Transmit 4K60 video with companion KVM commands up to 328' away with the MuxLab 4K HDMI-over-IP PoE Extender Transmitterfrom MuxLab. The transmitter can transmit video directly to the separately available 500772-RX receiver on a local LAN, and it is powered via PoE on a supported network or by an optional power supply. The transmitter will fit right into your IT server room, media center, meeting room, or classroom environment where video distribution and central keyboard control is used.

The transmitter supports up to UHD 4K60 4:2:0 HDMI input, and it supports HDR video. The USB Type-B input allows you to transmit keyboard and mouse control over the same Ethernet cable to the receiver. It supports embedded HDMI audio and also has an independent 3.5mm audio input to embed analog audio, and it features a 3.5mm audio output for monitoring. It also supports point-to-multipoint and multipoint-to-multipoint configurations when using an Ethernet switch. It can deliver a 4K signal up to 328' over a Cat 5e/6 (or greater) cable.

Extend HDMI/USB Signals via IP    Transmit up to 4K60 HDR Video up to 328'    Powered via PoE on Supported Network    HDMI and USB Type-B Inputs    HDCP 2.2, Cat 5e/6 Cable Support    3.5mm Audio Input and Output

One operator can manage multiple servers/workstations

Supports video input/output up to 4K30 4:4:4 and 4K60 4:2:0

Transmit video up to 330' over Cat 5e/6 cable

One HDMI input and USB Type-B input for USB output from keyboard and mouse

Supports hundreds of transmitters and receivers, depending on network bandwidth

Supports multiple point-to-point and point-to-multipoint applications

Supports HDR video

PoE powered, or it can utilize an optional power adapter

Supports audio embedding and audio output

Related Questions and Answers

Q: 1. How many receivers can be connected to one transmitter?

A: The number of TX and RX that can be used with the Avenview HDMI Unlimited LAN Extender Set over Single CAT6 is dependent on Bandwidth a Gigabit Ethernet switch is recommended. Also, up to 150 receivers can be connected and routed to at the same time.

Q: 2. Does this come with the power supply?

A: Yes, the MuxLab 5x1 HDMI Switcher with 4K Support comes with a 5V DC power adapter.

Q: 3. What is the latency in milliseconds?

A: According to IOGear "This unit is rated at near zero latency so it will be less than 1MS."

Q: 4. Has anybody used this device to feed HDMI over 200ft Cat5/6 to Black Magic switcher input?

A: We have tried to run 4 tv's 2 at 50ft and 2 at 100 - 200ft strictly HDMI off of this thing and it usually has an issue where 1 TV will turn off or loose signal. 4 tv's under 50ft usually works fine. Don't know about a single run though. if your converting over to cat 5 it would fall more on the hdmi to cat 5 converter I believe. This does not input or output cat 5/6.

Q: 5. Can you change the antennas on the Pyro S 4K? and if it is possible that in some update it will be implemented?

A: The antennas on the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System are not permanently installed and are removeable. We are not aware of any updates to the antennas at this time.

Q: 6. To how many receivers and apps can the trasmitter transmit simultaneously. This is a question for Hollyland?

A: When the transmitter from the Hollyland Pyro S 4K HDMI/SDI Wireless Video Transmission System is set to broadcast mode, the a single transmitter can output to up to four receivers and two smart devices running the app.

Q: 7. Does it support 3D?

A: IOGEAR says: Than k you for choosing IOGEAR. The GW4K30GH60 does not support 3D . Once again thank you for choosing IOGEAR.

Q: 8. If i put the receiver in a cabinet will it still transmit to a tv 15 ft. Away? Or does it need to be line of site

A: For the DVDO Air 4K 2160p/30 HDMI Wireless Extender Kit (30'+) BH #DVAIR4K, it is made to be Line-of-Sight Connection. However even though this is what is listed at times I have found that they will still work between walls and cabinets. Unfortunately the only way to find out if it will work for you is to test it.

Q: 9. Hello, we need an hdmi over cat 6 splitter with poe with mixer, to mix 2 or more in hdmi signals to each one out signals, have you another model of this device with this option ?

A: No. The only well know systems that we carry are the A-Neuvideo line.

Q: 10. One user claims it does not work with extended view. Was this correct?

A: Yes, the MuxLab HDMI 1 x 2 Splitter BH #MUHDMI1X2SP is simply a splitter. A splitter will only mirror the same signal, it will not give you independent displays. To get independent displays, you need 2 separate video outputs on the computer.