Designed from the ground up to deliver stellar audio performance, the RCF NXL 44-A MK2 is a 2100W active 2-way column array speaker that's tuned for absolute clarity and deep, powerful bass well suited for bands, DJs, clubs, and rental houses. The NXL 44-A can be used alone, on a pole, or paired with a subwoofer, vertically coupled for improved vertical coverage, and can also be flown or truss-mounted using the included rigging points and special accessories.

The integrated bi-amplifier delivers 700W to the high-frequency compression driver and 1400W to the three 10" woofers, which combine for a 45 Hz to 20 kHz linear frequency response and a peak SPL of 135 dB. The rugged, tour-ready, high-quality Baltic birch plywood cabinet is easy to carry and installed securely using the dedicated rigging points.

For Portable and Installed Applications    Sleek Column Design & Flexible Rigging    2100W Class-D Amplifier    3" Titanium Neodymium Compression Driver    3 x 10" High-Power Neodymium Woofers    45 Hz to 20 kHz Frequency Response    Up to 135 dB Sound Pressure Level (SPL)    100 x 25° Constant Directivity Coverage    Bass Motion Control & FiRPHASE    8 x M8 Rigging Points and 8 x Quick Lock

• Up to 135 dB sound pressure level (SPL)
• 2100W Class-D amplifier
• 100 x 25° constant directivity coverage angle
• 3" titanium neodymium compression driver
• 3 x 10" high-power neodymium woofers
• 45 Hz to 20 kHz linear frequency response
• Bass Motion Control and FiRPHASE processing
• 8 x M8 Rigging Points and 8 x Quick Lock
• IP Rated Powercon TRUE1 TOP IN/OUT

• LINEAR: This preset is recommended for all regular applications of the speaker.
• 2 SPEAKERS: This preset creates the correct equalization for the use of two NXL 24-A or NXL 44-A coupled on a subwoofer or in suspended configuration.
• HIGH-PASS: This preset activates a 60 Hz high-pass filter for the correct coupling of the NXL 44-A with subwoofers not provided with their own internal filter.

The most powerful amplifier in its class. RCF's improvements in transducer design make them stronger and more powerful. With 2100W of power, the NXL MK2 2-channel Class-D amplifier is 50% more powerful than previous models. NXL manages extreme sound pressure levels with an ultrafast attack, realistic transient response, and very low power loss. NXL modules are energy-efficient so there's no need for a cooling fan—the amplifier is attached to a solid aluminum heat exchanger in the rear of the cabinet—with no moving parts. The input circuit features a new low distortion design with an advanced safety limiter, maintaining the true character of the input signal at all levels. All NXL amplifiers are designed according to EN62368-1 for maximum safety and house a Switch Mode Power Supply section with minimum weight.

The vertically asymmetrical horn design accurately projects the sound energy and avoids unwanted reflections when placed on a sub or a speaker stand, without tilting the enclosure. This design also allows configuring two cascading NXL columns for optimal coverage. Intelligibility is significantly increased in challenging acoustic environments. The speaker delivers an extended low-frequency range that is increased when paired with a subwoofer for medium-sized concerts and DJ sets.

Lightweight and powerful, RCF drivers are a reference in high performance. All transducers are designed by RCF engineers in Italy for maximum reliability and perfectly matched components. The extended clarity of the 3" compression driver features a neodymium magnet for improved current handling and reduced weight. The best-in-class titanium dome and the Polyimide/Kapton voice coil handle extreme power levels with very low distortion. Three, high-power 10" low-frequency woofers with a new advanced transducer design gain more stability over higher currents, with less distortion, fast transient response, and better heat dissipation.

• When searching for an extended bass with enhanced performance, RCF engineers found a way to remove the high-pass filter, replacing it with a forward-thinking approach. Introducing BMC (Bass Motion Control), the newly advanced woofer excursion management feature. The speaker equipped with BMC can handle the lowest audible frequencies without affecting the woofer stability, with extended linearity and better sound integrity.
• The BMC method works by creating a complete map of the dynamic behavior of the woofer, to generate a custom algorithm that only limits over-excursions. This gives total freedom of signal reproduction to the transducer. When high-pass filters normally protect the woofer motion from becoming destructive but change the phase behavior, the new BMC algorithm breaks conventional rules.

• RCF speakers are designed using a proprietary and advanced digital FiR technology, conceived to deliver transparent sound, absolute clarity, and perfect imaging to the listener.
• The special FiRPHASE filters allow for coherent distribution of sound for all listeners without phase distortions, ensuring minimum latencies in the system.

NXL series consists of full-range column line array speakers ideal for high-powered portable and installed professional applications where size is a critical factor. The sleek column design and flexible rigging options make it a smart choice for a wide range of sound applications. The rugged, high-quality Baltic birch plywood cabinet is easy to carry, with ergonomic handles on each side. It can be used alone, on a pole, or paired with a sub, vertically coupled for improved vertical coverage, and can also be flown or truss-mounted using the included rigging points and special accessories. From the cabinet to the final texture and the rugged protective grille, NXL Series offers maximum strength for intensive use on the road and can be used for fixed installation.

Related Questions and Answers

Q: 1. Does this tripod come with a panning arm that allows you to move camera/iPad to pan a game?

A: These are just tripod legs, you will still need a pan head to attach. Click the link below to view; https://bhpho.to/2NDq8jH

Q: 2. Hi Folks,This tripod looks great, and I think it will fit my needs very well. But I notice the center post has a 3/8 x 16 bolt. Is there any way to adapt it to a 1/4 x 20 head? Thanks very much.

A: If the head you are using does not have a reducer bushing in place (allowing conversion from 3/8 to 1/4-20, via removal), you can use one of these pieces:Impact Small 3/8 Female Threaded Adapter to 1/4 -20 Male Threaded PostB&H # IMCA103 Mfr # CA-103

Q: 3. Does this work with other brand CFexpress cards - specially Sony?

A: This card reader works with any brand CFexpress Type B cards.

Q: 4. Will the 161mk2b accommodate the Manfrotto Nitrotech N12 Video Head?

A: yes, it will

Q: 5. Is the card reader plug and play? Neither my Mojave imac or windows 10 system detected it.

A: Yes, the Angelbird CFexpress Type B MK2 Memory Card Reader does not require anything else to work.

Q: 6. which dolly can I use with these legs?

A: Sorry, but I never use a dolly with this tripod.

Q: 7. What do I need to buy to shoot overhead with this tripod (which extension arm and any other necessary brackets, etc.)? Thanks so much.

A: There are several options for shooting overhead such as this Manfrotto arm: B&H # MA131DB MFR # 131DB https://bhpho.to/3rRQoZ9 You will beed a head if you choose the Manfrotto arm. Another option is this Photek arm which incudes a head: B&H # PHT2500 MFR # TRI-X-2500 https://bhpho.to/3sRwcIg The Photek arm extends to 32 inches which is about 8 inches longer than the Manfrotto arm.

Q: 8. Is the geared post also a larger diameter (sturdier) than the 475B model?

A: Yes, the geared post is also larger/sturdier to accomodate heavier loads than the 475b model.

Q: 9. Can I connect a Zoom audio recorder to this speaker to record the DJs master mix via XLR?

A: If the venue is only using a single JBL EON ONE MK2, then you can get a complete line out from the 1/4" passthrough jack. However, if they are using two speakers set up in stereo, each one will only be able to feed you one side of the stereo signal.

Q: 10. What is the old number designation for this tripod?

A: When I first purchased this item it was a Bogen 3258. I don't know if Manfrotto temporality kept the old designation or not.