Power an Olympus camera that uses a BLN-1 camera from a USB Type-C power source with the Bescor Olympus-Style BLN-1 Dummy Battery with USB Type-C Power Input Connector. This regulated power adapter cable plugs into a USB Type-C power source and converts the 5 to 12 volt input to the 8 volts to power your camera.

Power your Olympus Camera    Power Regulated Dummy Battery

Related Questions and Answers

Q: 1. which cameras' can run using this as power supply for camera ?

A: The Bescor Canon Style PD-E1 USB Power Adapter (B&H# BEPDE1) can be used while camera power is on, but not as a total substitute for a battery (i.e., a partially charged battery should be in the camera) with a variety of Canon RF-mount cameras. Some examples currently working include the Canon EOS R (B&H# CAERB), EOS R6 (B&H# CAER6), EOS R6 MKII (B&H# CAER62), EOS R5 (B&H# CAER5), EOS R5 C (B&H #CAER5C), EOS R7 (B&H# CAER7), EOS R50 (B&H# CAER50) as well as some camcorders such as the XA65/60. (Please note that as of this writing there is no USB-based power option for the popular EOS R100 (B&H# CAER100).)

Q: 2. Will this adapter work with the Bescor dummy battery for the Olympus OM-D EM5iii camera? I have the dummy battery but it requires an 8V input...

A: Yes, the following adapter will work.

Q: 3. My intention is to plug this into the came-tv mini 99 and then plug into my m50 coupler. would this work?

A: If your coupler has a 2.1mm barrel connection it should work with the Bescor D-Tap to 8V Power Converter for DC Coupler/Dummy Batteries. We recommend the cable below. GyroVu D-Tap to Canon LP-E12 Dummy Battery (30") BH #GYVDTAPLPE12

Q: 4. what is the input voltage 100-250Volt?

A: The Bescor Canon Style PD-E1 USB Power Adapter can be used in 100-240 volts. You will just need a plug adapter to convert the USA style pulg into the plug in your country.

Q: 5. Will this work with a GVM RGB-10S?

A: This is an NP-F style dummy battery, which is the kind of battery plate the GVM RGB-10S uses. This should work with that light.

Q: 6. Can this be used to power a Canon XF400? The CA-946 output is 8.4v. If not, is there a similar usb adapter that would work?

A: This will not power and XF400. We are not aware of any USB power options that will.

Q: 7. What is the input voltage range 100-250volt ?

A: The Bescor Canon Style PD-E1 USB Power Adapter can be used in 100-240 volts. You will just need a plug adapter to convert the USA style pulg into the plug in your country.

Q: 8. What is the output current rating?

A: This has a 5 VDC USB port and provides 8 VDC power output 7.4 VDC battery. It requires a 2-amp source to function properly.

Q: 9. Which USB-C power supply is recommended both in terms of wattage and product brand/model?

A: The Tether Tools ONsite 26,800 mAh USB Type-C Battery Bank (100W PD) is a good power supply to use with the Bescor EN-EL15/EP-5B Dummy Battery with USB Type-C Connector Kit. Here is the link: https://bhpho.to/3pGcoe3.

Q: 10. What is the output voltage of the Bescor Canon style PD-E! USB power adapter?

A: The Bescor Canon Style PD-E1 USB Power Adapter input is 100-240v, 1.8A 50-60hz. And the information on the adapter for output is listed as 5V-3A/9v-3A/12v-3A/15v-3a/20v-3.25A.