Mount your camera on this CAMVATE Quick Release ARRI Dovetail Baseplate 19mm Studio Rodsfrom CAMVATE Quick Release ARRI Dovetail Baseplate 19mm Studio Rodsto incorporate it into 19mm studio standard configurations. The ARRI standard dovetail plate features both a 1/4"-20 and 3/8"-16 screw to secure your camera to the baseplate and can be dismounted by engaging the quick release lever.

Either side of the plate has a 19mm rod clamp with 360° wingnuts to secure the included 11.8" rods. You can then freely adjust the plate along the length of the rods for optimal placement. The 1/4"-20 mounting threads at the front and back of the plate can incorporate lens support and battery plate accessories into the configuration to better power or reduce strain on your camera.

ARRI Standard Dovetail Baseplate    1/4"-20 and 3/8"-16 Camera Screws    19mm Studio Standard Rod Clamps    Multiple 1/4"-20 Threads    Includes Two 11.8" 19mm Rods    Quick Release Lever, 360° Wingnuts

Related Questions and Answers

Q: 1. Is it possible to purchase Finger-tightened rod mounting screw from this handgrip separately?

A: The thumbscrew for the Tilta Quick Release Handgrip Bridge is not available separately. Tilta may be able to provide a replacement if you contact them directly.

Q: 2. Can the 15mm rods work with a RED DSMC2 camera body? Appropriate height for 15mm rod mounted matte box and follow focus?

A: Yes, the Proaim 19/15mm Baseplate with ARRI-Style Dovetail follows LWS measurements to ensure proper placement of accessories being used for cinema cameras including RED DSMC2.

Q: 3. Will this lens support screw line up with and fit with the Sony FE 4/PZ 28-135 G OSS lens support cuff?

A: The lens support on the Tilta Quick Release Baseplate for Sony FX6 is not meant to match any particular lenses support foot, but to offer support to any lens attached to the system.

Q: 4. how does the base plate attach to tripod?

A: There are 1 x 3/8"-16 and 3 x 1/4"-20 threads at the bottom to allow for tripod mounting.

Q: 5. Will the Tilta Extension Arms fit on this bridge?

A: The interface for the bridge and the arms are the world standard ARRI rosette. Therefore, yes, the arms will fit on this bridge.

Q: 6. If I use this with a Canon T5i DSLR and the iKan ring light, will it place the camera at the right height to be in the centre of the ring light?

A: Yes, with this combination, the light can be correctly centered.

Q: 7. Can this be used with the Lumix S5 Cage?

A: Yes, you can use any cage that has a 1/4"-20 and/or 3/8"-16 thread with the 8Sinn 15mm Baseplate + Riser Plate I.

Q: 8. how can i use tilta nucleus M with this handgrip bridge?

A: You would use the ARRI Rosette Adapters that come in the box with BH #TINUCLEUSM.

Q: 9. Can I use this handgrip bridge with this rail system o already have? https://www.bhphotovideo.com/c/product/993996-REG

A: As long as you can get the 15mm rods to line up properly and if your plan is to add ARRI rosette function to your rig, then it will work.

Q: 10. Will this allow me to use an arca swiss base with this https://www.bhphotovideo.com/c/product/554099-REG/Manfrotto_393_393_Heavy_Duty_Gimbal.html ?

A: The Niceyrig Quick Release Drop-In Baseplate (Arca-Type to Manfrotto Dovetail) will allow the use of an Arca Swiss plate on the Manfrotto Heavy Telephoto Lens Support with Quick Release Adapter and Plate.