The Ikelite 200DLM/B Underwater Housing for OM System OM-1 Camerasallows the use of the Olympus OM System OM-1 mirrorless micro four-thirds camera in or around the water for scuba, snorkeling, surfing, the pool, or any adventure.

Large, curved control levers put the most important controls right where you need them: shutter and autofocus (via the AEL/AFL button). This combination allows you to shoot with or without back button focus, an advanced technique that is useful for tack sharp focus of super macro and fast-moving subjects. Each lever can be extended using the optional Shutter Trigger Extension #4077.95 for perfect spacing when using a right-hand handle.

All rotating controls are operated intuitively via premium soft-touch knobs. Stainless steel, direct-drive rotating controls are virtually fail-safe and user-serviceable, and adjustable in a pinch. Camera buttons are accessible by smooth-action, hard anodized aluminum push buttons for reliable performance and easy maintenance. These controls are clearly labeled by laser engraving on the back of the housing that never fades or falls off. Two 1/4"-20 threaded mounting points are included on the bottom of the housing for the simple, rotation-free attachment of a tray and handle system.

The camera mount is front-loading for easy installation and removal. A small mounting plate attaches to the bottom of the camera and secures in the front of the housing. The camera mounting plate does not need to be removed from the camera for surface use or when changing the battery or memory cards. The mounting plate features a 1/4"-20 threaded mount on the bottom so that it can be attached to a tripod on the surface.

The unique rear seal design prevents accidental twisting or stretching of the O-ring for simple and confident assembly. Ikelite has eliminated the need for an O-ring groove or channel which can trap sand, dirt, or debris. Two double-passivated stainless steel locking lid snaps are simple to use and virtually unbreakable. The clear back allows you to see the O-ring form a solid, watertight seal as it closes.

A spare 1/2"-20 threaded accessory port is provided on the side of the housing for easy installation of the optional Vacuum Kit #47012. A vacuum kit allows you to draw a vacuum on the housing to check for leaks prior to entering the water. Drawing a vacuum on the system also provides extra security at the surface of the water, especially important when using the housing in rough surf.

The camera's large, super-bright LCD screen is viewable edge-to-edge through the back of the housing. An included optical Supereye viewfinder window blocks ambient light to improve the viewing of the camera's electronic viewfinder (EVF) for both image composition and review. The Supereye removes quickly and easily for the attachment of the optional Straight Enhanced Magnified Viewfinder #6890.2 or 45° Magnified Viewfinder (Type 3) #6891.3.

For the best results, Ikelite recommends adding an external flash or high-powered constant-on light if you'll be diving regularly below 15'. You can enjoy TTL exposure by adding the optional DL3 DS Link TTL Converter and Hotshoe Kit #46032 and a compatible Ikelite DS strobe. Rear curtain flash synchronization is supported. Exposure compensation can be used added or subtracted in the camera. Reliable locking connectors between the hot shoe and bulkhead make it easy to install the TTL hot shoe or carry backup parts when traveling to remote locations.This camera does not feature a built-in flash for the triggering of fiber optic strobes.A bright constant-on video light can be used instead of or in addition to a flash. A constant-on light is not as bright as a strobe flash. Constant-on lights do provide added versatility because they can be used for focus assist and for improved colors when shooting video.

It couldn't be more simple to change ports—just press the port on and tighten three thumb screws. This housing accepts ports from Ikelite's DLM Port System to accommodate a selection of zoom, macro, and wide-angle lenses for underwater use.

Ikelite's white ABS-PC blend housing provides strength and corrosion-free performance with minimal maintenance. ABS-PC is lighter than aluminum for convenience during travel and less drag underwater. The specially formulated color deflects the sun to keep your camera running cooler and longer. Compared to black or clear housings, the light color provides superior contrast for an enhanced view of the camera, LCD screen, and O-ring seal.

Ikelite products are designed, built, and tested in the U.S.A., using locally sourced, top-grade materials. Every unit is water pressure tested to 200'.

Related Questions and Answers

Q: 1. What does the HLD-10 weigh, with or without the battery?

A: The OM SYSTEM HLD-10 Power Battery Holder weighs approximately 8.4 oz / 242 g without the battery and terminal cover. The battery would add roughly 2.9 oz / 81 g.

Q: 2. Is it works with new rx100 M7?

A: Yes.

Q: 3. What are the physical dimensions of the HLD-10?

A: The dimensions of the OM SYSTEM HLD-10 Power Battery Holder are 5.3 x 2.9 x 2.7".

Q: 4. Is this housing also compatible with the Sony A6000 camera. You mention the series but not this specific model of the series.

A: The Ikelite 200DLM/A Underwater Housing for Sony Alpha A6300, A6400, A6500 Mirrorless Camera, BH #IK6911.64. is incompatible with the Sony Alpha a6000 Mirrorless Digital Camera. Instead, get the Ikelite 200DLM/A Underwater Housing for Sony Alpha a6000 Mirrorless Camera, BH #IKUWHSAA600.

Q: 5. Is the arca plate on the bottom of this cage compatible with the Peak Design tripod?

A: Yes, if your Peak Design tripod has an "arca-type or arca-compatible" quick release, it will be able to support the Smallrig Half Camera Cage for OM SYSTEM OM-1

Q: 6. Will this work with the mk ii?

A: Yes, the SmallRig Half Camera Cage for OM SYSTEM OM-1 supports the following camera models: the OM-D E-M1 Mark II, the OM-1, and the OM-D E-M1 Mark III.

Q: 7. Can you do wide angle shots at 24mm without vignetting?

A: The Ikelite Underwater Housing for Sony Cyber-shot RX100 Mark VI is made for that camera. It has a 1" sensor with a 9 to 72mm lens and the housing is designed to accommodate that lens even a 9mm. (The Full Frame sensor Equivalent Focal Length: 24 to 200mm)

Q: 8. If both the HLD-10 and the camera body have batteries that need charging, do you need to charge them independently, or will plugging the charge cable into one input (body or HLD-10) charge both batteries (without moving the cable)?

A: If both the batteries need charging, you don't have to charge them independently. Plugging the charge cable into one input (OM-1 Mirrorless Camera or OM SYSTEM HLD-10 Power Battery Holder BH #OMHLD10) will charge both batteries (without moving the cable).

Q: 9. Does the battery in the grip have to be removed before the camera switches over to using the internal battery? I have long periods that I cannot move my camera even enough to remove the battery.

A: No, the battery does not need to be removed from the OM SYSTEM HLD-10 Power Battery Holder in order for the camera to use the internal battery.

Q: 10. Does this work with the RX100 shooting grip attached?

A: No, it will not. Any additional camera grips would have to be removed before inserting the Sony Cyber-shot DSC-RX100 VI Digital Camera inside the Ikelite Underwater Housing for Sony Cyber-shot RX100 Mark VI. There is not enough clearance to use a grip with the Sony Cyber-shot DSC-RX100 VI Digital Camera, and attempting to use one would prevent the housing from closing properly for underwater usage and may prevent the buttons on the housing from properly aligning with the buttons on the camera.