Featuring an aluminum frame with small built-in magnets, the 6-stop Kolari Vision Magnetic ND Filter Nikon Z-Mount 6-Stopfrom Kolari Vision Magnetic ND Filter Nikon Z-Mount 6-Stopsecures magnetically to the camera mount, and your lens then mounts on top. The filter sits securely between the camera and lens. It's compatible with full frame Nikon Z-mount cameras. The filter material is glass. A small removal tool is included but not required. The compact tool looks like a guitar pick and is included just in case, as the filter can easily be removed by hand.

The ND filter darkens the image a bit when shooting in outdoor environments. It allows you to apply motion blur to moving subjects and lets you shoot with slower shutter speeds and longer exposures. In addition to this, this ND filter is also capable of being used in combination with infrared filters up to 720nm. One way of achieving this is by using it with a Kolari circular IR lens filter, sold separately. With the clip-in filter attached to the camera lens mount and the optional IR filter mounted on the front of your lens, you can have two filters working together at the same time.

Magnetically Attaches to Camera Mount    Sits Between Camera and Lens    Aluminum Frame with Built-In Magnets    Glass Filter    Can Be Used with IR Filters up to 720nm

Nikon Z6 II and Z7 II

Nikon Z5, Z6, Z7, and Z9—due to a weaker magnetic force within these four compatible cameras, the filter has to be attached while the camera is laid on its back, with the lens mount facing up. After the filter is secured magnetically and the lens is mounted, the filter will stay firmly in place, and you can then freely move the camera.

Related Questions and Answers

Q: 1. Can these filters be used at full 11mm zoom on Canon 11-24 f4 lens? Read somewhere that some of these rear mount filters can damage lens and not recommended to use filter in the lens rear filter slot at the widest zoom because the rear glass element will hit the filter.

A: Yes it can be used throughout the full zoom range on the 11-24mm and it will not damage the lens.

Q: 2. Does this filter sit in-between the sensor and the adapter, or in-between the adapter and the lens?

A: This filter will mount inside the adapter. It slides into the opening in the adapter.

Q: 3. Do these filters work on both the EF-L and the SA-L version of the MC-21 converter?

A: The Aurora-Aperture Adapter Mount Format PowerND 3.6 Filter for Sigma MC-21 Lens Mount Adapter (12-Stop) is compatible with the Sigma MC-21 Mount Converter/Lens Adapter (Sigma EF-Mount Lenses to L-Mount Camera) and the Sigma MC-21 Mount Converter/Lens Adapter (Sigma SA-Mount Lenses to L-Mount Camera).

Q: 4. Are there any other filters offered for this version other than the included filter?

A: There are quite a few listen on the Kase website as well as these ones: KANDFSN1424

Q: 5. What is the difference between the Skyeye and Wolverine? Is there an optical difference?

A: The main difference between the Kase 77mm Skyeye Professional ND Magnetic Filter Kit with Front Caps and Case and the Wolverine magnetic system is the Skyeye system is not shockproof like the Wolverine system, and the Skyeye filters have a thread at the front to allow screwed circular filters to be used with the system.

Q: 6. I plan to use this set in combination with a 15-35mm lens. If I want to stack two or even three filters, will I see vignetting?

A: Yes, vignetting would be possible when stacking two or three filters in this Kase 82mm Skyeye Professional ND Magnetic Filter Kit on a 15-35mm lens.

Q: 7. Is this for the F mount version of the lens? The photos show the F mount lens.

A: There is the Kase Rear Lens ND Filter Kit for Nikon 14-24mm, BH # KARKN1424 which is for the Nikon AF-S 14-24mm f/2.8G lens. https://bhpho.to/2Z0hHEy

Q: 8. I have a Batis 25mm. will this filter fit the lens, and also, will the original lens cap fit on top of this filter?

A: Yes, this will fit the 67mm filter threads of the ZEISS Batis 25mm f/2 Lens for Sony E. However, since this filter is made wider so as to avoid vignetting, you will need a 72mm lens cap. Here is a quality one to match your lens. B+W 72mm Pro Snap-On Lens Cap MFR #65-1065134 • BH #BWLC72

Q: 9. is the 67mm version front threaded? what's the size? want to fit my lens cap

A: It is front threaded. The front thread is 72 mm. The front thread is written under the Specs tab in the section that says Front Accessory Thread.

Q: 10. Does this filter work with an M.Zuiko Olympus F2.8 Pro 12-40mm?And would a step down ring 52-62mm cause vignetting?

A: It will work with that lens. If your using a 52-62mm step up ring from a smaller lens you will be ok. If your using a step down to put a 52mm filter on a 62mm lens then you will most likely have vignetting.