The Mackie 402VLZ4 4-Channel Ultra-Compact Mixer features Onyx microphone preamps in an ultra-compact design and is suitable for professional low-input applications. From every input to every output, the mixer is designed to provide the highest headroom and lowest noise possible for maximum signal integrity.

The mixer is built like a tank with a rugged solid-steel chassis and high-contrast controls for discernible tactile control. With features like instrument level inputs, phantom power, and level metering, the 402VLZ4 4-Channel Ultra-Compact Mixer is a good choice for anybody who is big on performance, but light on inputs. The bottom panel of the mixer features has three non-threaded holes that allow it to be fitted with an optional microphone stand adapter (sold separately). This lets you support the mixer on a standard microphone stand and adjust its height and level to whatever suits your preferences.

For Sound Reinforcement Applications    2 x Onyx Microphone Preamps    2 x XLR Microphone Inputs    2 x 1/4" Line Inputs    2 x RCA Tape Inputs and Outputs    2-Band EQ    48V Phantom Power    8-Segment Stereo LED Meters    1/4" Headphone Output

4-Channel mixer featuring high-headroom, low-noise design

2 Boutique-Quality Onyx Microphone Preamps:

Wide 60 dB gain range

128.5 dB dynamic range

+22 dBu line input handling

Extended frequency response

Distortion under 0.0007% (20 Hz to 50 kHz)

Improved RF rejection, suitable for broadcast applications

Phantom power for condenser microphones

4 high-headroom line inputs

Selectable instrument inputs on first 2 channels; no DI box needed

2-band EQ (80 Hz and 12 kHz)

18 dB/octave 100 Hz low-cut filter on microphone input channels

High-resolution 8-segment stereo meters

Sealed rotary controls resist dust and grime

Built-like-a-tank rugged steel chassis with powder-coat finish

High-visibility, high-contrast controls deliver convenient at-a-glance visual feedback

Universal power supply for worldwide use

Applications: Live sound mixing, houses of worship, clubs, gymnasiums, banquet halls, conference rooms, boardrooms, studio and field recording, multimedia applications, broadcast, and many more

Related Questions and Answers

Q: 1. The spec says, "Power Supply External AC Connector: 2-Pin IEC 250 VAC". Does this mean this will work on 110V - 250V?

A: The Mackie 402VLZ4 4-Channel Ultra-Compact Mixer that we sell comes packaged with a power supply for use in North America. The included power supply is compatible for use with 100 to 120V only.

Q: 2. How do I use the effects on this board? OR do I need to purchase an FX processor?

A: This mixer has no on-board effects.

Q: 3. Can the INSERT jack be used as splitter by inserting to the first click?

A: The insert jack of the Mackie 802VLZ4 8-Channel Ultra-Compact Mixer (BH # MA802VLZ4) should not be used as a splitter function as described. There would be a good chance that noise would be introduced into the signal chain. Best to use a splitter cable: Mackie 802VLZ4 8-Channel Ultra-Compact Mixer (BH # MA802VLZ4): https://bhpho.to/4cOduHG

Q: 4. How does this get connected to the computer?

A: The Mackie 402 VLZ4 features no direct connection available to a computer. You would need an Audio interface which will convert the analog outputs of the mixer to digital or connect the mixer using a standard audio cable to the 1/8 input jack available on most computers.

Q: 5. Is it possible to have a mic channel only go through the aux without having any audio in the main mix? Think Talkback for aband.

A: No, it is not possible to assign a mic channel from the Mackie 802VLZ4 8-Channel Ultra-Compact Mixer to go only through the Aux Send and not the Main Mix.

Q: 6. I use wireless mics during video production. Is this a good mixer for that?

A: This mixer has good quality, clean sounding mic pre amp's, and would work fine for video production applications. In a situation where you have access to wall power, this would be a great mixer for two microphones.

Q: 7. Hi...Just received the mix5...small and nice but...how can I listen to only headphones without also having music coming out the speakers? there is a to headphones button but doesn't do anything...thanks

A: Hi Michael, I have yet to try this with the Mix8 but I will look at it tonight. Have you tried engaging the To Phones button and disengaging the To Mix button? I am guess you have since it seems to be the way it would be done if possible. Though looking at the location of the buttons I am now wondering if they send the RCA inputs to the phones or to Main since they are stacked next to the RCA connectors. I'll do some more looking and experimenting on the 8 and let you know. - Craig

Q: 8. What is the difference between LINE IN 3-4 and TAPE IN on Mackie 402VLZ4?

A: Tape in is just designed for playback and is routed directly to the output. Channel 3 and 4 is ballanced and will accept level signals.

Q: 9. Does anyone know of a a lockable cover that can go over this board to prevent unauthorized use?

A: Not aware of any available.

Q: 10. Where are the phantom power buttons for the XLR ins? Thx

A: The Phantom power button is placed directly above the headphone jack. This mixer has a single phantom power button, you cannot select a individual channel to provide power too, the power is share between all microphone inputs.