Compatible with several fixtures, the 10' CHAUVET DJ IEC Power Cable 10fthas male and female IEC plugs and can be used for purposes such as attaching an extension cable.

IEC Male to Female

Related Questions and Answers

Q: 1. will this work with magicq pc software?

A: It supports the Protocol; ArtNet, sACN

Q: 2. Will this work with the CHAUVET DJ Hurricane 1200 Portable Fog Machine?

A: Yes. 100% unit will attach via control port in back of chauvet DJ Hurricane 1200 unit.

Q: 3. I'm currently using a D-Fi Tx to control a few lamps on stand. Can I use multiple Tx on the same channel to broaden the coverage

A: In a system you will only use one CHAUVET DJ Wireless D-Fi XLR Transmitter. The other fixtures will need CHAUVET DJ Wireless D-Fi XLR Receivers.

Q: 4. Can a 3-pin connector be converted to 5-pin to control the Nova 600 and Nanlite 500/720?

A: Yes, you can step down from 5-pin DMX to 3-pin DMX with the following adapter cable: the Kopul DMX35PA-S 3-Pin Male to 5-Pin Female DMX Adapter Cable (6"). Some functionality may be lost, but it would be minimal.

Q: 5. Is this Bluetooth?

A: No it's not

Q: 6. does it come with power adapter?

A: Yes, the CHAUVET DJ Obey 40 DMX Controller does include a power adapter.

Q: 7. What transmitters work with this receiver?

A: BH #CHDFIXLRTX is the transmitter for BH #CHDFIXLRRX.

Q: 8. Does this support RDM?

A: Unfortunately, the DMX-AN2 does not support RDM.

Q: 9. Does this include a remote?

A: The CHAUVET DJ Hurricane Haze 1DX Water-Based Haze Machine does not include a remote control device.

Q: 10. How many different kind of fixtures can I connect to this controller and manage at the same time?

A: There is no limit to the number of fixtures you could connect to a DMX console like the CHAUVET DJ Obey 40 DMX Controller (B&H# CHOBEY40). However, if you prefer to control each function of each fixture separately then you will need one channel per function per fixture. For example, if you have three fixtures with five functions then you would need 15 channels to control each of the fixtures' individual functions separately (3 fixtures X 5 functions = 15 channels). Of course, fixtures are often controlled in groups and in such a case they would be set to the same channel. So, if those five fixtures are instead to be controlled together as a group to do the same thing (e.g. to dim at the same time, to strobe at the same rate, and to move in the same direction) then you can set them to the same channel as each other. That only takes up three channels regardless of the number of fixtures (1 set of however many grouped fixtures x 3 functions = 3). This is true for DMX control in general with all DMX control boards, not just with the CHAUVET DJ Obey 40 DMX Controller (B&H# CHOBEY40).