Mount a Laowa PL-mount probe lens onto your L-mount Super 35/APS-C camera with this Laowa 0.7x Focal Reducer for Probe Lens PL to L Mountfrom Venus Optics. This lens mount adapter widens the angle of view by 0.7x and adds one stop to the aperture. When used on a Super 35 camera, it lends the probe lens a 17mm focal length, and if used on a full-frame sensor, it is approximately the equivalent of 25mm. It is constructed with lightweight but durable aluminum and plastic materials.

For PL-Mount Probe Lens    Mount Lens onto L-Mount Camera    Widens Angle of View by 0.7x    Enlarges Aperture to f/10    Eliminates Crop Factor & Adds 1 Stop    Aluminum & Plastic Construction

Designed for mounting the PL-mount Laowa probe lens on a Super 35/APS-C L-mount camera body

Manual adapter that maintains the image quality, which effectively eliminates the crop factor while making available to the sensor an additional one stop of light for each of the lens' f-stop settings

The 0.7x Focal Reducer widens the angle of view by 0.7x, making the focal length of the probe lens 17mm, which is equivalent to around 25mm in full frame using a Super 35 cinema camera

Enlarges aperture to f/10

Aluminum and plastic components for durability and weight reduction

Related Questions and Answers

Q: 1. can i use this focal reducer with Sony FX30 "APS-C camera" and the laowa probe E mount ?

A: The Venus Optics Laowa 0.7x Focal Reducer for Probe Lens (BH #VE07FREF2E) is an EF to E mount, so you'd have to pair it with the EF mount version of the Venus Optics Laowa 24mm T/14 2x PeriProbe (VE2414PEF) for use with the FX30.

Q: 2. Does it work with Red Komodo and Canon Primes?

A: The Venus Optics Laowa 0.7x Focal Reducer for Probe Lens (EF to R Mount) can mount onto the RED DIGITAL CINEMA KOMODO 6K Digital Cinema Camera (Canon RF), but its designed for the Venus Optics Laowa 24mm f/14 Probe Lens for Canon EF, not general Canon EF primes. See the link below: https://bhpho.to/3FWfW0S

Q: 3. can I use this on a Explore Scientific ED102 FCD 100 with a ZWO ASI 1600 MM camera?

A: Yes it should work

Q: 4. Will this work with my Lunt 152mm ED APO f/8 which has a 3 inch Feather Touch focuser?

A: Yes, the ES 0.7x Reducer should work reasonably well with a 3 inch focuser. There are three options for attaching the reducer to a focuser, a 3 inch adapter and two smaller adapters. The upper left cylinder in the product photo is for a 3 inch focuser. It has a 76mm outside diameter and 74mm ID with female threads. The 3 inch adapter screws on to the bottom (scope side) of the reducer. It appears to be designed to either be inserted into the focuser tube or screwed on, depending on your setup. I use it with a 127mm f/7.5 APO and it covers a full frame (35mm) sensor with sharp stars, but with some vignetting in the corners. Two issues I have with the reducer are 1) the T adpater is standard 42mm, as opposed to 48mm, and so produces more vignetting than is necessary given its 3 inch optics. 2) Given the 55mm T adapter shoulder to sensor plane recommendation, there are no 48mm threads or room for a screw in filter. I just ordered and adapter that will allow for screw in filters on the focuser end of the reducer.Hope this helps.

Q: 5. Is this adapter compatible with any other model PL lenses?

A: The Venus Optics Laowa 0.7x Focal Reducer for Probe Lens (PL to X Mount) is designed particularly for the Venus Optics Laowa 24mm f/14 Probe Lens (ARRI PL, Cine-Mod Version), and it is not guaranteed the quality and fitment will retain if using third party PL lenses.

Q: 6. Can this adapter focus to infinity?

A: Yes, the Commlite 0.71x Focal Reducer & Lens Mount Adapter for Canon EF/EF-S Lens to FUJIFILM X-Mount Camera may focus out to infinity.

Q: 7. Is it compatible with X-T200 camera body and EF-S 24mm f2.8 STM, nifty fifity and EF-S 55-250?

A: This Commlite adapter is compatible with the X-T200 and all three of those EF lenses.

Q: 8. Does it work with the periprobe lens?

A: Yes, this adapter will work with EF-Mount PeriProbe lenses.

Q: 9. I have Explore Scientific ED80 80mm f/6 Carbon Fiber APO Refractor Telescope, iOptron SkyGuider Pro EQ Camera Mount, iOptron 1.25" Stainless Steel Tripod, and my camera is Sony A6000, what should I need to make it work?

A: If you want to mount your Sony A6000 body on your scope you will need a Celetron camera mount (B&H# CETA1.25). This will go into the scope in place of the eyepiece. A T-ring which will mount onto the camera body in place of the lens (B&H# VELANEXT). These two pieces will now screw together.

Q: 10. When mounted on a canon cne 18-80 lens on a lumix bs1h camera, Does the quality of the image will weaken becuase the glass ?

A: The Venus Optics Laowa 0.7x Focal Reducer for Probe Lens (EF to L Mount) is only meant to mount the Probe Lens from Venus Optics and none other. We cannot guaranty any quality results of mounting another lens onto your desired system with this adapter.