Arri-Style 3/8"-16 Pin To 15Mm Rod Clamp

Arri-style 3/8"-16 Pin To 15mm Rod Clamp - Kondor Blue

Product Code: eq113014
Availability: In Stock

$74.97 $95.96

Qty

11 reviews Write a review

Description
Reviews (11)

Mount a single 15mm rod onto your camera cage with the raven black ARRI-Style 3/8"-16 Pin to 15mm Rod Clamp - Kondor Bluefrom Kondor Blue. The lightweight bracket enables you to attach a lens motor or another rod-based accessory to your camera rig without adding the weight of a baseplate and rod system. This aluminum alloy bracket requires a 3/8"-16 or 1/4"-20 bolt to secure its ARRI-style anti-twist mount.

Single 15mm Rod Bracket 3/8"-16 Anti-Twist Pins to 15mm Clamp Use for Lens Motor Gear or Accessory Requires 3/8"-16 or 1/4"-20 Bolt Mounts 15mm Rod without Baseplate System Thumb-Lever Rod Fastener Anodized Aluminum

Parameters
Compatible Rod Diameter	15 mm
Mounting	ARRI-Style Anti-Twist
Material of Construction	Aluminum Alloy
Dimensions	Not Specified by Manufacturer
Weight	Not Specified by Manufacturer
Packaging Info
Package Weight	0.1 lb
Box Dimensions (LxWxH)	6.75 x 3.85 x 1.2"

Related Questions and Answers

Q: 1. Is this compatible with the Kondor Blue 12" ARRI Lightweight Dovetail?

A: Yes, the Kondor Blue 15mm ARRI-Standard Baseplate for BMPCC 4K/6K Cage (Raven Black) is compatible with the Kondor Blue 12" ARRI Lightweight Dovetail.

Q: 2. What is the weight capacity of this mount?

A: The following unit will supports monitors up to 2.64 lb.

Q: 3. Under the plate, (center piece that connects to the bridge plate) is that a manfrotto plate that could be used for the RS2/3?

A: No, the connecting plate on the Kondor Blue Universal 15mm LWS Bridge Plate for ARRI/RED/URSA/C70/VENICE (Raven Black) is not a manfrotto style plate.

Q: 4. Is it compatible with ninja v?

A: Yes it is.

Q: 5. Is the ridge on top wide enough to go around a nato rail mount like on the PORTKEYS LEYE EVF?

A: No.

Q: 6. Can we get the dimensions of the product H X W X L? Thank you

A: The dimensions of the Kondor Blue Universal 15mm LWS Bridge Plate for ARRI/RED/URSA/C70/VENICE (Space Gray) are Dimensions 4.3 x 3.5 x 1.3" (10.9 x 8.9 x 3.3cm)

Q: 7. Can the 15mm rods work with a RED DSMC2 camera body? Appropriate height for 15mm rod mounted matte box and follow focus?

A: Yes, the Proaim 19/15mm Baseplate with ARRI-Style Dovetail follows LWS measurements to ensure proper placement of accessories being used for cinema cameras including RED DSMC2.

Q: 8. Is it the real universal mount for manfrotto plate? Can I put my own manfrotto plate onto it?

A: Yes, The Kondor Blue 15mm ARRI-Standard Baseplate for BMPCC 4K/6K Cage is compatible with Manfrotto 501 standard camera style plates.

Q: 9. Is this mount compatible with Portkey's bm5 III monitor?

A: Yes, this will be compatible.

Q: 10. It appears the mounting pins for the 1/4 20 male mounting screw are not removable? Any similar item to this to save me having to grind these pins off?

A: There does not seem to be another model of the Wooden Camera 1/4"-20 to 3/8"-16 ARRI-Style Accessory Adapter for SmallHD Monitors without twist pins. A possible alternate: CAMVATE 3/8"-16 ARRI-Style Anti-Twist Adapter BH #CAC3351

Quinton	27/09/2024
[0.1 lb] I'm using this to add a left-handle to my zacuto baseplate. It slips a little bit but I blame Zacuto for not having a rosette on the left side of the baseplate, not smallrig's fault. 5

Kevin	27/09/2024
[0.1 lb] they feel solid and look good. I'm pleased. 5

David	06/09/2024
[15 mm] Nice affordable clamp. Used with the SmallRig wooden handgrip 5

Jason	26/08/2024
[0.1 lb] This fits perfect on my rail set up with my Raptor. I use an handgrip with with arri style rosettes on the back. Nice rig. 5

Randy M.	09/07/2024
[0.1 lb] I use this on the 15mm rods coming out of my Wooden Camera baseplate for my BMPC 4K. When I need to shoulder mount my rig, this allows me to get my handle out where I want it under my lens and gets the balance where I want it quickly and easily by sliding it back and forth. Small enough to be out of the way and strong enough to hold the weight of my rig. So stoked on Wooden Camera's gear! 5

Chris	07/07/2024
[15 mm] This was a solution to reuse other handles. It’s narrow which is good if that’s what you need. Good to have in the kit 5

Craig	28/06/2024
[Aluminum Alloy] I just ordered this and haven't even tried them yet .. but ... I've been wanting EXACTLY THIS PRODUCT for the longest time and I'm so excited that someone has FINALLY designed them!! 5

Mauricio	13/06/2024
[15 mm] It's funny to write a review for such a simple piece of gear. Bottom line is that it tights very well, both to the rods and to the rosetta gear, it's easy to add or remove from a rig, and seems durable. 5

Brett	07/06/2024
[Aluminum Alloy] This is well made adapter. It makes for a versitle way to mount any handle with a rosette. 5

Mauricio	01/06/2024
[Aluminum Alloy] It works very well. It’s very tight once it is secured. it feels very well-built. I wish that in addition to the 90 degree rosette they’d also sell a piece where the rosette faces the direction of the rod. 5