Canon Pm-V1 Pl Mount Case By Jason Cases

Canon Pm-v1 Pl Mount Case By Jason Cases

Product Code: eq112477
Availability: In Stock

$597.00 $728.34

Qty

7 reviews Write a review

Description
Reviews (7)

The Canon PM-V1 PL Mount Case from Jason Cases is a hard case that features a high-grade, laser-cut, custom foam interior housed inside a genuine Pelican 1170 case. The case accommodates a Canon PM-V1 PL mount, a Nikon mount, shims, four mounting screws, and a screwdriver. It weighs only two pounds. It is airline carry-on friendly, but be sure to check with your carrier before traveling to confirm.

ript>

For Canon PM-V1 PL Mount High-Grade Laser-Cut Foam Interior Genuine Pelican 1170 Case

Key Specs
Color	Black
Carry/Transport Options	Handle
Type of Closure	Latch
Interior Type	Precut Foam
Water Resistance	Waterproof IP67
Dimensions	Exterior 11.64 x 8.34 x 3.78" / 29.57 x 21.18 x 9.6 cm Interior 10.54 x 6.04 x 3.16" / 26.77 x 15.34 x 8.03 cm 1.08" / 2.74 cm (Lid Depth) 2.08" / 5.28 cm (Base Depth)
Weight	1.96 lb / 0.89 kg (Without Foam)
Parameters
Carry/Transport Options	Handle
Type of Closure	Latch
Interior Type	Precut Foam
Features
Pressure/Purge Valve	Yes
Security Lock	Accepts Padlock (Not Included)
General
Water Resistance	Waterproof IP67
Maximum Buoyancy	7.25 lb / 3.29 kg
Maximum Volume	0.12 ft³ / 3398.02 cm³
Padded Interior	Yes
Materials	Exterior: Polypropylene
Dimensions	Exterior 11.64 x 8.34 x 3.78" / 29.57 x 21.18 x 9.6 cm Interior 10.54 x 6.04 x 3.16" / 26.77 x 15.34 x 8.03 cm 1.08" / 2.74 cm (Lid Depth) 2.08" / 5.28 cm (Base Depth)
Weight	1.96 lb / 0.89 kg (Without Foam)
Packaging Info
Package Weight	2.74 lb
Box Dimensions (LxWxH)	12 x 8.5 x 4"

Related Questions and Answers

Q: 1. Can this be used to extend a full-frame lens like a typical tele-extender? (i.e. a FF 12mm would become a FF 19mm)

A: No, the Tokina Canon EF to PL Mount 1.6X Expander is designed for use with super 35mm lenses only. If a full frame lens is used, there will be heavy vignetting.

Q: 2. Will this case work with the APX 8000H and their charger?

A: The Motorola APX 8000H radios are larger in width and height than the Motorola CP200D radios that the Jason Cases Case for Ten Motorola CP200D Radios with Antennas & 6-Position Multi-Unit Charger is designed to house. As an alternative, check out Pelican 1610 Case with Foam Set (BH #PE1610FB) which would allow for custom plucking of the foam to fit the APX 8000H form factor: https://bhpho.to/37cOAVZ

Q: 3. Will this case fit the FS7 M2?

A: Yes it will fit the Sony FS7 M2.

Q: 4. Would this fit the pelican 1610? I noticed the dimensions are the same as the other 1610 option.

A: The Jason Cases Pelican 1600 and 1620 Lid Organizer will not fit the 1610 case. However, they make this other version for the 1610: https://bhpho.to/39ujyW4

Q: 5. Does this adapter maintain the focal length of the adapted S35 lens on the FF sensor?

A: The Tokina Canon EF to PL Mount 1.6X Expander adapts a PL lens to a PL camera while expanding the image circle from 29.3mm or less lenses to 46.7mm image circle covering VV digital format. The adapter multiplies focal length by 1.6x. Lens must be set to T2 or above for best performance. Also, the lens you work with must have a PL flange to cone height of 20mm or less. Tokina includes a Lens clearance check tool with the adapter.

Q: 6. I'm looking into this mount for my Zcam F6 which is full frame. I want EF on the camera body end to convert to PL to mount my S35 Illumina's. Firstly will this mount work for me? And can you confirm the camera end will not hit the sensor, it looks rather deep in the photographs....

A: Please review the following item SLR Magic PL to EF-Mount Adapter BH #SLRPLEFA • MFR #SLR-PL/EFA https://bhpho.to/3qHjeOg

Q: 7. Can this fit the 7" Red LCD Monitor?

A: Yes. It has a cut out for the 7" RED LCD monitor

Q: 8. Will autofocus work with this?

A: The KIPON Lens Mount Adapter for Nikon F-Mount Lens to Canon RF-Mount Camera does not support autofocus or any camera to lens communication. Everything has to be set manually.

Q: 9. Can this be used to adapt a Canon FD mount EF or Contax CY mount EF to a Canon C700 GS PL mount or canon C300 mkii pl mount?

A: The Tokina Canon EF to PL Mount 1.6X Expander will not work because it is meant to adapt EF-S lenses to full frame cameras. The C300 and the C700 are both Super 35 cameras. thus this will not work.

Q: 10. Is this compatible with Alexa 35?

A: Simmod does not state that the Simmod Canon FD Lens to ARRI PL Mount is compatible with the ARRI ALEXA 35.

Anton	12/09/2024
[Yes] Definitely recommending this case. A bit more expensive than pick your self foam but looks great and everything seats there tight. That's the best size for C300mk2, smaller one doesn't feet any extra accessory and bigger one is just a bit too big. Very happy with the case. 5

Eddie	01/08/2024
[12 x 8.5 x 4"] I love the size and shape of this case. A little on the heavy side but I prefer it that way. I can fit the canon c500 Mark ii with all the accessories in it. I opted out for this one instead of the compact version because of the fact that you don’t have to dismantle the side grip of the camera each time you put the camera inside the box. Just be aware that if you have a cage around the camera you won’t be able to fit the camera in there. 5

Josias	26/06/2024
[Precut Foam] This Jason Case is great. It allows for me to store my C300 Mark III with the top handle and monitor still attached to the camera body. It has two slots for lenses, several media slots, battery slots, and dedicated spaces for the rest of the accessories that come with the C300 Mark III. The hard shell case and laser cut insert insure that my camera is safe when transporting to jobs...plus it has wheels! 5

charles	25/06/2024
[Precut Foam] Jason Cases are the best! Customer support excellent! I contacted them before buying and they talked me through everything even sent Pics of the case with All Accessories in the case since the camera had not shipped to everyone yet. But they Had one and Sent me Photos of How it would fit and it Fits perfectly! NO other company would do that!! LOVE THOSE GUYS!!! 5

Mark	11/04/2024
[Black] This holds the XF705, and just about everything else I can humanly think to throw in it. Extremely well made and durable. The cuts are well thought out. I have 4 batteries (small ones have to be put in sideways) one small charger, one large charger, boom mic, shoe spotlight, SD Cards, other random chargers, etc. and still have room in it. Rolls very well. GREAT PRODUCT! 5

Art	06/04/2024
[Latch] I just purchased 2 Black Magic URSA Studio cameras and knew the challenge to have one case include cameras, accessories and add extra studio viewfinder was going to be a challenge. Jason Cases was the best choice due to it's well-designed cases, and size. And the extra cutouts allowing for miscellaneous equipment was the icing on the cake! Well Done! 5

Anthony	30/11/-0001
[Handle] They case is very well done. It has plenty of space to store items and is very durable. It is one of the few options available for the FX9. 5