This FotodioX WonderPana FreeArc XL ND16 + 0.9 Soft-Edge Kitfrom FotodioX WonderPana FreeArc XL ND16 + 0.9 Soft-Edge Kitincludes a WonderPana FreeArc XL Core Unit designed to specifically fit the Sony FE 12-24mm f/2.8 GM lens, as well as a WonderPana 8" Holder Bracket. Those items can be combined to allow for the convenient use of two 2mm thick filters measuring 7.9" wide, or one 2mm thick filter measuring 7.9" wide along with one FotodioX 186mm round filter behind it.

The WonderPana FreeArc XL Core Unit consists of two components, a front filter holder and a rear lens collar. Placement of this FreeArc XL Core Unit onto a Sony FE 12-24mm f/2.8 GM lens is easily accomplished by sliding the rear lens collar over the rear of the lens until it has achieved a secure fit. Afterward, the front filter holder can be screwed onto the front of the installed rear lens collar.

To use the WonderPana 8" Holder Bracket with the Sony FE 12-24mm f/2.8 GM lens, pre-tapped threaded inserts along the edge of the front filter holder accommodate six of that holder bracket's eight included brass short-screws. Those screws ensure that a WonderPana 8" Holder Bracket's two assembly pieces are positioned parallel to each other and can hold a 7.9" wide filter between them. Once the holder bracket and the front filter holder are combined and the separate collar has been slid over the rear of a Sony FE 12-24mm f/2.8 GM lens, the front filter holder with attached holder bracket can be screwed onto the installed rear lens collar.

After being fitted onto a Sony FE 12-24mm f/2.8 GM lens, the bearing design of this WonderPana FreeArc XL Core Unit allows a WonderPana 8" Holder Bracket to rotate 360°. This permits the use of graduated neutral density and other filters enhanced by varied positioning.

The FotodioX WonderPana 8" Holder Bracket provides two pairs of filter slots, a configuration that accommodates two compatible rectangular filters. For each rectangular filter placed within one of the holder bracket's slots, its position is secured by integrated guides within each slot. These guides apply pressure along both sides of a filter that is sufficient to hold it in place but permits movement of that filter. This can complement the use of graduated filters whose effect can be adjusted to better suit changing lighting conditions or creative demands by sliding them up or down within a filter slot.

This FotodioX WonderPana FreeArc XL Core Unit includes front filter threads, which allow a FotodioX 186mm round filter to be used along with the holder bracket. If a 186mm round filter is used on the attached WonderPana FreeArc XL Core Unit, the rectangular filter slot closest to the rear of the holder bracket becomes unavailable. The WonderPana 8" Holder Bracket features a durable and lightweight aluminum alloy construction with a corrosion-resistant, black-anodized finish.

The FotodioX 186mm Center-Pinch Snap-On Lens Cap for select WonderPana systems and filters is a 186mm front lens cap with a squeeze, spring, and snap-on mechanism. It is easy to install as well as remove and can attach to a WonderPana FreeArc XL filter holder system to protect the front element of a lens that any one of those systems is mounted on. Additionally, this lens cap can be used to protect a non-ultraslim FotodioX WonderPana 186mm filter mounted on a FotodioX WonderPana FreeArc XL filter holder system, with no other filter placed in front of it. Lens caps protect your lens or filter from scratches, fingerprints, and the elements when the lens or filter is not in use.

For Sony FE 12-24mm f/2.8 GM Lens    WonderPana FreeArc XL Core Unit    Holds 7.9" Wide & 2mm Thick Filters    ND16: 16x Filter Factor, +4-Stop    0.9 Soft-Edge Graduated ND    WonderPana 8.0" Holder Bracket    Bracket Rotates 360° with FreeArc XL    186mm Center-Pinch Snap-On Lens Cap

Related Questions and Answers

Q: 1. Does this come with a mains power adapter?

A: Yes, It has mains lead/adapter in the box.

Q: 2. To get the most out of the battery life during a 2+ hour shoot of multiple testimonials, should I turn it down between subjects or turn it off?

A: It would be best to turn the C-700RSV off between subjects to conserve battery life.

Q: 3. Is a barn door kit available for this instrument?

A: No, there are no barn-doors made for that model.

Q: 4. What is the Illuminance in lux? Many of these lights don't provide this information.

A: The intensity at 1m is: 3200k - 195lx 5600k - 230lx

Q: 5. What's the weight of the light with batteries when you're holding it? Thanks!

A: The weight of the FotodioX Pro FlapJack LED Wand C-308AS Bi-Color Edge Light is 6.94 lbs, while the weight of the NP-F740 batteries together would be approximately 0.9 lbs. As such, the weight of the FotodioX Pro FlapJack LED Wand with the batteries would be approximately 7.94 lbs.

Q: 6. I know this product include battery, Can you ship it to Hong Kong?

A: As of today, this item can be shipped to Hong Kong.

Q: 7. Is there a compatible grid/softbox accessory to narrow the beam angle to limit spill?

A: Unfortunately, there are no compatible grids or softboxes for this particular LED light.

Q: 8. Whats is the max lumen output at full setting?

A: Unfortunately, the manufacturer only lists this light in terms of lux rating which is 865 lux at 5600K at 1m and 780 lux at 3200K at 1m.

Q: 9. Can I use it by v-mount battery?

A: Yes, it can be powered by V Mount or battery packs that come with the purchase.

Q: 10. Would it make sense to buy two of these? One for your key and the other for the fill? Or possible to flood the scene a bit with soft light?

A: I would start with one and depending on what youre shooting you can always add a second if required