Designed to deliver stellar audio performance and versatility for intensive audio applications, the 12" RCF ART A912-AX 12" 2100W Bluetooth PA Speakeris a highly flexible, easy to use, 2100W powered PA speaker with Bluetooth and a built-in 6-channel digital mixer for today's working musicians, singer/songwriters, mobile DJs, and other sound providers. The advanced user interface features a built-in touch panel and Bluetooth remote control, which allow you to set up and control the mix wirelessly using your favorite portable device.

The ART 912-AX employs True Resistive Waveguide technology, which incorporates several refinements of the transducers and the vented port design to create a resonance-free signal that reduces high-frequency distortion. The speaker also utilizes Bass Motion Control (BMC), which bypasses the need for a high-pass filter and instead uses an advanced woofer excursion management feature that can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity. The highly efficient 2100W Class-D bi-amplifier delivers 1400W to the 12" woofer and 700W to the 1.75" compression driver, which provide full-range audio (50 Hz to 20 kHz) with a sound pressure level powerful enough to ensure the entire audience can hear your performance. The ART 912-AX includes a power cord.

Bluetooth Stereo Audio Input    Built-In 6-Channel Digital Mixer    Advanced UI with Touch Panel & Remote    FiRPHASE Filters for Coherent Sound    Bass Motion Control Low-Freq Management    12" Woofer + 1.75" Compression Driver    50 Hz to 20 kHz Frequency Response    130 dB Max SPL Output    True Resistive Waveguide Technology    Configurations for Floor, Stage, Flown

• Built-in 6-channel digital mixer
• Advanced user interface with touch panel and remote control
• 1.75" compression driver and 12" woofer
• Up to 130 dB sound pressure level
• 2100W Class-D bi-amplification
• Dual combo preamp with 48V Power and mini-jack stereo line input
• Bluetooth stereo audio input, with dual speaker pairing option
• True Resistive Waveguide, FiRPHASE, and Bass Motion Control

Connect your instruments and microphones to the 48V powered preamps or the line inputs; an internal 6-channel digital mixer with Compressors, EQs, Reverb, and Ducker will help you get the job done. And if you run out of time, use the quick setup modes with step-by-step configuration options.

The Class 1 Bluetooth connection can receive 2-channel audio streaming and provides a stereo or dual mono output for pairing with AX-featured RCF speakers. RCF tested over 328' free-field operability. Enjoy the convenience of Bluetooth connection when you have architectural constraints, pedestrian areas, or inaccessible signal connections.

• Get the best microphone you have, because ART 9-AX provides you with the best preamp you can find in this segment.
• The microphone preamplifier circuit features the latest THAT Corporation technology to provide ultraclean and precise signal to the speaker.

• With 2100W of power, the 2-channel ART 9 Class-D amplifier is 50% more powerful than previous models, able to manage extremely high sound pressure levels with an ultrafast attack, realistic transient response, and very-low heat loss
• ART 9 is very energy efficient, so there is no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the back of the unit—with no moving parts. Being physically connected with the internal frame, the amplifier is firm and solid within the cabinet. The input circuit features a new low-distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels
• All ART 9 amplifiers are designed according to EN62368-1 for maximum safety and present a Switch Mode Power Supply section joining high efficiency with minimum weight.

RCF LiveRemote App makes it easy to adjust ART 9-AX mixer, DSP, FX, routing, and Bluetooth settings. LiveRemote also allows full control of the internal ART 9-AX engine: recall and save presets, set your desired volume levels, adjust EQ, compressors, and FX, customize and tune your sound system and much more. Available for Android and iOS phones and tablets.

The internal mixer disentangles all your routing needs, and an internal crossover helps you use the speaker with any subwoofer. An internal 5-band parametric EQ lets you manage boomy spaces or modal resonances, while the output delay keeps your sound always in time. Wireless pairing to another ART 9-AX is a handy tool when you have physical constraints and can't run signal cables.

• The sleek cabinet uses a special polypropylene composite material with a radically new construction concept
• The grille cover is heavy-duty steel, protecting both transducers and vented ports
• The purpose-designed M-brace connects the four internal sides of the cabinet and amplifier, preventing any deformation for a completely inert body, with augmented acoustical damping, even at maximum volume settings
• It also performs as a reinforcement structure, for greater resistance to mechanical stress.

• When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature.
• ART 9 with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
• The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer.
• When high-pass filters normally protect the woofer motion from becoming destructive, but change the phase behavior, the BMC algorithm breaks conventional rule. In combination with FiRPHASE technology, ART 9 has a level of DSP audio performance never achieved in this range of speakers.

