Automate your camera workflow without the need for an app with the edelkrone Controller v2. This updated pocket-sized controller is engineered to work with edelkrone motion-controlled sliders, jibs, heads, and dollies. The controller v2 now allows you to control the rig wirelessly from up to 82' away or via a separately available 3.5mm wired link cable from up to 131' away. It features a larger OLED display and can also utilize the Link Hub to control multiple wired devices at the same time.

The controller is powered using two separately available AA batteries, and the v2 model has been updated to have a battery life for 10+ hours when using wireless control and 23+ hours when using wired control (depending on the type of AA batteries used). Simply use the directional pad to move your device into position and press one of the three buttons to record the position. Positions can also be set manually and recorded with devices that allow hand control. For each position, speed, acceleration, and any axis can be adjusted, such as slide, swing, pan, tilt, and focus.

For edelkrone Motion-Controlled Devices    Control Devices without an App    Wired up to 131', Wireless up to 82'    3 x Programmable Buttons    3.5mm Link Connector for Wired Control    Create Custom Time-Lapse Shots    Wired Battery Life up to 23+ Hours    Wireless Battery Life up to 10+ Hours    Firmware Upgradeable for New Functions    Powered by 2 x Separate AA Batteries

• Double wireless battery life (10+ hours depending on the type of battery used)
• Quadrupled wired battery life (23+ hours depending on the type of battery used)
• Bigger, easier-to-read OLED display
• Wired connection option to a single device, or multiple-device wired connection when used with Link Hub
• 131' total cable length for a fully wired option
• Gesture control mode

• Up to an 82' wireless range
• Wired control via optional 3.5mm link cable
• Instant wireless pairing with your edelkrone device
• Join paired group
• Firmware upgradeable to gain new functionality
• Powered by two AA batteries (not included)
• Wrist strap included

• HeadPLUS v2
• HeadPLUS PRO v2
• Slide Module v2/v3
• JibONE v1/v2
• DollyONE
• DollyPLUS
• DollyPLUS PRO
• HeadONE
• SliderONE v2
• SliderONE PRO v2
• Pan PRO
• FocusPLUS PRO

• Slide Module v3
• JibONE v2
• Pan PRO
• HeadPLUS v2
• HeadPLUS PRO v2
• FocusPLUS PRO

The Controller v2 gives you the ability to easily create smooth time-lapse shots with your motion-controlled device. Enter the duration, shutter speed, and interval with the controller, then set the start and end poses with two of the three buttons. Simply press and hold the select button to begin the time-lapse movement.

Related Questions and Answers

Q: 1. Does the edelkrone controller v2 with the edelkrone HeadOne?

A: Yes, the edelkrone Controller v2 will be able to control the HeadONE.

Q: 2. Can it control the Slider Module v2 and HeadOne simultaneously to do slide and pan moves at the same time?

A: No, but you can use the edelkrone app to control and program simultaneous moves for your devices, such as the JibONE and HeadPLUS. The app allows you to set keyframes, adjust the speed, and perform complex motions with multiple devices working together. For live control, you can use the app to make real-time adjustments and execute the moves while monitoring the progress on the app's interface. This allows you to perform live, simultaneous moves with your devices, giving you full control over your shots during the production.

Q: 3. Hi there, do I need anything else for this to work or it will work out of the box with the Revo SR 1500 shoulder rig and a Canon &D Mk II and 24-105 lens? Thanks a lot.

A: You need a lens gear. Get this and cut to size.

Q: 4. If connected via wire, can you simultaneously control it with the app as well? (but of course not sending commands at the same time).

A: The Edelkrone Controller v2 (B&H# EDCV2) may be used in wireless or wired mode, but not in both at the same time.

Q: 5. Could it work with the new Adelkrone remote ?

A: The edelkrone FocusONE Follow Focus Unit is a hand controllable, analog, follow focus unit. As such it will not be able to work directly with an electronic remote.

Q: 6. Can the unit be operated from the right side of the camera? Will the white disc be visible?

A: Yes, this follow focus has a Built-In Reversing Gear Unit. You will be able to operate it from the left or right side. However if you operate it on the right side, the white disk will be pointing away from the user of the camera.

Q: 7. Can this be used for a manual slide or do I need to remove it and replace it with the steady module? I'm hoping that this provides similar resistance to the slide as the steady module does so I don't have to purchase both.

A: This is not a good solution for manual slides. We do not recommend it.

Q: 8. does it control it wirelessly?

A: Yes, The edelkrone Controller v2 has a Up to an 82' wireless range.

Q: 9. I've used other turntables in the past that are quite shaky especially when filming in macro. Is this turntable 100% smooth?

A: The edelkrone Turntable Kit v2 when paired with the HeadONE is very smooth. You should not notice any shaking.

Q: 10. Which direction does this unit pull focus? Is forward pulling infinite focus? Is backwards pulling for close upshots or is it the opposite?

A: As you rotate the follow focus ring to the right, it will also turn the lens ring to the right.