The green, extra-large Bubblebee Spacer Cover for Windshield, Green, Extra-Largeis a fur cover designed to slip over The Spacer Bubble windshield size extra-large and size extra-large/Big Mount, and fit perfectly. Made of high-quality, high-density short-haired faux-fur, it allows for optimal frequency transparency and effective wind protection when recording outdoors in light-to-medium winds.

Constructed with a sturdy leather brim, the Spacer Cover stays firmly in place when it is mounted. The inside is made of a durable polyester mix, allowing the cover to quickly and easily slide onto the Spacer Bubble base, so you can adapt to on-location changing-wind conditions in just seconds. This polyester mix is tested to ensure the most linear frequencies. When wet, place the Spacer Cover in your Spacer Bubble mesh storage bag where the fur can dry quickly and naturally.

Minimizes Light-to-Medium Wind Noise    Fits The Spacer Bubble Extra-Large    Fits Spacer Bubble Extra-Large/Big Mount    Short-Haired/High-Density Slip-On Fur    Acoustically Transparent Design    Quick-Drying Fur

• Slides onto The Spacer Bubble when recording outdoors in light-to-medium winds
• Easily adapt to your changing surroundings when you are in the field
• Fits in your Spacer Bubble mesh storage bag so you can keep everything close by
• Slip-on fur made from Bubblebee Industries' best imitation fur (high-density of hair)
• Quick-drying fur
• Designed in Denmark by sound lovers, for sound lovers

Related Questions and Answers

Q: 1. How much more does the Space Bubble reduce wind noise than the Windkiller? 5db? 10db?

A: Bubblebee Industries has not provided a spec for the exact amount of attenuation provided by The Spacer Bubble, likely because this number would be contingent on multiple factors such as wind speed, direction, microphone sensitivity, and so on.

Q: 2. How should this windshield be stored and transported - what type of case?

A: There is no specific case designed for storing and transporting the windshield, but you could use a hardshell case like those made by Pelican and SKB or use a padded carry bag.

Q: 3. Mkh50?

A: No, the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Black, Extra-Small) is not compatible for use with the Sennheiser MKH 50 Microphone. All of the Spacer Bubble models are designed to fit microphones that have a diameter of 18 to 24mm, but the MKH 50 has a 25mm diameter. As a better option, you can use the Rycote Super-Softie Windshield for Shotgun Mics - 5cm, 24/25 (B&H # RYWSQAT), which is designed to fit mics that have a diameter of 24 to 25mm and it is compatible for use with the MKH 50.

Q: 4. Does it come with the special straw to access tough spots, such as a DSLR mirror?

A: The can should come with a straw. However for a DSLR mirror or other camera internals we do not recommend high pressure air. A bulb blower is much safer https://bhpho.to/2JHmggp.

Q: 5. Is this compatible with Sennheiser MKH-50?

A: Yes, the Bubblebee Industries The Short-Haired Spacer Cover for The Spacer Bubble Windshield (Green, Extra-Small) will fit over the Bubblebee Industries The Spacer Bubble Windshield (Extra-Small/Big Mount), which is the compatible size for the Sennheiser MKH 50 Microphone. The Short-Haired Spacer Cover is not intended to be used by itself. It is intended for use over the Spacer Bubble Windshield. You can purchase both items together, which is the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Shotgun Mics (Chroma Key Green, Extra-Small/Big Mount) - B&H # BUBBISBGRXSB.

Q: 6. Does this wind screen not need a dead wombat like similar models? Or is that a separate purchase?

A: The windjammer may be necessary in certain conditions, and it is sold separately. https://www.bhphotovideo.com/c/product/1083018-REG/rycote_029101_cyclone_windjammer_large.html

Q: 7. What cable adapter do I need to connect to my Sound Devices Mixpre 6?

A: An XLR connector.

Q: 8. Will the WJ-4 fur fit over this shield or is it a different fur windjammer system?

A: The designated windjammer for the Rycote Cyclone Windshield Kit (Medium) is the manufacturer part # 29102; B&H# RYCWJM.

Q: 9. Can I use Rycote Cyclone Medium with Sennheiser MKE600?

A: Rycote recommends using the slightly larger-sized model, which is the Rycote 089101 Cyclone Windshield Kit - Large (B&H # RYCWSKL), as a better match for the Sennheiser MKE 600 Shotgun Microphone.

Q: 10. Is there a size for the Cyclone that will accommodate both an MKH60 and miniCMIT? Or am I better off going for the Modular Windshield?

A: While the Medium Cyclone would work for the miniCMIT, it would be a tight fit for the MKH60. We would recommend going with a Modular Windshield to accommodate both better.