• The design of the FIR filter for this specific purpose starts from an accurate measurement of the loudspeaker phase.
• FiRPHASE algorithm uses this measurement and adapts the loudspeaker’s phase without touching the amplitude equalization. The heart of the advanced technique used by FiRPHASE is a recursive method (least-squares method) combined with a proprietary algorithm that calculates the best FIR filter coefficients set in according to amplitude and phase constraints
• The algorithm corrects phase and amplitude (if necessary) by considering the weak points of the transducers and the resonances or cancellations due to the cabinet of the loudspeaker.
• This technique allows a deep control of phase at the mid-low frequency with relatively small filters, reaching a higher resolution than that one as theory suggests.

• The True Resistive Waveguide is the result of several refinements in both the transducers' and the vented ports' design with Finite Element Analysis and constant measurement in RCF anechoic chambers
• Thanks to FiRPHASE technology, the new shape, and the placement of the ports, the speaker now acts as a single ideal source for a perfect sound image
• Acoustically, the TRW waveguide mimics a resonance-free pure resistive load, reducing the high-frequency distortion of a classic horn. With its asymmetrical sound shaping, the coverage angle of the waveguide provides constant directivity to the entire listening area and improved stereo panorama.

• High frequencies: the 1.75" compression driver voice-coil design with Polyimide-Kapton dome features a new bonding technology and reinforced ribs, making it 10 times more durable than previous designs. The redesigned phase plug increases sound clarity, enhancing transient response and improving coupling with the low-frequency transducer
• Low frequencies: low-frequency transducer design gains more stability over higher currents, with less distortion, and is highly efficient in terms of heat dissipation. RCF quality control is very strict. The woofers are tested with a 200-hour continuous signal to stress the transducer at extreme levels.

Related Questions and Answers

Q: 1. I have a soundbar connected to my TV, but it has no other connections. Can the right bookshelf speaker be connected to my TV?

A: The Edifier R1280DB Bluetooth Speaker System (Black), BH # EDR1280DBBLK, will connect directly to your TV via one of the following methods: Optical, Digital Coaxial, 2x RCA Inputs, and Bluetooth A2DP and AVRCP.

Q: 2. Regarding the bluetooth...Thinking of pairing this with a AT LP-60XBT turntable. Do both speakers connect via bluetooth, or is one a wired connection, or?

A: The 1st or "main speaker has a BT receiver, so no wire need to it, however: They also provide wired connectivity as follows, per the spec sheet: (the 2nd speaker DOES require a wire to connect to it, from the 1st or "main" speaker. Right: 1 x Optical TOSLINK Input (Audio) 1 x Digital Coaxial Input (Audio) 2 x Stereo RCA Input (Audio) 1 x Spring Clip Pair Output (to Other Speaker) Left: 1 x Spring Clip Pair Input (from Other Speaker

Q: 3. how long do battery's last?

A: The Pyle Pro PPHP266B Dual 6.5" 2-Way 500W Portable Bluetooth PA Speaker with Light Show specifies a battery life of up to 2 hours.

Q: 4. Peek power is 1000 W, what is the RMS?

A: Peak.

Q: 5. Does this speaker have a mounting point on the bottom if I want to hang it on the wall?

A: The Beringer B105D 50W PA/Monitor Speaker with MP3 Player and Bluetooth has a mounting threaded hole at the bottom that allows it to be attached to a microphone stand. Using a 5/8" threading adapter will allow you to mount it to a wall.

Q: 6. CAN YOU PAIR THIS TO A WINDOWS 10 COMPUTER AT THE SAME TIME YOU ARE USING WIRED SPEAKERS? i WOULD LIKE TO SET THEM UP EITHER IN THE BACK OF THE ROOM OR IN THE LIVING ROOM ABOUT 15 FEET AWAY FROM THE COMPUTER. ITS A DELL XPS COMPUTER

A: Yes, you would need to configure it to play both through you PC sound options.

Q: 7. The specs list only AC power and a locking connector, while the video says power is only via a battery. Which one is it? And what specs are for that battery?

A: The APX12 GO BT’s internal 700mA 12V battery allows up to eight hours of use from a single charge, while a handy four-segment LED battery life indicator provides a snapshot of the amount of charge remaining. An IEC power input socket can be used both for charging and running the system from a wall socket instead of the battery.

Q: 8. i have a different brand BT speaker. can i still able to pair them up?

A: As long as your device has the ability to pair with two different Bluetooth items, you will be able to use the American Audio APX12 GO BT Two-Way 12" 200W Battery-Powered Portable PA Speaker with Bluetooth & Wireless Mic as well as your other Bluetooth speaker.

Q: 9. What is the weight capacity of this mounting bracket?

A: There is no set weight limit for this Auray Mounting Adapter. It is not intended to support the weight of the speaker, the weight would be supported by the stand it is used with. The maximum weight for the speaker would depend on the weight limit for the stand used with the adapter.

Q: 10. Can you record on this system? We'd like to use it for meetings, but need a way to share the audio later

A: No it can't be use for recording. Only, It can Instantly Stream Music from Your Bluetooth Devices