Mount a LED light or monitor onto a compatible stand using this CAMVATE Adjustable Ball Head 1/4"-20 to 5/8"-27 Thread Supportfrom CAMVATE. The ball head features a 1/4"-20 screw at the top to attach an accessory of your choice up to 3.3 lb. Once secured, you can rotate the head 360° and tilt 90° to get the perfect viewing angle or lighting effect. The bottom of the head has a 5/8"-27 thread for attachment to compatible stands. Keeping the mount in place is as easy as adjusting the integrated thumbscrew.

1/4"-20 Screw at the Top    5/8"-27 Thread at the Bottom    3.3 lb Load Capacity    Rotates 360°, Tilts 90°

Related Questions and Answers

Q: 1. Does this convert to a Monopod? Can it handle Nikkor D750 with 200_500 lens?

A: I don't think it will convert to a monopod.A long lens could work on a 200 to 500 depending on where the mount bracket is. I have a Tokina 150- 500 that I use on a monopod most of the time for sports action it has the mount in the middle and is well balanced

Q: 2. Does the TY-50E Quick Release Plate have a 1/4 X 20 threaded hole to facilitate attachment of my hand strap to the plate, when the plate is attached to the camera?

A: The Sirui TY-LP40 and TY-LP70 plates have a threaded 1/4 x 20 hole to attach your hand strap. The TY-50E has a slot that you can put a strap through

Q: 3. Does this come with extra plates and a phone holder like the same product on Amazon?

A: Yes the SmallRig CT-20 comes with 2 QR plates and a smartphone holder. When shopping our site you can always see what is included with an item by viewing the overview tab and finding the “In the Box” listing located on the right hand side of our web page.

Q: 4. Is the QR plate an Arca Swiss type?

A: Yes.

Q: 5. How will it hold a Canon 6D with a sigma 150-500 mm lens?

A: Can't speak to that specific model but the lbs rating lives up to whatever you can throw at it. This tripod has heavy duty construction amd is very stable. You'll be hard pressed to find a better value or a more compact tripod with this weight rating. I had to tighten down the leg supports after a couple uses with heavy gear but i haven't had slipage since. Again, you won't go wrong here.

Q: 6. Is this tripod capable of aiming the camera straight down?

A: Absolutely! Camera remains secure and steady. Great lightweight tripod for most assignments.

Q: 7. I'm planning on using it with Gimbal head and D7200 with 150-600 mm Sigma Sport lens?

A: If your inquiry is may the Sirui ET-2004 Aluminum Tripod with E-20 Ball Head be used with a gimbal head and your Nikon D7200/Sigma 150-600mm lens combination, then the answer is yes. The combined weight of the Nikon D7200 DSLR camera and the Sigma 150-600mm f/5-6.3 DG OS HSM Sports Lens for Nikon is 7.79 lbs (3.53 kg), and the Sirui ET-2004 Aluminum Tripod with E-20 Ball Head has a maximum load capacity of 26.5 lb (12 kg).

Q: 8. Is this compatible with any arca plate or Fuji arca grip plate? Or do you have to use their arca plates only?

A: Since the Sirui KS-20 Low Gravity QR Ball Head uses a lever to tighten the plate onto the clamp, the plate needs to be exact in order to offer a perfect connection. Any small change in the size or angle of the lip of the plate may not allow the plate to be held perfectly onto the clamp. Therefore, we recommend only using the Sirui plate that comes with the head or a Sirui plate made specifically for this head in order for the plate to be 100% secure onto the clamp.

Q: 9. Will a RRS BH55 ball head work with this tripod?

A: Yes, the RRS BH55 ball head will work with the Sirui R-2204 carbon fiber tripod. Due to the BH55's large base diameter, it will likely cause the R2204's reverse-fold mechanism to close slightly wider.

Q: 10. B&H indicated that the BH-20 ball head will support 55 lbs but other distributors indicate that it will only support 22 lbs. Which is correct? I could not get an answer from the manufacturer.

A: According to the manufacturer's spec sheet the maximum load for this head is 25 Kilograms which is 55 lbs.