The large, red Bubblebee Spacer Bubble Windshield & Fur Cover for Shotgun Micsis a multipiece, adaptable windshield system for shotgun microphones that allows you to quickly switch from indoor to outdoor recordings in a matter of a few seconds. It fits microphones 18 to 24mm in diameter and has an inner depth of 155mm to cover all the ports on the mic. Designed specifically for boom operators, videographers, sound mixers, and sound recordists working under changing locations, it greatly reduces noise from wind, vocal plosives, and boom 'swoosh' while remaining acoustically transparent. The system includes the Spacer Bubble, The Long-Hair Spacer Cover (fur), and a mesh storage bag.

Reduces Wind Noise    Fits Microphones 18 to 24mm in Diameter    155mm Inner Depth    The Spacer Bubble Windshield    The Long-Haired Fur Cover    Acoustically Transparent Design    Quick-Drying Fur    Mesh Storage Bag

• Audio-Technica: AT 835ST, AT 897
• Schoeps: Super CMIT5
• Sony: ECM-680S
• Rode: NTG-1, NTG-2, NTG-4, NTG-4+
• Sanken: CS2

• The Spacer Bubble windshield is constructed of a noise-free mesh base with coarse foam inside. The company's specially designed rubber base provides easy and secure mounting to keep the windshield firmly in place.

• Switch locations fast and get great audio transparency while blocking unwanted noise from vocal plosives, boom 'swoosh', and wind.
• Specially designed rubber base for fast, easy, and secure mounting.
• The Base windshield is made from highly efficient mesh, allowing your microphone to sound as natural as possible.
• The slip-on fur is made from Bubblebee Industries' best high-density imitation fur, which allows for optimal frequency transparency and effective wind protection.
• Quick-drying fur: If it gets wet simply place the fur cover it in the aerated mesh bag and allow it to dry naturally.
• Practical mesh bag is included for easy storage and fast mounting.
• Designed in Denmark by sound lovers, for sound lovers.

• The combination of the foam and the mesh provides the perfect conditions for recording indoors. And if you suddenly have to act fast and go outside, simply slip on the included long-haired fur cover and get effective wind noise protection with optimal transparency within seconds.
• If you're working in light-to-medium winds, you can use The Short-Haired Spacer Cover (available separately) instead.

Related Questions and Answers

Q: 1. Can this Windbreaker be used with the Rycote Super-Blimp Kit for Rode NTG?

A: The Bubblebee Industries The Windbreaker for Rycote Modular Windshield WS 4 Kit is built specifically for the Rycote Modular Windshield WS 4 Kit system. It is not meant to be used with other windshield systems, and compatibility is not guaranteed.

Q: 2. Mkh50?

A: No, the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Black, Extra-Small) is not compatible for use with the Sennheiser MKH 50 Microphone. All of the Spacer Bubble models are designed to fit microphones that have a diameter of 18 to 24mm, but the MKH 50 has a 25mm diameter. As a better option, you can use the Rycote Super-Softie Windshield for Shotgun Mics - 5cm, 24/25 (B&H # RYWSQAT), which is designed to fit mics that have a diameter of 24 to 25mm and it is compatible for use with the MKH 50.

Q: 3. If I attach the LG size Spacer Bubble Windshield and Fur Cover to the AT BP4029 (AT835ST), how much mic shaft will be left?

A: The AT BP4029 is 9.29" long, and the Spacer Bubble Windshield & Fur Cover System has an inner depth of 5.1", so the remaining shaft would be 4.19".

Q: 4. Is it compatible with Sony a1 camera?

A: Yes, the Sennheiser MKE 440 Stereo Shotgun Microphone is compatible with the Sony A1 Mirrorless Camera.

Q: 5. What is the rearward rejection like on this mic?

A: The rearward and lateral rejection is quite good. It is not 100% of course. I was shocked at how good it is at lateral rejection. It almost completely eliminated the noise from the shutter of my DSLR with the mic about 10 feet to the side up about 5 feet. My rode mics in x/y configuration 10 feet to the right picked up significant shutter noise. It also greatly reduces room echo.

Q: 6. Will the newer iPhones work with this and a lighting adapter?

A: It will not work properly. Only one of the two stereo mic capsules will work. If your primary use for this mic is for your iPhone, you are better off with either a Mono mic (such as the Sennheiser MKE400 and similar microphones. If you need stereo, look for a which is designed for the iPhone with a lightning connector on it (Shure and Rode, both have good options)

Q: 7. What is the outer length in cm?

A: The Bubblebee Industries The Windbreaker is designed specifically for use with the Rycote Modular Windshield WS 4 Kit. The manufacturer has not provided any specifications for the Windbreaker, but the Rycote Windshield has a body length of 33 cm, so the internal length of the Windbreaker should match..

Q: 8. Can i plug the Sennheiser MKE 440 into my Tascam DR-05 Portable Handheld Digital Audio Recorder ?

A: Yes Tuscam DR-05 has 3.5mm mic/line sterio input (unbalanced)For professional work I suggest Tuscam DR-100mkiii which has XLR inputs and Senheiser MKE 440 using Alzo Stereo Microphone XLR Adapter Cord for Pro Camcoders (B&H#AL130). It will produce excellent broadcast quality sound.

Q: 9. How much more does the Space Bubble reduce wind noise than the Windkiller? 5db? 10db?

A: Bubblebee Industries has not provided a spec for the exact amount of attenuation provided by The Spacer Bubble, likely because this number would be contingent on multiple factors such as wind speed, direction, microphone sensitivity, and so on.

Q: 10. How does this mic hold up in LOUD environments? Clipping issues at all?

A: No clipping issues as far as my use with it is concerned. I am very impressed with the mics ability to pull the audio out of the direction its pointed amidst a loud environment. B&H demonstrates this quite nicely in their own in store review video. Out of all the mics I have used, I honestly give it a solid 10/10 all around.