The green, medium Bubblebee Spacer Cover for Windshield - Green, Mediumis a fur cover designed to slip over The Spacer Bubble windshield size medium, and fit perfectly. Made of high-quality, high-density short-haired faux-fur, it allows for optimal frequency transparency and effective wind protection when recording outdoors in light-to-medium winds.

Constructed with a sturdy leather brim, the Spacer Cover stays firmly in place when it is mounted. The inside is made of a durable polyester mix, allowing the cover to quickly and easily slide onto the Spacer Bubble base, so you can adapt to on-location changing-wind conditions in just seconds. This polyester mix is tested to ensure the most linear frequencies. When wet, place the Spacer Cover in your Spacer Bubble mesh storage bag where the fur can dry quickly and naturally.

Minimizes Light-to-Medium Wind Noise    Fits The Spacer Bubble Medium    Short-Haired/High-Density Slip-On Fur    Acoustically Transparent Design    Quick-Drying Fur

• Slides onto The Spacer Bubble when recording outdoors in light-to-medium winds
• Easily adapt to your changing surroundings when you are in the field
• Fits in your Spacer Bubble mesh storage bag so you can keep everything close by
• Slip-on fur made from Bubblebee Industries' best imitation fur (high-density of hair)
• Quick-drying fur
• Designed in Denmark by sound lovers, for sound lovers

Related Questions and Answers

Q: 1. Is this a 'good fit' for the RODE Blimp2 ?

A: Yes, this will be a good fit with the Blimp II.

Q: 2. Is this compatible with Sennheiser MKH-50?

A: Yes, the Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, Extra-Small) will fit over the Bubblebee Industries The Spacer Bubble Windshield (Extra-Small/Big Mount), which is the compatible size for the Sennheiser MKH 50 Microphone. The Short-Haired Spacer Cover is not intended to be used by itself. It is intended for use over the Spacer Bubble Windshield. You can purchase both items together, which is the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics (Chroma Key Green, Extra-Small/Big Mount) - B&H # BUBBISBGRXSB.

Q: 3. Will this properly fit on a camcorder Panasonic CX350 with a MKH 416?

A: Yes, the extra-large Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics is compatible for use with the Sennheiser MKH 416 Shotgun Microphone when mounted on the Panasonic AG-CX350 4K Camcorder.

Q: 4. Will this rain cover fit the new Luma 18L camera backpack?

A: Yes, the Nomatic Navigator Medium Rain Cover (Black), B&H # NOACRCMDBLK1, is compatible with the Nomatic LUMA Camera Pack (Black, 18L), B&H # NOLUMCP18LBK.

Q: 5. Can I put the Hi-Wind Cover on the Rode Blimp and additionally add Rode Blimp Windshield(BH #ROBLIMPR) or Rode DeadWombat Windshield(BH #RODEADWOMBAT)?

A: No, the Rycote Hi-Wind Cover is designed to fit directly over the surface of the blimp and not over any additional windshields.

Q: 6. If I attach the LG size Spacer Bubble Windshield and Fur Cover to the AT BP4029 (AT835ST), how much mic shaft will be left?

A: The AT BP4029 is 9.29" long, and the Spacer Bubble Windshield & Fur Cover System has an inner depth of 5.1", so the remaining shaft would be 4.19".

Q: 7. Would it fit an 80D canon?

A: The Canon EOS 80D will fit in the Outex 110 Underwater Camera Cover (Medium) as long as the lens you are using and the camera is not longer than 10.23" (260mm). You do need to add the Outex Rear Glass for Underwater Camera Cover (86mm) and a front glass. Here is the link for the Outex Rear Glass for Underwater Camera Cover (86mm): https://bhpho.to/2FmGU2C The front glass you buy will depend on the lens you are using. For help to pick the correct front glass please email us at uw@bhphoto.com.

Q: 8. Mkh50?

A: No, the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Black, Extra-Small) is not compatible for use with the Sennheiser MKH 50 Microphone. All of the Spacer Bubble models are designed to fit microphones that have a diameter of 18 to 24mm, but the MKH 50 has a 25mm diameter. As a better option, you can use the Rycote Super-Softie Windshield for Shotgun Mics - 5cm, 24/25 (B&H # RYWSQAT), which is designed to fit mics that have a diameter of 24 to 25mm and it is compatible for use with the MKH 50.

Q: 9. Will this fit a sony 24-70 lens?

A: It would fit both Sony 24-70mm lenses (The Zeiss and the GMaster).

Q: 10. Can this Windbreaker be used with the Rycote Super-Blimp Kit for Rode NTG?

A: The Bubblebee Industries The Windbreaker for Rycote Modular Windshield WS 4 Kit is built specifically for the Rycote Modular Windshield WS 4 Kit system. It is not meant to be used with other windshield systems, and compatibility is not guaranteed.