Azden Fmx-42U 4-Channel Microphone Field Mixer Kit

Azden Fmx-42u 4-channel Microphone Field Mixer Kit

Product Code: eq115530
Availability: In Stock

$1,980.00 $2,534.40

Qty

6 reviews Write a review

Description
Reviews (6)

The Azden FMX-42u 4-Channel Microphone Field Mixer Kitis a portable 4-channel audio mixer with built-in A/D conversion and audio output via mini-USB for connection to smartphones, tablets, and computers. It is designed for professional and semi-professional field audio capturing.

The FMX-42u also features 4 balanced 3-pin XLR microphone inputs with individually switched +48V phantom power. A pair of balanced XLR outputs provide line or mic level (switchable) signal to cameras, recorders, etc. Additional features include a switchable input limiter to reduce the possibility of overload distortion, Left/Center/Right pan switches on all input channels, and enhanced circuitry for improved signal-to-noise ratio. The FMX-42u can be powered either by 6 AA batteries or an optional 12 VDC external power supply. A ballistic nylon carrying case is included.

The FMX-42u is an affordable field mixing solution for event videos, ENG/EFP applications, documentaries, and more.

4 XLR Inputs Phantom Power Input Limiter 2 Balanced Mic/Line XLR Outputs Make Backup Recordings Using USB Output Record to Smartphone, Tablet & Computer Sound Bag with Sturdy Internal Frame Front and Back Pockets Includes Shoulder Straps

Input
Balanced Input	4 x XLR 3-pin female (CH 1, 2, 3 & 4)
Level	Line- Standard: +4 dBu (electronically balanced) Maximum: > +26 dBu Impedance: 20 kOhms MIC HI- Standard: -38 dBu (electronically balanced) Maximum: +4 dBu Impedance: 2 kOhms MIC LO- Standard: -58 dBu (electronically balanced) Maximum: -15 dBu Impedance: 2 kOhms
High Pass Filter	100 Hz - 6 dB/oct
Input Level	-20 to +19 dBu (unbalanced)
Impedance	11 kOhms
Return Input	No
Output
Balanced Output	2 x XLR 3-pin male (output L & R)
Unbalanced Outputs	1/8" / 3.5 mm stereo mini-jack
Monitor Output	1/4" / 6.3 mm stereo jack
Balanced Output Level	LINE- Standard: +4 dBu (electronically balanced, 5 kOhms load) Maximum: +20 dBu (electronically balanced, 5 kOhms load) Impedance: 600 ohms MIC- Standard: -36 dBu (electronically balanced, 5 kOhms load) Maximum: -20 dBu (electronically balanced, 5 kOhms load) Impedance: 600 ohms
Unbalanced Output Level	Standard: -36 dBu (electronically balanced, 2 kOhms load) Maximum: -20 dBu (electronically balanced, 2 kOhms load) Impedance: 120 ohms
Monitor Output	Max Output: +1 dBu (32 Ohm load at 9 V), 16 - 100 Ohm load recommended
Meters	Standard Output Level: 0 VU (+4 dBu)
Digital Output	Connector: USB mini-B (female) Interface Format: USB 2.0 full speed Audio Data Format: Isochronous data format Sampling Frequencies: 16 / 22.05 / 32 / 44.1 / 48 kHz compatible Bit Depth: 8 / 16-bit compatible Channels: 2 Device Name: USB AUDIO CODEC
General
Frequency Response	Balanced or Unbalanced Output: 20 Hz - 30 kHz (+0/-1.5 dB) Monitor Output: 30 Hz - 30 kHz (+0/-2 dB)
Signal-to-Noise Ratio	Balanced Output: -120 dBu (A weighted, input equivalent level)
THD	Balanced Output: < 0.005% @ 1 kHz (at LINE position +19 dBu output)
Phantom Power	48 V (±1.5 V)
Sample Frequency	1 kHz
Battery Requirement	6 x alkaline AA
Current Drain	Not Specified By Manufacturer
External Power	10.5 ~ 17 VDC @ 200 mA
Dimensions	9.0 x 6.5 x 2.3" / 220 x 160 x 56 mm (without protrusions)
Weight	2.9 lb / 1.3 kg (without batteries)
Packaging Info
Package Weight	3.85 lb
Box Dimensions (LxWxH)	10.4 x 6.7 x 3.7"

On-board A/D converter and 2-channel mini-USB digital audio output
Mini-USB output connects to computer, smartphone, or tablet
Simultaneous use of both outputs allows the analog signal to be sent to the camera while a backup digital signal can be sent to a smartphone or tablet or computer via mini-USB
4 balanced XLR line/mic inputs and pan controls
Switchable 48V phantom power and limiting
Professional-quality VU meters
2 balanced XLR outputs (line/mic switchable)
Stereo mini-jack output for DV cameras
6 x AA battery powered
Optional A/C adapter (sold separately)

Related Questions and Answers

Q: 1. do you get all four of the outputs from the usb?

A: According to page 05 in the manual, you would get a single stereo (left and right) channel output via USB into your computer. https://www.azden.com/wp-content/uploads/pdf/FMX-42a_42u.pdf

Q: 2. Will this work with four Shure CVB-B/O Boundary Condenser Microphones?

A: The CVB/O operating voltage is 11V - 52V of phantom power. The SCM268 will give you 12V of phantom power so this will work with 4 - CVB/O microphones.

