ASA Filament, allowing you to create items for real-life applications for outdoor use.

Designed as an alternative to ABS filament, ASA enables you to create a wide range of items with enhanced mechanical properties while printing with a matte finish. PolyLite ASA has a printing speed range between 30 to 50mm/s and a printing temperature range of 464 to 500°F as well as a bed temperature range of 167 to 203°F. This filament supports direct and indirect drive systems with a retraction distance and speed of 1mm at 20mm/s and 3mm at 40mm/s, respectively. If you are printing a creation bigger than your fist, an enclosure is highly suggested.

1.75mm Diameter    1kg Weight    30-50mm/s Printing Speed Range    464-500°F Print Temperature Range    167-203°F Bed Temperature Range    Direct & Indirect Drive Compatible

Related Questions and Answers

Q: 1. Can two of these EW-D active antenna splitters be daisy chained so that 6 receivers can share a single pair of antennas?

A: Yes, the Sennheiser EW-D ASA 4-Way Active Antenna Splitter with DC Distribution for EW-D Wireless Systems can connect to another unit using the "RF Out A" BNC connection of one unit into the "ANT RF in B" connection of a second unit.

Q: 2. in travel photography specific to windy spaces, do you have any suggestion a practical way to weigh down the tripod to prevent it blowing over?

A: The tripod has a weight hook underneath the spider which you can hang a bag from.

Q: 3. Can this work with R- and Q-band receivers simultaneously? The 1/2 wave antenna only supports either R or Q band.

A: The Sennheiser EW-D ASA covers the Q, R, and S frequency ranges, from 470 to 694 MHz. The limiting factor in terms of frequency range would be the antenna used.

Q: 4. This is backwards compatible with G4 systems right? I know that you need this for the EW-D series, but from what I'm reading this unit will work to combine existing G4 or G3 units as the previous model did as well...Right?

A: Yes, the Sennheiser EW-D ASA 4-Way Active Antenna Splitter with DC Distribution for EW-D Wireless Systems (470 to 694 MHz) is backwards compatible for use with the Sennheiser EW G3 and EW G4 series wireless receivers.

Q: 5. Will this fit a pro or gripped Nikon body?

A: I love mine with my Nikon D700. It's comfortable even with my 24-70 2.8.

Q: 6. Can I use this system with the 1/4'' and 1/2'' antennas? I don't really need the very big antennas. Thank you

A: You can use B&H # SEHALFWAVEDQ for compatibility with the Sennheiser EW-D ASA.

Q: 7. Is this the replacement for the ASA-214 which appears to have been discontinued?

A: Yes B&H # SEEWDASAQRS is the replacement.

Q: 8. Bundle 5 says, "It also provides DC power to the four receivers, for less clutter in your rack." Is this true? How?

A: The EW-D ASA is able to provide power to connected receivers via the BNC antenna connectors.

Q: 9. Hi pal. Is the ew-d asa backward compatible with the analog A, B and G ew frequency systems?

A: Yes the Sennheiser G4 EW-D is compatible with G3 systems that function in 470 to 694 MHz.

Q: 10. Hey guys, I have the RRS camera plate on my Sony a7R. Would that fit RRS plate fit this ballhead?

A: As the Q Series Double Action Ball Head on the MeFOTO BackPacker Travel Tripod (Titanium) is compatible with Arca-Swiss type quick release plates, yes, the Really Right Stuff quick release plate should be compatible for use with the above tripod/ball head setup.