The ProLights EclPanel TWCXL RGB LED Panelfrom ProLights EclPanel TWCXL RGB LED Panelis an ultrabright LED soft light that provides an outstanding source of powerful lighting. The EclPanel TWCXL comes with a full range of white tones from daylight to tungsten, attaining a superior light quality with high CRI, TLCI, and TM-30 values.

The EclPanel TWCXL allows for quick and accurate local control through 4 rotatory knobs with three fully-featured modes: CCT with +/- green shift, HSI for total control of hue, saturation, and intensity, and FX mode to access the pixel cinema effects. Each of the 48 sections has individual control to play the customizable cinema effects or by pixel mapping from an external controller. The unit has an onboard driver, a built-in power supply, a wireless transceiver for remote DMX and RDM control, and network connectivity (Art-Net, sACN).

For Large-Scale Film & TV Productions    Power: 2442 Lux at 16', 109° Beam Angle    1800 to 20,000K CCT    RGBW Mode for Full Color Control    Measures 64.49 x 33.94' x 5.67''    100 to 240 VAC or Battery Power    Dims 0 to 100%    Custom Cinema Effects or Pixel Mapping

• 500W RGB plus warm white LED source
• CR: 93, R9: 95, TLCI: 93
• 48-section pixel control and built-in lighting effects for cinema applications and color gel matching
• Silent operation with multiple fan modes
• Wireless DMX and RDM for wireless control and communication, plus Ethernet connectivity

Related Questions and Answers

Q: 1. What type of diffusion does the softbox have? What is the f/stop of the diffusion?

A: The amaran P60c RGB LED Light Panel comes with the soft-box that has 1 stop diffusion.

Q: 2. Will this light work with only 1 NPF battery inserted?

A: The amaran P60c RGBWW LED Panel needs two batteries to run.

Q: 3. What kind of cable extension can I buy to have a greater length between the ballast and the light?

A: The Nanlite PavoSlim 120C RGB LED Panel does not have an extension cable at the moment to run for a longer distance between the ballast and the panel.

Q: 4. No, I meant how do you physically control the light? Is it there just a snap grid that is offered, or are there barn doors?

A: To physically control the Nanlite PavoSlim 120C RGB LED Panel there are knobs on the controller, pictured at this link https://bhpho.to/3Gyw3li. There are no barndoors made for this light. The light does come with modifiers that include, Lite Diffuser, Standard Diffuser, Eggcrate and Softbox.

Q: 5. Can this light be mounted to a truss?

A: Sure, with proper clamps and safety cables, the Nanlite PavoSlim 120C RGB LED Panel (BH #NAPS120C) can be truss mounted.

Q: 6. Is this the type of light system that used for stage lighting?

A: No, these lights are not appropriate for stage lighting.

Q: 7. Is there any softboxes that works with the 1200d?

A: You can use this one. https://bhpho.to/3hqU8PS

Q: 8. What is the power output on this lights?

A: The Nanlite PavoSlim 120C RGB LED Panel BH #NAPS120C is rated for 12,830 LUX at 1 meter.

Q: 9. How do I set the start DMX channel? It seems to default to channel 1 as the start with no way to change to another number. I tried the app also but no DMX settings in there. (I have several of these I purchased from you but the manual doesn't say and I cannot find the information online!). Thank You!

A: This is a copy of the manual. If you have any other concerns please contact Savage directly. DMX Operation Connect the DMX output to the Savage RGB Pro Panel and turn the panel on. The panel should automatically detect the controller and switch to DMX mode. The panel display will say: “DMX 512 with RGB..” Below the readout, the channel information will display. Channel 1: Center Channel 2: Red Channel 3: Green Channel 4: Blue The DMX512 will default to channel one, but four channels are supported. Set channel one to any number above zero (we recommend the 50% position). The panel’s functions supported in DMX mode are RGB, hue/saturation/intensity and CCT. Red, green and blue can now be controlled individually. To change modes. Press the “Menu/Intensity” button one time. The menu will display the following: DMX 1/SW 2/R 3/G 4/B 1/SW 2/I 3/S 4/H 1/SW 2/BRI 3/CCT The number before each letter is the channel number for the selected function. The first line is the RGB mode and when selected will allow the user to make red, green and blue adjustments. The second line allows the user to adjust the intensity, saturation and hue of the selected color. The third line allows the user to switch to CCT mode. To change modes, rotate the “Menu/Intensity” clockwise until the desired mode is highlighted. Press the “Intensity/Menu” button again and the light will switch to the selected mode and be controllable with the DMX contro

Q: 10. Can these lights be powered on and off by the power source alone? Or do you need to physically turn them on each time? If I mount them to an overhead grid can I power them with a light switch?

A: You may set the Nanlite PavoSlim 120C RGB LED Panel on a TRUSS and control them via DMX or CRMX all at the same time as well as Nnlink app. The Nanlite PavoSlim 120C RGB LED Panel has a wired option to be plugged into power outlet or being powered by V-mount battery.