The black Imperio Sub210 Subwoofer from Avante is a versatile and powerful dual-driver sub designed with flexible controls and physical configurations for a variety of venues or situations, whether ground-stacked or flown. Featuring a powerful 1400W max Class-D amplifier, dexterous I/O, and integrated rigging for a modular setup, the Sub210 can handle everything from small to large stages through the addition of further Imperio speakers or Sub210s.

The Sub210 sports balanced XLR I/O, locking powerCON connectors for power input or speaker linking, selectable crossover frequencies and output modes as well as a robust cabinet constructed from plywood and a steel mesh grille. Whether stacking multiple Sub210s and Imperio speakers vertically, horizontally, or overhead, the Imperio Sub210 is an ideal core unit for any size PA system.

700W RMS Class-D Amplifier Module    Two 10" Woofers with 2.5" Voice Coils    Switching Power Design    LED Power/Signal/Clip Indicator    3-Pin XLR In & Out, powerCON In & Out    Phase Selection and Selectable X-Over    Integrated Rigging and Pole Socket    Overhead Rigging with Optional Flybar

The Imperio Sub210 is a powerhouse of low-frequency projection, capable of delivering serious output power, high volume, and sporting a range of features to get the most out of your amplification system.

• 700W RMS Class-D amplifier, 1400W max
• Two 10" woofers with 2.5" voice coils
• Plywood and steel cabinet with 6th order bandpass design for potent projection 
• Phase switchable between 0 and 180°
• Internal selectable crossover at 90 or 120 Hz
• Built-in peak limiter circuitry to protect your speakers

The Sub210 is designed to be the core of a larger PA system, which is modular in design, allowing you to add onto your Sub210 in nearly any manner you see fit. Whether you use the subwoofer on its own, pair it with more Sub210s, or create a nearly endlessly expandable line array with Imperio speakers, the Sub210 can handle practically any stage or venue size with the appropriate accessories.

• Integrated rigging for stacking Sub210s vertically or horizontally (link pins required for vertical stacks)
• M20 pole socket on side and top for mounting line array speakers
• XLR balanced, line-level audio input and output
• powerCON locking inputs and outputs for linking satellite speakers
• Flyable mounting of Sub210 and satellites with optional flybar

Related Questions and Answers

Q: 1. Will this work with my Pioneer component audio amplifier ? In case it matters, I also have a Marantz media player. Thanks, Roger

A: As other said, Yes. It should work with any RCA Preamp connection.

Q: 2. Will this work with the Yamaha A-S501 amp?

A: Yes the Yamaha A-S501 amplifier has a subwoofer output for direct compatibility with the Yamaha NS-SW100 subwoofer.

Q: 3. can this subwoofer be used with the yamaha stage pas 600i?

A: No it cannot be used with Yamaha PA equipment.

Q: 4. Yamaha NS-SW100 - what are the dimensions?

A: The Yamaha NS-SW100 10" 100W Subwoofer (Black) BH #YANSSW100BL is 13.8 x 13.9 x 16.1".

Q: 5. why these speaker only have audio inputs and no outputs? should get a split connector to reach both speakers? Avante Audio Achromic AS8 1000W Column PA System

A: In addition to its audio inputs, the Avante Audio Achromic AS8 1000W Column PA System also features an XLR 3-Pin Male Balanced/Unbalanced Line Output connection for sending signal to externally connected speakers.

Q: 6. Is yamaha ns-sw100w subwoofer compatible with sony receiver str-dh790 receiver consideratingf impedance thrshold aspect?

A: Yes, the Yamaha NS-SW100 10" 100W Subwoofer (Black), B&H # YANSSW100BL, would be compatible with the Sony STR-DH790 7.2-Channel A/V Receiver (B&H # SOSTRDH790) as long as it is not turned up to maximum volume. This receiver has a considerably higher power output than what this subwoofer is designed to handle.

Q: 7. Will this pair with the arc and pair of Sonos surround sound speakers?

A: Yes the Sonos Sub Mini Wireless Subwoofer will pair with the arc and a pair of Sonos surround speakers.

Q: 8. Will this SS7746 pole work with the Electro Voice EKX15SP sub and EKX12P tops? I want to make sure that it won't wiggle or wobble. Thank you.

A: I'm not familiar with those tops. However, I do use them with speakers up to 100 pounds each, and they do not wobble.

Q: 9. Does this subwoofer have feet? If so, what are the dimensions? (I want to know if it will fit on my Auray ISO-SUB Subwoofer Isolation Stabilizer) Thanks in advance!

A: Yes the Yamaha NS-SW100 has feet. Yes the Yamaha NS-SW100 will fit onto the Auray ISO-SUB Subwoofer Isolation Stabilizer.

Q: 10. Will this work with a soundbar? Looking to replace the subwoofer for my Soundblaster Katana X

A: If your soundbar uses a standard RCA style LFE connection this will work.