The black, large Bubblebee Spacer Cover for Windshield - Black, Largeis a fur cover designed to slip over The Spacer Bubble windshield size large, and fit perfectly. Made of high-quality, high-density short-haired faux-fur, it allows for optimal frequency transparency and effective wind protection when recording outdoors in light-to-medium winds.

Constructed with a sturdy leather brim, the Spacer Cover stays firmly in place when it is mounted. The inside is made of a durable polyester mix, allowing the cover to quickly and easily slide onto the Spacer Bubble base, so you can adapt to on-location changing-wind conditions in just seconds. This polyester mix is tested to ensure the most linear frequencies. When wet, place the Spacer Cover in your Spacer Bubble mesh storage bag where the fur can dry quickly and naturally.

Minimizes Light-to-Medium Wind Noise    Fits The Spacer Bubble Large    Short-Haired/High-Density Slip-On Fur    Acoustically Transparent Design    Quick-Drying Fur

• Slides onto The Spacer Bubble when recording outdoors in light-to-medium winds
• Easily adapt to your changing surroundings when you are in the field
• Fits in your Spacer Bubble mesh storage bag so you can keep everything close by
• Slip-on fur made from Bubblebee Industries' best imitation fur (high-density of hair)
• Quick-drying fur
• Designed in Denmark by sound lovers, for sound lovers

Related Questions and Answers

Q: 1. How should this windshield be stored and transported - what type of case?

A: There is no specific case designed for storing and transporting the windshield, but you could use a hardshell case like those made by Pelican and SKB or use a padded carry bag.

Q: 2. Can I use Rycote Cyclone Medium with Sennheiser MKE600?

A: Rycote recommends using the slightly larger-sized model, which is the Rycote 089101 Cyclone Windshield Kit - Large (B&H # RYCWSKL), as a better match for the Sennheiser MKE 600 Shotgun Microphone.

Q: 3. Can i use my Pearl MSH 10 microphone in the small model instead the medium ?Dimension of the microphone is 187mm with the xlr cable the total is 24mm.Because i really want the most compact solution.Thank you

A: Hi Jean-Phillipe, the length of the MSH10 + XLR-5f would be too long for the Cyclone, Small as we don't have a short XLR with 5pin yet. The Cyclone, Medium fitted with a Cb4 Connbox & 30mm Lyres however, would work. Cheers

Q: 4. How long is the outer length of the Large size Spacer Bubble Windshield with Fur Cover?

A: The total length of the Bubblebee Industries BBI-SB is about 6.5 inches.

Q: 5. What is the length of the item?

A: The manufacturer has provided dimensions for the inside depth of the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Extra-Small) which is 2.2" (55mm). It can be used with microphones that have a diameter of 0.7 to 0.9" (18 to 24mm).

Q: 6. Is there a size for the Cyclone that will accommodate both an MKH60 and miniCMIT? Or am I better off going for the Modular Windshield?

A: While the Medium Cyclone would work for the miniCMIT, it would be a tight fit for the MKH60. We would recommend going with a Modular Windshield to accommodate both better.

Q: 7. will the "Rycote Stereo Cyclone MS Kit 11 Windshield System for Sennheiser MKH 416 and MKH 30" work with a MKH 416 & MKH 50?

A: Yes, the MKH 30 and MKH 50 have identical dimensions, so the Rycote Stereo Cyclone MS Kit 11 Windshield System will be compatible with either.

Q: 8. How much more does the Space Bubble reduce wind noise than the Windkiller? 5db? 10db?

A: Bubblebee Industries has not provided a spec for the exact amount of attenuation provided by The Spacer Bubble, likely because this number would be contingent on multiple factors such as wind speed, direction, microphone sensitivity, and so on.

Q: 9. Does this wind screen not need a dead wombat like similar models? Or is that a separate purchase?

A: The windjammer may be necessary in certain conditions, and it is sold separately. https://www.bhphotovideo.com/c/product/1083018-REG/rycote_029101_cyclone_windjammer_large.html

Q: 10. Mkh50?

A: No, the Bubblebee Industries The Spacer Bubble Windshield & Fur Cover System for Small-Diaphragm Mics (Black, Extra-Small) is not compatible for use with the Sennheiser MKH 50 Microphone. All of the Spacer Bubble models are designed to fit microphones that have a diameter of 18 to 24mm, but the MKH 50 has a 25mm diameter. As a better option, you can use the Rycote Super-Softie Windshield for Shotgun Mics - 5cm, 24/25 (B&H # RYWSQAT), which is designed to fit mics that have a diameter of 24 to 25mm and it is compatible for use with the MKH 50.