The small, chroma key green Bubblebee Spacer Bubble Windshield & Fur Cover for Shotgun Micsis a multipiece, adaptable windshield system for shotgun microphones, which allows you to quickly switch from indoor to outdoor recordings in a matter of a few seconds. It fits microphones 18 to 24mm in diameter and has an inner depth of 105mm to cover all the ports on the mic. Designed specifically for boom operators, videographers, sound mixers, and sound recordists working under changing locations, it greatly reduces noise from wind, vocal plosives, and boom 'swoosh' while remaining acoustically transparent. The system includes the Spacer Bubble, The Long-Hair Spacer Cover (fur), and a mesh storage bag.

Reduces Wind Noise    Fits Microphones 18 to 24mm in Diameter    105mm Inner Depth    The Spacer Bubble Windshield    The Long-Haired Fur Cover    Acoustically Transparent Design    Quick-Drying Fur    Mesh Storage Bag

• Sony: Camera mic, ECM-673/9X
• JVC: Camera mic

• The Spacer Bubble windshield is constructed of a noise-free mesh base with coarse foam inside. The company's specially designed rubber base provides easy and secure mounting to keep the windshield firmly in place.

• The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip on the included long-haired fur cover and get effective wind noise protection with optimal transparency within seconds.
• If you're working in light-to-medium winds, you can use The Short-Haired Spacer Cover (available separately) instead.

• Switch locations fast and get great audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh', and wind.
• Small size fits microphones 18 to 24mm in diameter, 105mm inner depth.
• Specially designed rubber base for fast, easy, and secure mounting.
• The Base windshield is made from highly efficient mesh, allowing your microphone to sound as natural as possible.
• The slip-on fur is made from Bubblebee Industries' best high-density imitation fur, which allows for optimal frequency transparency and effective wind protection.
• Quick-drying fur: If it gets wet simply place the fur cover it in the aerated mesh bag and allow it to dry naturally.
• Practical mesh bag is included for easy storage and fast mounting.
• Designed in Denmark by sound lovers, for sound lovers.

Related Questions and Answers

Q: 1. What is the outer length in cm?

A: The Bubblebee Industries The Windbreaker is designed specifically for use with the Rycote Modular Windshield WS 4 Kit. The manufacturer has not provided any specifications for the Windbreaker, but the Rycote Windshield has a body length of 33 cm, so the internal length of the Windbreaker should match..

Q: 2. Mkh50?

A: No, the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Black, Extra-Small) is not compatible for use with the Sennheiser MKH 50 Microphone. All of the Spacer Bubble models are designed to fit microphones that have a diameter of 18 to 24mm, but the MKH 50 has a 25mm diameter. As a better option, you can use the Rycote Super-Softie Windshield for Shotgun Mics - 5cm, 24/25 (B&H # RYWSQAT), which is designed to fit mics that have a diameter of 24 to 25mm and it is compatible for use with the MKH 50.

Q: 3. Is the Sennheiser MKE 440 Stereo Shotgun compatible with, or adaptable to, the Zoom H6 recorder? instead of the capsule mic it comes with?

A: Yes. This will work with the 3.5mm microphone input. Just keep in mind it will disable the built in mics.

Q: 4. How does this mic hold up in LOUD environments? Clipping issues at all?

A: No clipping issues as far as my use with it is concerned. I am very impressed with the mics ability to pull the audio out of the direction its pointed amidst a loud environment. B&H demonstrates this quite nicely in their own in store review video. Out of all the mics I have used, I honestly give it a solid 10/10 all around.

Q: 5. Will this properly fit on a camcorder Panasonic CX350 with a MKH 416?

A: Yes, the extra-large Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics is compatible for use with the Sennheiser MKH 416 Shotgun Microphone when mounted on the Panasonic AG-CX350 4K Camcorder.

Q: 6. Can i plug the Sennheiser MKE 440 into my Tascam DR-05 Portable Handheld Digital Audio Recorder ?

A: Yes Tuscam DR-05 has 3.5mm mic/line sterio input (unbalanced)For professional work I suggest Tuscam DR-100mkiii which has XLR inputs and Senheiser MKE 440 using Alzo Stereo Microphone XLR Adapter Cord for Pro Camcoders (B&H#AL130). It will produce excellent broadcast quality sound.

Q: 7. What is the length of the item?

A: The manufacturer has provided dimensions for the inside depth of the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Extra-Small) which is 2.2" (55mm). It can be used with microphones that have a diameter of 0.7 to 0.9" (18 to 24mm).

Q: 8. Dear sir, is the Sennheiser MKE 440 compatible with Canon 60D?

A: If the 60D has a microphone jack, I dont why it wouldnt work

Q: 9. How long is the outer length of the Large size Spacer Bubble Windshield with Fur Cover?

A: The total length of the Bubblebee Industries BBI-SB is about 6.5 inches.

Q: 10. Is it compatible with Sony a1 camera?

A: Yes, the Sennheiser MKE 440 Stereo Shotgun Microphone is compatible with the Sony A1 Mirrorless Camera.