The gray West Penn 293 18 AWG 2-Conductor Shielded Cable 500' Grayfrom West Penn 293 18 AWG 2-Conductor Shielded Cable 500' Grayhas a length of 500'. It also does not have connectors on either end.

18 AWG | 2 Conductors    Shielded    500' Length

Related Questions and Answers

Q: 1. does this work with Nikon 80-200 f2.8 push/pull lens mounted on D7100 body?

A: well i dont know that lens but it worked fine with my canon 100-400mm push\pull lens

Q: 2. is it working with sigma 14mm f1.8 attached with MC-11 AT Mefoto roadtrip tripod?

A: This is a universal fitting mount with an adjustable sliding color. The Sigma 14mm should fit in if you slide the support to the back.

Q: 3. How does this attach to a tripod? Do it fit into the Really Right Stuff quick release clamps?

A: It features a 1/4 20 thread size to connect to tripod/monopod heads.

Q: 4. What is the shortest distance between the 1/4 inch threaded attachment to the front lens support?

A: There are 3 1/4 inch and 3 3/8 inch threaded attachment positions. The front lens support can be positioned directly over each of them. The front lens support is on a sliding arm that can be reversed to shorten the distance from the camera base.

Q: 5. Is it compatible with camcorders as well as SLR's?

A: Well, I didn't use it with camcorders. However, the general idea is to support the body and the lens in a manner not to cause much pressure on the mount. If that would help in recording then let it be! But I doubt controlling it would be much of an easy task. I don't know the size of camcorders, but the total expansion of this arm is somewhere around 40cm; would that be good for camcorders?

Q: 6. Will this work with the Fuji 80mm Macro? A rather heavy lens to be carried by the cameras’ mount

A: No, the lens is too small to use with this support. It is meant to be used with long telephoto lens, about 6.5" and longer.

Q: 7. Will it work with the Sony 55-210 on a Alpha a6300 body? Also, can I mount this piece on my Promaster Fluid head tripod?

A: Yes, this will fit your camera. You will need to thread this device into your previous existing head.

Q: 8. Does this work with the Nikon p900

A: Yes this will work with the Nikon P900.

Q: 9. Will this work with the Nikon AF-S 300mm, f/4D (ie, the older non VR version)?

A: Yes, this is compatible with the Nikon Nikon AF-S 300mm, f/4D lens.

Q: 10. Will this work with my Sony RX10iv?

A: Yes and no. The RX10 Mk IV fits onto the RC2/200PL system easily, but because the barrel of the lens is smaller in diameter than the camera is tall, when parallel to the lens support, the lens support does not bear the weight of the lens at all. Using the 234 tilt head, you -could- tilt the head/camera downwards so that the lens is supported by the platform, but from testing here at the store, the lens does not exhibit significant downward weight/torque on the camera side, so it really shouldn't be necessary.