Q: 3. I copied the following from the Shure manual. Would any of these setting cause over sensitive clipping/muting from my amp? Thank you Low-Cut Filter 1 - 8: Recessed screwdriver adjustment provides adjustable low-frequency rolloff (high pass) to reduce undesirable low-frequency signals. High-Frequency Shelving Filter 1 - 8: Provides level boost or cut in mid/high-frequency region to compensate for off-axis tone coloration, or for cutting high-frequency sibilance.

A: The low and high-cut settings mentioned in the manual only affect the frequency of the signals passed by the Shure SCM810 8-Channel Microphone Mixer, and would not influence factors related to volume or signal strength from the output of the mixer into an amp.

Q: 4. Does this require a separate amplifier to power the microphone?

A: If you are using a condenser microphone, this mixer will provide 12V phantom power to power that microphone.

Q: 5. Can i use this mixer with a Sony HRX-MC 1500 camcorder? The camcorder have a 3.5 jac for a microphone.

A: If the camera has a 3.5 mm jack for a microphone input, then yes, you can use the FMX-DSLR with it.

Q: 6. can this convert mic level to line level?

A: There is a button in the back that will let you change line/mic.

Q: 7. Is this a preamp?

A: It is a two channel mixer with two preamps.

Q: 8. Wha is this mexer used for is used for live music?

A: It is being used in a church. For voice and music reinforcement.

Q: 9. Can this fit on a 4U standard rack mount carrying case.The width fits the standard measurement?

A: Yes it can.

Q: 10. What cable can I use with this device to output the audio to a PC mic port?

A: Use this : https://www.bhphotovideo.com/c/product/847696-REG/Hosa_Technology_MXM_001_5_Camcorder_Microphone_Cable_XLR.html or an interface https://www.bhphotovideo.com/c/product/1479273-REG/focusrite_scarlett_solo_3g_scarlett_solo_usb_audio.html?sts=pi&pim=Y https://www.bhphotovideo.com/c/product/828586-REG/Hosa_Technology_HXP_003_HXP_003_Unbalanced_1_4_TS.html?sts=pi&pim=Y

AKareem	06/09/2024
[3.85 lb] Amazing quality, I was struggling to get good audio during my filming. When i get this product, I feel confident with my audio recording. Thanks for Azden and BHphotovideo to have this products. 5

NickMDal	21/06/2024
[11 kOhms] I shoot wildlife video and take this in my pack or in the back on the back of a mountain bike. I mix a lav with a stereo ambient mics. The sound is as absolutely clean. The controls are a breeze. It is light and perfectly counterbalances a Canon XA20 on the tripod. Ignore people complaining that this brand is not linked with high end audio. For the price, it is magnificent. I love it! 5

Chris	08/05/2024
[3.85 lb] I labored over the purchase of this mixer. As a freelance videographer, I need a decent quality mixer but I have to spend my pennies wisely. I came within a hair of getting the tried and true Sound Devices 302 but I took a big chance and decided to get the Azden at 1/3 the price. The build of this mixer is excellent and the sound quality has been great for my needs. I do a lot of corporate and industrial video as well as some indie work where margins are really tight, but the FMX-42u has delivered the sound I need for my purposes. If you need a solid mixer that will get the job done and don't require top tier gear to impress your producer, give this mixer a try. 5

Omar	07/05/2024
[6 x alkaline AA] Do not use any type of batteries other than AA Alkalines or things can distort. This is a top quality mixer, you can't go wrong. 5

Gabe	15/04/2024
[11 kOhms] The Azden FMX-32a is my second Azden mixer. I own, and still use, the earlier, 32 version. As a professional videographer, I shoot videos that often require more than one microphone. An example of these include dance recitals, wedding ceremonies, question and answer lectures, and town and city counsel meetings - to name a few. It goes without saying that wireless microphones are the norm in these situations. The Azden-32a has 3 XLR mic inputs that allow you to control the level of each mic. Output from each input can be assigned to either a Left or right channel by little switches below the level controls. Individual Limiters can be turned On or Off to protect against in-the-red-zone output. While the Azden FMX-32a does provide a headphone input for monitoring the audio, I use the mic input on my video camera to monitor my audio. Output levels are monitored by green, yellow, and red lights The power for the Azden is provided by an easily-accessed little compartment on the top of the mixer and utilizes 6 double A batteries. Electrical power is also possible with the purchase of an additional DC adapter. Dimensions of the unit - Length: 6 1/2 Width 3 1/2 Height: 2, In addition to its superb features, the construction of the Azden. Is top notch quality. And lastly, what I absolutely love about this little guy is how I am able to attach it to my video camera. Keep in mind that I am not using the Azden attached to my video camera in a walk-around shoot. I am attaching it to my camera that is attached to a tri-pod that is attached to wheels (for mobility). How do I attach it to my camera? I purchased a K-Tek Shoe Mount plate. I Attached the plate to the bottom of the Azden FMX-32a with heavy duty Velcro. My mic receivers are attached to a thin wooden plate with Velcro. If you are shooting a job in which you require the ability to use multiple, check out the Azden FMX-32a. 5

John	30/11/-0001
[3.85 lb] Very nice, low cost mixer. I replaced a Shure FP32 with this new Azden and I'm very happy. The only weird thing is having to take it apart to flip the dip switch to set the VU meters to work with line output vs. mic output. 5