Light your scene with the compact Smith-Victor Spectrum 2.0 RGB Bi-Color LED Light 2-Packfrom Smith-Victor. The light features 166 LEDs that provide a mix of tungsten, daylight, and RGB colors that enable the fixture's output to vary between tungsten and daylight as well as produce up to 360 colors.

The control knobs on the back allow you to control the light's dimming from 10 to 100%, the color temperature from 3200 to 5700K, and it also allows you to control the RGB color output. It measures a bright 550 lux, equivalent to a 120W tungsten light, and has a CRI rating of 97, indicating highly accurate color rendering.

You can power the fixture via the included L-series battery, and a micro-USB charger is included to power the battery while installed on the light. On the bottom of the light is a 1/4"-20 threaded mounting hole that allows you to mount it onto the included tilting shoe adapter or handle, or optional mounts like a tripod.

3200 to 5700K Variable Color Output    360 Different RGB Colors Available    On-Camera or Stand Mounting, CRI 97    Dimmable from 10 to 100% Brightness    Powers with 1 x Sony L-Series Battery    Control Knobs, LED Screen, USB Charger    1/4"-20 Thread and Shoe Mount

The output can be dimmed from 100 to 10%

550 lux and CRI of 97

166 LEDs provide a 3200 to 5700K color temperature and 360 RGB colors

Powers with one included L-series battery

Battery charges while mounted using the micro-USB port and the included charger

Mounts onto camera shoe or 1/4"-20 mount

Related Questions and Answers

Q: 1. Does this flash or does it provide continuous light or both?

A: The Smith-Victor Orbit Pro Series Bi-Color LED 10" Ring Light is a continuous light only.

Q: 2. Will an 82mm lens fit with this ring light? I've been told "yes" with 2 other ring lights so far and that was wrong info.

A: The opening for the lens on the Smith-Victor Orbit Pro Series Bi-Color LED Ring Light is 129mm so it will easily allow a lens with an 82mm diameter to be used.

Q: 3. What parts are needed to adapt this unit's rail system to a Manfrotto PL200 q.c. socket?

A: Since the rail mount has a female 3/8-16” thread and your Manfrotto 200PL plate has a 1/4-20” male thread, you would need a Oben 3/8"-16 to 1/4"-20 Reducer Bushing B&H # OB1039 to reduce the thread size on the rail mount to hold the Manfrotto plate. https://bhpho.to/2KJTdu6

Q: 4. Do I need to attach both batteries to use the light or can I just use a single dummy battery connected to a v-mount battery?

A: You can operate the Smith-Victor Orbit Pro Series Bi-Color LED Ring Light using the included batteries, or by plugging the power cord into an AC wall outlet.

Q: 5. Can I use it d-tap to L-series dummy battery ?

A: Yes, that is possible. This light can be powered by Sony L style batteries. The IndiPRO Tools Coiled D-Tap to Sony L-Series Dummy Battery Cable, B&H # INCPTSLS, should work with this light. https://bhpho.to/2ZdOR1J

Q: 6. Can this be attached directly to the lens without using the sliding bracket?

A: Smith-Victor Orbit Pro Series Bi-Color LED Ring Light with Battery Bundle (10") can only be connecetd to your camera and lens through the bracket. There are no threads or adapter rings to connect the lens directly on the ring ligh.

Q: 7. Can the light attach to a tripod and camera at the same time?

A: Yes It can. There is a 1/4-20 thread at the bottom of the block that holds the camera.

Q: 8. How does the DMX function work? Is there an assigned DMX address?

A: The DMX function can be assigned as two channels: one for dimming and one for color.

Q: 9. Is this light suitable for content creation? (Ex. Youtube, Twitch, Facebook)

A: This light is very much so suitable for this type of application.

Q: 10. I understand this light requires a DC power supply of 9V 3A, but most lights accept a wider range or “tolerance” of a few more Volts. Can I use a 12V power supply on this?

A: Unfortunately the manufacturer has only stated that it requires 9V 3A, and can't recommend using a higher voltage AC adapter as it may damage the unit.