The DV-MFSW-21CEC FSR 2x1 Digital Video Switcher CEC Supportfrom FSR 2x1 Digital Video Switcher CEC Supportfeatures 1 HDMI input supporting resolutions up to 4k x 2k @ 30 Hz and 1 VGA (HD-15) input supporting resolutions up to 1920 x 1200 @ 60 Hz. The DV-MFSW-21CEC has a locking 12v power supply and can be controlled via front-panel push-buttons, contact closure, or RS-232 via Phoenix 3-pin, or Auto-Sensing. The DV-MFSW-21CEC provides LED Feedback for contact closures.

HDMI, VGA & Audio In, HDMI Out    Up to 4K x 2K at 30 Hz on HDMI    Up to 1920 x 1200 at 60 Hz on VGA    Front-Panel and RS-232 Control

• HDMI 1.4 and HDCP compliant
• Auto sense automatic switching technology
• Front-panel push-button local control
• Contact closure control with +12 volt Lamp/LED output (@ 100mA when active)
• Serial (RS-232) remote control
• Configurable auto-switch mode allows selection between fifo and lifo switching
• CEC Support

Related Questions and Answers

Q: 1. it is work with alpha key & fill inputs to make a layer inside it?

A: This switcher has the ability to Chroma Key and it also has two Downstream Keyers for bringing in graphics and titles.

Q: 2. How loud is the SE-650 in db? I want to use it in conjunction with a podcasting setup, where every noise is a no-no. Some units have load fan noise.

A: The manufacturer was unable to provide an accurate db level for this product. Their recommendation was, if considering another product is an options, to possibly look into the SE-500MU - https://bhpho.to/3dpW5GG which they regard to be "whisper quiet"

Q: 3. Can this mixer do 1080/30p and 1080/60p? Can you mix different resolutions or they have to match?

A: SE-650 will support 720p-60 as well as 1080i-60, but not 1080p. Thanks,CraigDatavideo

Q: 4. Hi. can i connect my HDMI laptop directly?

A: Yes, you can plug your laptop into 1 of the 2 HDMI output ports.

Q: 5. As far as i understand from current pdf spec's sheet from datavideo this unit doesn't have software audio mixer? I.e. i can assign sound channel from any sdi or hdmi input to any output but cannot mix different sources (for example XLR + SDI2) to one output? Maybe there is a changes connected with a new firmware or software?

A: The main idea with SE-1200 is to use an external audio mixer then connect it to the XLR inputs of SE-1200. If you would like to also mix a camera audio input with the other audio, then you could use a Datavideo audio de-embedder (DAC-90) which will extract the audio from the SDI then allow you to connect it to an external audio mixer. If you only need 4 inputs instead of 6, you may want to consider the SE-650. It does have a built in audio mixer which would allow you to control audio levels on an embedded audio signal from HDMI or SDI camera input. The price is lower and you don't need a control surface since it's built into the switcher.Craig

Q: 6. If I need to insert a clock shot into the video, can I do that with this switcher?

A: If you wish to train a camera on a clock face, you can certainly pull up that camera and put that into your main view if you wish.

Q: 7. Can I use this witcher with composite video out, like the one on datavideo se-500

A: Hello, No, BNC connector on the SE-500 is for a Composite signal input. Our SE-1200MU switcher is a HD switcher that accepts HD-SDI or HDMI signals. It is compatible with Composite output from a consumer camera.

Q: 8. Are the keys (buttons) on this machine made of rubber?

A: Yes. The following keys are made of rubber.

Q: 9. Hi.. i just bought se 1200 switcher.. i wonder how can i set up the software to control it on my windows laptop.. pls guide me to set up it.. thank you..

A: If you are having issues setting up your SE-1200MU feel free to email us directly at provideo@bhphoto.com. We will be better able to assist you through email.

Q: 10. Does the mixer have an option to turn on/off HDCP?

A: We're afraid not. This switcher does not offer HDCP controls, you will not be able to connect HDCP compatible products to it. Instead you could look at the Roland V-1HD Portable 4 x HDMI Input Switcher, which allows for HDCP compliance to be enabled. https://bhpho.to/2gRuG3C